User Guide - Neopost
User Guide - Neopost
User Guide - Neopost
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7.5.1 Using a fixed IP address<br />
1. Printer<br />
settings “fix<br />
IP”<br />
• Open the main menu of the printer with the Home key.<br />
• Open the menu PRINTER CONFIG. > BOOT DEFAULTS ><br />
COMMUNICATION > TCP/IP.<br />
• In this menu select the setting fix IP.<br />
In the next menu you can set the values for Port Number, IP<br />
Address, Subnet Mask and Gateway IP Address.<br />
Port number<br />
IP Address<br />
Subnet Mask<br />
Gateway IP Address<br />
The default port 9100 is commonly used by printers. Please make<br />
sure that this port is not blocked in your LAN or use a port number<br />
that is accessible in your LAN.<br />
Please enter an IP address that is valid with your LAN.<br />
Please enter the Subnet Mask of your LAN.<br />
Please enter the IP address of the server of your LAN.<br />
2. Enter/<br />
change the<br />
default<br />
settings<br />
• The printer default values are shown below.<br />
Port Number: 9100<br />
IP Address: 192.168.50.180<br />
Subnet Mask: 255.255.255.0<br />
Gateway IP Address: 192.168.50.180<br />
• Confirm any changes to the values by pressing the Ok key. Now<br />
press the Cancel key until the main view is shown in the display.<br />
• Press the Ok key to turn the printer online. The bottom line of<br />
the display must now show: OnlinTCP<br />
84 <strong>User</strong> Manual Version 3.1