User Guide - Neopost

3: Transport speed This line shows the currently set transport speed. To
change the speed select this line and use the arrow
right or arrow left key to change the speed.
Please note that the speed you can select is limited by
the set print quality (see line 6). With a print quality
of 6 x 6 dpi, the maximum speed you can set is 0.540
meter/second.
4: Not used ---
5: Ink type This line shows the currently set ink type.
6: Print quality This lines shows the currently set print quality. To
change the quality select this line and use the arrow
right or arrow left key to change the quality.
Please note that the selected print quality determines
the maximum speed of the machine.
This setting can be locked, so that a print quality
setting, sent from the PC is ignored. To lock this
setting, select this line and press the Ok key for
three seconds. A symbol appears next to the
quality setting, showing that it is locked now.
To unlock the setting select this line again and press
the Ok key for three seconds. The symbol
disappears again.
7: Print direction This line shows the set print direction.
Nor The print layout is printed in normal direction.
Rev The print layout is printed 180° turned.
Please refer to the section “Menu” of this manual, to
get more detailed information about print direction.
This setting can be locked, so that a print direction
setting, sent from the PC is ignored. To lock this
setting, select this line and press the Ok key for
three seconds. A symbol appears next to the
direction setting, showing that it is locked now.
To unlock the setting select this line again and press
the Ok key for three seconds. The symbol
disappears again.
User Manual Version 3.1 23