User Guide - Neopost
User Guide - Neopost
User Guide - Neopost
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pos: 63 /Bedienungsanleitungen/Geräte neutral/8.1_Ü2_Maintenance and support @ 0\mod_1251203636132_912.doc @ 3106 @ 2<br />
Pos: 64 /Bedienungsanleitungen/Geräte spezifisch/Drucker/8.1.x_Cleaning_the_paper_sensor_REFLECTOR @ 2\mod_1265711553389_912.doc @ 11755 @<br />
Pos: 65 /Bedienungsanleitungen/Geräte spezifisch/Drucker/8.1.2_Ü3_Cleaning the ink cartridge @ 1\mod_1261065320023_912.doc @ 8975 @ 3<br />
8 Service<br />
8.1 Maintenance and support<br />
Cleaning the<br />
paper sensor<br />
(Top of Form<br />
Sensor)<br />
It is highly recommended to check and clean the paper sensor every day.<br />
• Check if the LED on the paper sensor is flashing when you push a<br />
material under the sensor.<br />
• Clean the sensor as well as the reflection foil from paper dust and<br />
dirt.<br />
8.1.1 How to clean an ink cartridge<br />
Damage to the ink cartridge<br />
Wrong cleaning leads to damaged ink cartridges and bad print<br />
quality. Please stick to the described cleaning instructions of this <strong>User</strong><br />
Manual.<br />
Please do not use chemical solvents or any cleaning agents. Furthermore do not use paper<br />
towels, toilet paper, sponges, dry cloths or any other textiles with small abrasive fibers for<br />
the cleaning of the cartridge nozzles.<br />
Recommended cleaning utilities<br />
• Use only fiber-free tissues for cleaning the ink cartridge nozzles<br />
(see chapter 9.1 Consumables, on page 124). Please follow the<br />
instructions below.<br />
• Use only pure distilled water to damp the cleaning cloth. The water<br />
can etch dried ink residues and may reactivate clogged nozzles.<br />
Cleaning the<br />
nozzle plate<br />
• Dampen the cleaning cloth with a small amount of distilled water.<br />
• Cautiously press the cartridge nozzles onto the tissue and wait<br />
until the cloth soaks up a small amount of ink.<br />
• Slowly wipe the cartridge nozzles on the tissue surface, in the<br />
direction of the nozzle rows (see Figure 51).<br />
• Optional: Insert the cleaned ink cartridge into the printer and use<br />
the CLEAN HEADS function (Quick + Arrow down ) to purge<br />
the nozzles.<br />
<strong>User</strong> Manual Version 3.1 89
Change language