User Guide - Neopost
User Guide - Neopost
User Guide - Neopost
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pos: 60.35 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_1605_WARMING CARTRIDGE_All Printer @ 0\mod_1254912882048_912.doc @ 4819 @<br />
Pos: 60.36 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Menü_Drucker_Hinweis_Nicht "Lock"-bar @ 0\mod_1254823525509_912.doc @ 4313 @<br />
Pos: 60.37 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_1606_PREWARMING CARTR._All Printer @ 0\mod_1254912880610_912.doc @ 4807 @<br />
Pos: 60.38 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Menü_Drucker_Hinweis_Nicht "Lock"-bar @ 0\mod_1254823525509_912.doc @ 4313 @<br />
RESET INK LEVEL<br />
This feature is used to reset the calculated ink level of a cartridge. Choose All Units for a<br />
total reset or select individual cartridges to restore their ink level.<br />
This reset should only be done when inserting a new, full cartridge. Otherwise the ink level<br />
bar in the display will not show a correct filling level.<br />
This feature is only accurate if it is used correctly. When cartridges<br />
are removed for cleaning and storage they must be returned to the<br />
location they were originally installed.<br />
Suggestion: Label each cartridge (U1C1, U1C2, …)<br />
When a new cartridge is installed the ink level for the corresponding<br />
cartridge position must be reset.<br />
WARMING CARTRIDGE<br />
With this option activated, the printer will send warming pulses to non-printing printhead<br />
nozzles. The warming will only be applied if the printhead temperature drops under a<br />
certain value, and only idle nozzles will be heated.<br />
The option ensures that non-printing nozzles keep a certain temperature during the whole<br />
print job time. The temperature affects the viscosity of the ink. Providing a constant<br />
temperature can improve the print quality.<br />
off, on<br />
Default: on<br />
When using a software application that was designed to control this<br />
feature (e. g. Flexmail, BulkMailer), this configuration will be<br />
overwritten with the settings of the software.<br />
In this case use the software options to configure the printer.<br />
PREWARMING CARTR.<br />
With this option activated, the printer will send a preheat pulse to all nozzles of the<br />
cartridge, right before starting a print job.<br />
This function avoids cold starting of the printhead. The cartridge instantly gets heated up<br />
and the quality of the first print impulses will be improved.<br />
on, All Units<br />
Default: on<br />
When using a software application that was designed to control this<br />
feature (e. g. Flexmail, BulkMailer), this configuration will be<br />
overwritten with the settings of the software.<br />
In this case use the software options to configure the printer.<br />
52 <strong>User</strong> Manual Version 3.1