User Guide - Neopost
User Guide - Neopost
User Guide - Neopost
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pos: 60.78 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_3204_Ram Contin. @ 0\mod_1254915740236_912.doc @ 5007 @<br />
Pos: 60.79 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_3205_NV-Ram Cont. @ 0\mod_1254915736642_912.doc @ 4983 @<br />
Pos: 60.80 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_3212_Encoder @ 0\mod_1254916090905_912.doc @ 5039 @<br />
Pos: 60.81 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_3214_Speed Measurement_All_Printers_except_Orbit @ 1\mod_1255683471390_912.doc @ 6627 @<br />
Pos: 60.82 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_3219_Paper Sensor @ 0\mod_1254916094577_912.doc @ 5067 @<br />
Pos: 60.83 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_3220_Sensor&Paper Run @ 1\mod_1255684001736_912.doc @ 6647 @<br />
Pos: 60.84 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_3234b_Cartridges_Fixed Head @ 0\mod_1254916801839_912.doc @ 5099 @<br />
Ram<br />
The printer will test its internal memory.<br />
Ram Contin.<br />
The printer will test its internal memory.<br />
NV-Ram Cont.<br />
The printer will test its internal memory.<br />
Encoder<br />
The printer will start its transport and test the encoder signals.<br />
Speed Measurment<br />
This feature is used to check the currently set speed. The printer will start the transport<br />
with the currently set speed (e.g. 1.080 Meter/Second 212.5 Feet/Minute) and display<br />
the actual measured speed in the display.<br />
Paper Sensor<br />
This feature is used to check the status of the paper sensor (top of form sensor).<br />
Status<br />
Sensor is free<br />
Sensor is not free<br />
Note<br />
The sensor detects no material.<br />
The sensor detects material.<br />
Sensor&Paper Run<br />
The printer will start its transport, the feeder and count all TOF sensor signals (= materials)<br />
it detects. You should count the number of materials in the feeder before starting this test,<br />
so you can check the result. When the test is finished all lines of the display must show the<br />
same number. And this number must be the same number as the amount of materials in<br />
the feeder before the test.<br />
Requirements for this test<br />
The material must have a size of at least 200 mm / 7.8“ in transport<br />
direction. The material should be unprinted and unicolour.<br />
<strong>User</strong> Manual Version 3.1 63