User Guide - Neopost
User Guide - Neopost
User Guide - Neopost
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pos: 100.5 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Printer Driver & Cables to PC/TCP /IP (619)/7.X.X_Ü3_How to test the Ethernet connectivity_ONLY_619 @ 3\mod_1296547073221_912.doc @ 29844 @ 2<br />
Figure 59: Device Manager<br />
Figure 60: Device Properties - Details<br />
11.4 How to test the Ethernet connectivity<br />
Using the „ping“ command in the Windows Command Prompt, is an easy way to test the<br />
Ethernet connectivity of the printer. With this command you can test if the printer is<br />
correctly recognized via the Ethernet connection. To test the Ethernet connectivity perform<br />
the following steps.<br />
1. Check the<br />
IP address of<br />
the printer<br />
• To test the Ethernet connectivity of the printer you need the exact<br />
IP address which the printer uses.<br />
• To check the printer’s IP address got to the printer menu:<br />
SERVICE > CONFIGURAT. INFO<br />
• Note down the printer’s IP address.<br />
2. Open the<br />
Windows<br />
command<br />
prompt<br />
• On your PC select START > All Programms > Accessories ><br />
Command Prompt<br />
• Or type “cmd” in the search box of the Windows Start menu.<br />
• The Command prompt will open.<br />
136 <strong>User</strong> Manual Version 3.1