ZXP Series 7 User's Manual (en) - Hant
ZXP Series 7 User's Manual (en) - Hant
ZXP Series 7 User's Manual (en) - Hant
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2: Installation and Setup<br />
Loading the Laminate<br />
Loading the Laminate Cassette(s)<br />
Step 1.<br />
Remove a new roll of laminate from its packaging. There are two differ<strong>en</strong>t laminate<br />
rolls, one for the Upper Cassette (Blue) and one for the Lower Cassette (Yellow).<br />
Important • The geared flange on the laminate spool is removable, but do not remove it. If it<br />
does come off, snap it back onto the <strong>en</strong>d of the spool.<br />
Step 2.<br />
Place the roll of laminate in the Upper Laminate Cassette (pres<strong>en</strong>t on both the<br />
single-sided laminator and dual-sided laminator). Note the ori<strong>en</strong>tation of the laminate<br />
spool with respect to the laminate cassette as shown in the figure below.<br />
Step 3.<br />
Step 4.<br />
Step 5.<br />
Step 6.<br />
Pull out an inch or two of laminate past the lip of the cassette.<br />
Close the cassette by firmly pressing the “clamshell” together. You will hear a click<br />
and feel a det<strong>en</strong>t wh<strong>en</strong> the halves of the cassette seat together.<br />
Remove a second new roll of laminate from its packaging (for dual-sided<br />
laminator only).<br />
Place the roll of laminate in the Lower Laminate Cassette (pres<strong>en</strong>t on the dualsided<br />
laminator only). Note the ori<strong>en</strong>tation of the laminate spool with respect to the<br />
laminate cassette as shown in the figure below.<br />
P1036101-001 Zebra <strong>ZXP</strong> <strong>Series</strong> 7 Card Printer User’s <strong>Manual</strong> 23