ZXP Series 7 User's Manual (en) - Hant

4: Printer Settings and Adjustments
Printing Preferences
Overlay Varnish Options
Overlay varnish is a durable layer of film applied to printed cards that reduces fading by
protecting the image from UV exposure.
The Overlay Varnish pop-up allows you to manage and configure the use of the Overlay when
the selected Ribbon Combination shows the O panel (e.g. YMCKO).
To access the Overlay Varnish pop-up window, select Start > Devices and Printers. Right
click on the Zebra ZXP Series 7 Card Printer listing, and select Printing preferences > Card
Setup. Select Ribbon info ... > Front Overlay ... or Back Overlay ...
Select the overlay varnish type - Option selection for applying overlay varnish ribbon to a
card. Default setting is Full overlay varnish.
There are various varnish options. A preview pane is shown for each selection.
- Disable overlay - Disables the overlay option; i.e., does not apply any overlay.
- Full overlay varnish (default) - Applies an edge-to-edge overlay.
- Selected area blank - Applies overlay only outside the area selected by user.
- Selected area overlay varnish - Applies overlay only in the area selected by user.
- Bitmap based overlay varnish - Applies a user-defined 1-bit monochrome bitmap as
an overlay.
- Smartcard ISO - Does not apply overlay on the area of the smartcard chip.
- Smartcard AFNOR - Does not apply overlay on the area of the smartcard chip.
- Magnetic Stripe - Does not apply overlay on the area of the magnetic stripe.
82 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-001