User Guide - Neopost

Pos: 43 /Bedienungsanleitungen/Geräte spezifisch/Drucker/4.4.3_Additional Display Texts_HINWEIS_Table Top @ 2\mod_1275402350991_912.doc @ 17865 @
Pos: 44 /Bedienungsanleitungen/Geräte neutral/5.0_Ü1_Initial start-up of the device @ 0\mod_1246014198984_912.doc @ 1931 @ 1
8: Status This line shows the printer status and the used
interface.
OnlinUSB The printer is ready to receive print data
from the PC via the USB interface. No changes to
printer settings via a printer menu can be made when
the printer is Online.
OnlinTCP The printer is ready to receive print data
from the PC via the Ethernet interface. No changes to
printer settings via a printer menu can be made when
the printer is Online.
Offline The printer menus can be accessed and
changes to settings can be made when the printer is
Offline.
Changing from OnlinUSB or OnlinTCP to Offline: Hit
the Cancel key.
Changing from Offline to Online: Select this line
(line 8) in the main menu (see Figure 5 above) by
hitting the Cancel key or using the arrow down
key and then hit the Ok key.
9: Ink level cartridge The height of the bars, shows the calculated amount
of ink left per cartridge.
To see the exact percentage of ink left, select one of
the bars with the arrow left key. To manually
change the amount of ink left in the cartridge, change
the value with the arrow up or arrow down keys.
You can access the cartridge menu by selecting one of
the bars with the arrow left key and hitting the Ok
key. In this menu you can reset the amount of ink
to 100% or change the ink type.
Additional display texts
Under certain circumstances additional texts may be shown in the
display. Please see chapter 11.7 Additional display texts, on page
147.
24 User Manual Version 3.1