User Guide - Neopost
User Guide - Neopost
User Guide - Neopost
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Correct IP address syntax<br />
Don’t enter the unnecessary “0” digits of the IP address in the<br />
properties window. If the IP address is not entered correct, the PC<br />
cannot establish a connection to the printer.<br />
Example:<br />
NOT correct: 192.168.005.008<br />
Correct: 192.168.5.8<br />
3. Check<br />
customs<br />
settings<br />
• After the detection select “Custom” and click on “Settings…” (see<br />
Figure 44).<br />
• Set the “Port number” to the same value as set in the printer.<br />
Then click on “OK”. Make sure the Protocol is set to “RAW” (See<br />
Figure 45. This figure only shows a sample IP address. Make sure<br />
to enter the IP address used in your installation).<br />
• Check the settings and click on “Finish”.<br />
Figure 44: Custom settings<br />
Figure 45: Custom settings of printer port<br />
• Now this printer driver is ready to send data via the TCP/IP port.<br />
Make sure that the box at the new “Standard TCP/IP Port” is<br />
checked (see Figure 46).<br />
• To use the Ethernet connection for printing, select this printer<br />
driver in your software application.<br />
82 <strong>User</strong> Manual Version 3.1
Change language