ZXP Series 7 User's Manual (en) - Hant

3: Operation
Operator Control Panel (OCP)
Info Menu
INFO Button
(Operating Mode Display)
PRINTER INFO
Displays MCB FW Ver, MAB FW Ver, MSN (Machine Serial Number),
PH S/N (Printhead Serial Number).
NETWORK INFO
Displays DHCP, IP, Mask, GW, and MAC.
RIBBON INFO
Displays Type, # Images, and % Remaining.
PRINTHEAD USAGE
Displays Card Count and Printhead Lines.
REJECT BIN
Displays number of cards in Reject Bin (Card Count = n).
CONFIGURATION INFO
Lists RAM, Single or Dual Sided, and Options Installed: Mag, Encoder, Laminator.
LAMINATOR INFO *
Displays LCB, MAB, Serial Number, Top installed (yes/no), Bottom installed (yes/no).
TOP LAMINATE INFO *
Displays P/N, Type, # Images, and % Remaining.
BOTTOM LAMINATE INFO *
Displays P/N, Type, # Images, and % Remaining.
LAMINATOR TEMPERATURE *
Displays Settings: Top and Bottom temperature; and Current: Top and Bottom temperature.
LAMINATOR ODOMETER *
Unit on (# days), Top on (# days), Bottom on (# days), # Laminated, # Processed.
CAL LUT INFO
Displays info for LUT 1 (Look-Up Table 1), LUT 2 (Look-Up Table 2), and Color Collaboration.
CLEANING DUE
Displays # Cards since last cleaning of Card Path, Feeder Path, Printhead, Laminator Path*, and
Laminator Oven*.
* Only applies to Printers with a Laminator.
Info Menu
PREV NEXT EXIT
• Press the PREV button to move up the menu list
• Press the NEXT button to move down the menu list
• Press the EXIT button to return to the Operating Mode Display
P1036101-001 Zebra ZXP Series 7 Card Printer User’s Manual 57