User Guide - Neopost
User Guide - Neopost
User Guide - Neopost
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Pos: 105 /Bedienungsanleitungen/Geräte spezifisch/Drucker/11_x_Ü2_Additional information texts in main display_Table_Top_printers @ 2\mod_1271235880723_912.doc @ 14712 @ 2<br />
6. Starting the<br />
printer for the<br />
first time after<br />
the update<br />
• If you were updating from a flashware version < 4.7 then perform<br />
the steps below. If not continue with step “7. Checking the<br />
flashware version”.<br />
• Press and hold the Home key and turn on the printer. This<br />
will perform a default reset.<br />
• Keeping holding the Home key until the printer shows<br />
Printer Name<br />
Default Reset<br />
• Use the Setting Dump, printed at the beginning of this process,<br />
to set the previous mechanical alignment values.<br />
7. Checking<br />
the flashware<br />
version<br />
• Check the now installed flashware version in the printer menu:<br />
SERVICE > CONFIGURAT. INFO > Firmware:<br />
• Now the flashware update is completed.<br />
IMPORTANT!<br />
If an error message appears during the update process, just turn the<br />
printer off and on. Check if you are sending a compatible Flashware<br />
file. Try to resend the file.<br />
146 <strong>User</strong> Manual Version 3.1