User Guide - Neopost
User Guide - Neopost
User Guide - Neopost
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Pos: 62 /Bedienungsanleitungen/Geräte neutral/8.0_Ü1_Service @ 0\mod_1251192378636_912.doc @ 3024 @ 1<br />
• Deactivate the item “Internet Protocol Version 6 (TCP/IPv6)” and<br />
then select the “Internet Protocol Version 4 (TCP/IPv4)” and click<br />
onto “Properties” (see Figure 49)<br />
• Select “Use the following IP address:” and enter the following<br />
values (see Figure 50):<br />
IP address: The first three parts of the address must be the same<br />
as in the printer. The last part must be different!<br />
Subnet mask: Same as in the printer.<br />
Default gateway: Must be the same as the IP address in the<br />
printer.<br />
• Click onto “OK” and wait until the connection to the printer is<br />
established.<br />
Figure 49: Local Area Connection Properties<br />
Figure 50: TCP/IPv4 settings<br />
5. Install and<br />
configure the<br />
printer driver<br />
• Install and configure the printer driver for your printer model as<br />
described in chapter 7.1 on page 76.<br />
88 <strong>User</strong> Manual Version 3.1