User Guide - Neopost
User Guide - Neopost
User Guide - Neopost
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pos: 60.25 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Menü_Drucker_Warning_Factroy_setting @ 1\mod_1259054235982_912.doc @ 7641 @<br />
Pos: 60.26 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü2/Ü2_1500_BOOT_DEFAULTS @ 0\mod_1254483976902_912.doc @ 4057 @<br />
ADJUST TOF<br />
The “Top of form” (TOF) sensor or paper sensor detects the edge of every fed paper and<br />
controls the timing of the print heads. To ensure a correct positioning of the printed image<br />
an adjustment value is set in this menu.<br />
To make an adjustment press Quick + (Test Print). The AS-830 will now print an<br />
adjustment page with the one print cartridge, closest to the feeder. Measure the distance<br />
between the paper edge and the printed bars. See Figure 22 below. Enter the measured<br />
distance in the printer menu and press the Ok button.<br />
Figure 22: ADJUST TOF test print<br />
Factory setting<br />
This is a default setting, entered at the initiation of the machine in the<br />
factory. The user should change this setting only in case of a printer<br />
malfunction and after consulting a technician.<br />
48 <strong>User</strong> Manual Version 3.1
Change language