User Guide - Neopost
User Guide - Neopost
User Guide - Neopost
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Pos: 69 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Troubleshooting (all printers)/8.2a_Ü3_The device cannot be turned on @ 3\mod_1280834344948_912.doc @ 24470 @ 2<br />
Pos: 70 /Bedienungsanleitungen/Geräte spezifisch/8.2b_Sicherungswechsel_250V 2.5A T_KG5101.008_Table Top Drucker @ 3\mod_1280833946989_912.doc @ 24464 @<br />
Pos: 71 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Troubleshooting (all printers)/Printing/8.2.X_Ü3_Weak_printout_due_to_worng_ink_type_selected_ALL PRINTERS @ 2\mod_1276846566086_912.doc @ 18721 @ 3<br />
8.1.4 Troubleshooting<br />
8.2 The device cannot be turned on<br />
Condition Problem Solution<br />
The device cannot be turned<br />
on and gets no power.<br />
The power is cut or the fuses<br />
were activated.<br />
Check the correct connection<br />
of the power cable.<br />
Check the fuses of the<br />
device.<br />
Fuse exchange<br />
Attention!<br />
Disconnect the device from the power outlet before exchanging the<br />
fuses.<br />
Data<br />
Type<br />
Dimensions<br />
Voltage<br />
Glass tube microfuse<br />
5 x 20 mm<br />
250 V<br />
2.5 A (T)<br />
Figure 1: Exchange of the fuses<br />
Amount 1<br />
(one additional fuse<br />
included as spare)<br />
Use a flat screwdriver to take the fuse holder with the two small<br />
microfuses out of the power input module. The inner fuse is in use,<br />
while the outer fuse is only a spare. Change the blown fuse and insert<br />
the holder again.<br />
<strong>User</strong> Manual Version 3.1 93