10.01.2015 Views

User Guide - Neopost

User Guide - Neopost

User Guide - Neopost

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Pos: 49 /Bedienungsanleitungen/Geräte spezifisch/Drucker/5.2b_How to install the ink cartridge_Allgemein @ 1\mod_1261387630600_912.doc @ 10024 @<br />

Pos: 50 /Bedienungsanleitungen/Geräte spezifisch/Drucker/AS-830/5.3_How to setup the feeder_AS-830 @ 2\mod_1268403755352_912.doc @ 13369 @ 2<br />

5.2 How to install the ink cartridges<br />

Cartridge mounting<br />

The restraining lever ensures a safe contact between the ink cartridge<br />

and the electronics of the AS-830.<br />

Please do not force the ink cartridge to its final position by hand<br />

To avoid connection problems and damage, please install the<br />

cartridge as seen in Figure 6 and Figure 7.<br />

Figure 6: Inserting the ink cartridge into the<br />

pen stall<br />

Figure 7: Lock the restraining lever<br />

Installing the<br />

ink cartridge<br />

Please put the cartridge into the mounting (pen stall), by cautiously<br />

pushing it downwards in a straight movement. Do not force or press the<br />

cartridge back into its pen stall by hand.<br />

The cartridge should be in a slightly inclined position. The restraining<br />

lever then tilts the cartridge into its final position.<br />

• Open the restraining lever completely.<br />

• Take the ink cartridge out of the packaging and remove the<br />

protection tape from the print nozzles.<br />

• Insert the ink cartridges one after another with the print nozzles<br />

facing downwards - do not push in the direction of the restraining<br />

lever.<br />

• Lock the lever in direction of the arrow as shown in Figure 7. Thus,<br />

the ink cartridge is tilted into its final position, and the contact is<br />

established correctly.<br />

Setting the ink<br />

type<br />

To ensure the best performance of the ink cartridge the correct ink type<br />

must be set up in the printer. To set the ink type open the menu<br />

PRINTER CONFIG. > INK > SET INK TYPE<br />

Handling ink cartridges<br />

Do not touch the contacts or the nozzle plate of an ink cartridge. This<br />

may lead to reduced print quality.<br />

Ink cartridges<br />

We recommend to use only supported <strong>Neopost</strong> inks in connection<br />

with this printer. Refilled ink cartridges may result in bad printing<br />

quality and may damage the printer.<br />

Please see chapter 9.1 Consumables, on page 124 for applicable ink cartridges.<br />

26 <strong>User</strong> Manual Version 3.1

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!