User Guide - Neopost

Pos: 10 /Bedienungsanleitungen/Geräte spezifisch/Drucker/1.3_Ü2_Terms and abbreviations @ 1\mod_1260869177556_912.doc @ 8380 @ 2
Pos: 11 /Bedienungsanleitungen/Geräte spezifisch/Drucker/1.4_Ü2_System requirements_ONLY_619 @ 2\mod_1272530190780_912.doc @ 17229 @ 2
Pos: 12 /Bedienungsanleitungen/Geräte neutral/2.0_Ü1_Sicherheitshinweise @ 0\mod_1242735234414_912.doc @ 1664 @ 1
1.2 Notes for use of this manual
This manual is structured chronologically, and therefore ordered sequentially from the
receipt of the machine packed up to its ready-for-use state.
If you are unfamiliar with the machine, it is best to read through the manual from beginning
to end, where you can follow easy step by step instructions to allow you to fully and
correctly operate the machine.
If you are already familiar with the AS-830, it will make things easy if you to use this
manual as a reference work.
1.3 Terms and abbreviations
This User Manual uses the following terms and abbreviations related to the Neopost AS-
830:
• cartridge = Crt = C, C1, C2, C3
• print unit = Unit = U, U1, U2
A print unit always consists of three ink cartridges.
• print media width = expansion of the print media in transport direction.
• print media height = expansion of the print media across the transport direction.
1.4 System requirements
The Neopost AS-830 is designed to be used in connection with a PC. To connect the AS-830
to the PC one free USB port or one free Ethernet (TCP/IP) port is required. The PC should be
an up-to-date model and must have enough processing power and free disk space to run
the Neopost Addressing Solutions Software.
We recommend using one of the following operating systems:
• Microsoft Windows 2000 (SP4)
• Microsoft Windows XP (SP3)
• Microsoft Windows Vista (SP2) (32- or 64-bit)
• Microsoft Windows 7 (32- or 64-bit)
10 User Manual Version 3.1