K-Sweep - Cinak

Instructions
Push the ON/OFF button to turn the machine on and off. Turn
the amplitude button to set the height of the green light, so that
it starts moving up and down. Set the frequency of the flashing of
the green light between 7 Hz and 12 Hz by turning the pulse
button. The higher the laser line, the higher the frequency. 1.5
seconds after the setting is done, the treatment starts and the
green line starts moving. When you turn the machine off, it will
memorize the values set and will start working according to these
values when it is switched on the next time.
The machine works with rechargeable battery. If the bat
indicator is red, the battery is running low. While charging the
battery, the bat indicator is flashing until the battery is charged.
CINAK
Centre International de Neurobiologie Appliqué selon le
Dr. Klinghardt
International Center for Applied Neurobiolog according to
Dr. Klinghardt
Internationales Zentrum für Neurobiologie nach Dr. Klinghardt
Presents :
K-Sweep
WHERE TO PURCHASE IT
You can purchase K-Sweep from:
CINAK
Chemin des Semailles 47
1212 Grand-Lancy
Genève- Switzerland
Tel: +41 (0) 22 796 94 64
Email: info@cinak.com
Green Light Machine to scan quicker the entire
system and find new treatment solutions!

SOME HISTORY…
THE scanning with the green light has its origins in
science. Studies showed: if injured neurons are scanned with
an exact frequency, they start to emit completely normal
action potentials as if the nerve was healthy. Moreover, the
injury healed much faster, and negative long term effects did
not occur.
According to Dr. Klinghardt, MD, PhD, many doctors already
work with the green light, using a glass rod to break the
beam into a scanning line. This allows the practitioner to
scan the entire system of the patient within a very short
amount of time. Dr. Klinghardt repeatedly confirmed a deep
and lasting effect of the green light scan on the healing of
the nerve tissue. He observed many other positive effects:
the reorganization of the system with food allergies,
detoxification, resurfacing of suppressed emotions and
memories.
HOW DOES IT WORK
Process
DIFFERENT remedies are
scanned into the system during
the green light session, so that
the body reacts as if it had
actually received these remedies.
The treatment time is about 20-
25 minutes. The patient then needs to be retested over
several hours or even days in order to find out how long the
effect lasts, and to be re-scanned when it decreases. Usually
the effect lasts as long as it would have lasted if the patient
had physically taken the drug. However, there are some
exceptions where it remains important for the patient to
take the substance, even if the necessary dosage of it can be
reduced by scanning at regular intervals.
To make the treatment available for everyone, we designed
a machine, K-Sweep, making a sweeping movement, so no
extra person is needed to scan the patient.
After turning the machine ON, the green light will start
moving according to your setting, so you can do it on your
own!