User Guide - Neopost
User Guide - Neopost
User Guide - Neopost
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
11.4.1 Sample settings for Ethernet connection<br />
The tables below show sample settings for the different possible usages of the Ethernet<br />
connection. Each table shows examples for the settings that have to be made in:<br />
• The printer menu.<br />
• The PC used to send data to the printer.<br />
• The printer driver on the PC used to send data to the printer. In order to make the<br />
necessary settings, you need to a TCP/IP port to a printer driver.<br />
11.4.1.1 Network connection between the printer (using a fixed IP) and the PC<br />
Printer settings PC settings Printer driver settings<br />
Port<br />
9100 The PC must be<br />
Port 9100<br />
number*<br />
properly connected number<br />
IP<br />
192.168.050.180 to the same local IP<br />
192.168.5.180<br />
Address**<br />
area network as<br />
Address<br />
Subnet 255.255.255.000<br />
the printer.<br />
Mask<br />
Gateway 192.168.050.180<br />
IP<br />
Address<br />
* The default port 9100 is commonly used by printers. Please make<br />
sure that this port is not blocked in your LAN or set to a port number<br />
that is used in your LAN.<br />
** The IP Address set in the printer must be valid in your LAN and<br />
must be permanently assigned to the printer in your LAN. Please<br />
contact your company’s network administrator for support.<br />
11.4.1.2 Network connection between the printer (using a dynamic IP) and the<br />
PC<br />
Printer settings PC settings Printer driver settings<br />
Port<br />
9100 The PC must be<br />
Port<br />
9100<br />
number*<br />
properly connected<br />
to the same local<br />
number<br />
IP<br />
192.168.5.180<br />
area network as the<br />
Address*<br />
*<br />
printer.<br />
138 <strong>User</strong> Manual Version 3.1