ZXP Series 7 User's Manual (en) - Hant

2: Installation and Setup
Loading the Laminate
Step 7.
Step 8.
Step 9.
Pull out an inch or two of laminate past the lip of the cassette.
Close the cassette by firmly pressing the “clamshell” together. You will hear a click
and feel a detent when the halves of the cassette seat together.
Cut the laminate square (as close to perpendicular as possible) with scissors. Hold the
scissors in one hand. Hold the cassette with the other hand. Press the laminate firmly
against the white roller thereby keeping the laminate from moving while cutting.
24 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-001