ZXP Series 7 User's Manual (en) - Hant

3: Operation
Operator Control Panel (OCP)
Network Settings Menu
Main Menu
RETURN WITHOUT SAVE
SAVE SETTINGS
DHCP MODE
Enable or disable the DHCP Mode.
SET IP ADDRESS
Change the IP Address.
SET SUBNET MASK
Change the Subnet Mask.
SET DEFAULT GATEWAY
Change the GW (Gateway).
Network Settings Menu
UP DOWN SELECT
• Press the UP button to move up the menu list
• Press the DOWN button to move down the menu list
• Press the SELECT button to select the item from the list
P1036101-001 Zebra ZXP Series 7 Card Printer User’s Manual 59