User Guide - Neopost
User Guide - Neopost
User Guide - Neopost
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pos: 60.7 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Quick Menü/Ü2_6007_RUN PAPER @ 0\mod_1254923965108_912.doc @ 5282 @<br />
Pos: 60.8 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Quick Menü/Ü2_6009_TEST PRINT @ 0\mod_1254923966653_912.doc @ 5286 @<br />
Pos: 60.9 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Quick Menü/Ü2_6010a_CLEAN HEADS_830/930/960/990/Orbit/OrbitB @ 1\mod_1257425319325_912.doc @ 7249 @<br />
Pos: 60.10 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Quick Menü/Ü2_6011_PURGE HEADS_AS-830/930 @ 1\mod_1258121533146_912.doc @ 7547 @<br />
PAPER MEASUREMENT<br />
The printer will measure the paper width.<br />
Therefore please put one sheet of paper in the feeding position. After the measurement the<br />
printer will display the detected paper width.<br />
If you wish to lock the measured value in the printer, press the Ok button for 2 seconds<br />
(the PC software settings will not affect the printer set values).<br />
You can also use the following key combinations:<br />
Quick +<br />
Quick +<br />
(short) = PAPER MEASUREMENT<br />
(long) = PAPER MEASUREMENT (locked)<br />
RUN PAPER<br />
The printer will feed and transport paper continuously until you hit the Cancel<br />
key.<br />
• Select RUN PAPER in the QUICK MENU and hit the Ok key.<br />
• Hit the Cancel key to stop the printer.<br />
You can also use the following key combination:<br />
Quick + Arrow left (long) = RUN PAPER<br />
TEST PRINT<br />
The printer will do test prints with the set test pattern. To see which pattern is set go to the<br />
menu SERVICE > SELECT TEST PATT. Please hit the Cancel key to stop the printer.<br />
• Select TEST PRINT in the QUICK MENU and hit the Ok key.<br />
• Hit the Cancel key to stop the printer.<br />
You can also use the following key combination:<br />
Quick + Arrow up (long) = TEST PRINT<br />
CLEAN HEADS<br />
The printer will perform a cleaning cycle.<br />
One sheet of paper will be fed into the printer and all printheads will shoot a small amount<br />
of ink onto it. This function is useful to clear clogged nozzles.<br />
Please make sure to put the print units in a position, where the ink will hit the paper.<br />
• Select CLEAN HEADS in the QUICK MENU and hit the Ok key.<br />
You can also use the following key combination:<br />
Quick + Arrow down = CLEAN HEADS<br />
<strong>User</strong> Manual Version 3.1 41