ZXP Series 7 User's Manual (en) - Hant

More documents

Recommendations

Info

D: Magnetic Card Encoder Card Loading Orientation Note • ONLY USE cards that comply with ISO 7810 and 7811 standards for magnetic stripe cards. The magnetic stripe must be flush to the surface of the card to work properly. Never use cards which have taped-on magnetic stripes. Place the cards in the Feeder Cartridge in the correct orientation as shown (with the magnetic stripe to the left and to the rear). Ensure that the cards are seated properly the hopper. 168 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-001
D: Magnetic Card Encoder Functional Check To check the operation of the mag encoder, you will need the ZXP Toolbox. Select Start > Devices and Printers. Then right-click on the Zebra ZXP Series 7 Card Printer listing, and select Properties > Device Information > ZXP ToolBox. Step 1. From the main Toolbox window, select Technology > Magnetic Encoding. Step 2. Step 3. Step 4. Step 5. Coercivity: Depending on the Card Type used, select either High or Low. For encoding: Click on the checkboxes to select Track 1, Track 2, and/or Track 3; enter the data to be written; if not already done, place a magnetic stripe card in the Feeder Cartridge; and click on the Encode button. When encoding is complete, the card will be ejected into the Output Hopper. Move the card from the Output Hopper to the Feeder Cartridge. Step 6. For reading / validating: Click on the checkboxes to select Track 1, Track 2, and/or Track 3; click on the Read button. Step 7. Step 8. When reading is complete, the card will be ejected into the Output Hopper. The data encoded will be read and displayed. Step 9. Validate the data encoded in step 3. Step 10. This completes the Mag Encoder Functional Check. P1036101-001 Zebra ZXP Series 7 Card Printer User’s Manual 169
Page 1 and 2:
ZEBRA ZXP SERIES 7 User’s Manual
Page 3 and 4:
Contents 1 • Introduction . . . .
Page 5 and 6:
1 Introduction Description This Man
Page 7 and 8:
1: Introduction Icons Icons Through
Page 9 and 10:
2 Installation and Setup General In
Page 11 and 12:
2: Installation and Setup Unpacking
Page 13 and 14:
2: Installation and Setup Unpacking
Page 15 and 16:
2: Installation and Setup Loading C
Page 17 and 18:
Installing the Dual Cleaning Cartri
Page 19 and 20:
Installing the Manual Feed Cleaning
Page 21 and 22:
2: Installation and Setup Loading a
Page 23 and 24:
2: Installation and Setup Loading a
Page 25 and 26:
2: Installation and Setup Loading t
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
2: Installation and Setup Connectin
Page 39 and 40:
2: Installation and Setup Connectin
Page 41 and 42:
2: Installation and Setup Installin
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
3 Operation Introduction Printing w
Page 55 and 56:
3: Operation Manual Card Feed Manua
Page 57 and 58:
3: Operation Operator Control Panel
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
4 Printer Settings and Adjustments
Page 69 and 70:
4: Printer Settings and Adjustments
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
5 ZXP Series Toolbox Introduction I
Page 99 and 100:
5: ZXP Series Toolbox Information I
Page 101 and 102:
5: ZXP Series Toolbox Information M
Page 103 and 104:
5: ZXP Series Toolbox Configuration
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
5: ZXP Series Toolbox Cleaning Clea
Page 113 and 114:
5: ZXP Series Toolbox Technology Te
Page 115 and 116:
5: ZXP Series Toolbox Technology Sm
Page 117 and 118:
5: ZXP Series Toolbox Advanced Secu
Page 119 and 120:
5: ZXP Series Toolbox Advanced Secu
Page 121 and 122: 6 Cleaning Caution • PROTECT YOUR
Page 123 and 124: 6: Cleaning Cleaning the Printer Cl
Page 125 and 126: 6: Cleaning Cleaning the Printer Po
Page 127 and 128: 6: Cleaning Cleaning the Laminator
Page 133 and 134: 6: Cleaning Dual Cleaning Cartridge
Page 135 and 136: 7 Troubleshooting Introduction The
Page 137 and 138: 7: Troubleshooting Introduction COD
Page 143 and 144: 7: Troubleshooting Ethernet Etherne
Page 145 and 146: 8 Technical Specifications Standard
Page 147 and 148: 8: Technical Specifications Specifi
Page 149 and 150: 8: Technical Specifications Specifi
Page 151 and 152: 8: Technical Specifications Agency
Page 153 and 154: 8: Technical Specifications Declara
Page 155 and 156: APPENDIX A Printer Configurations I
Page 157 and 158: Appendix B Connecting to a Network
Page 159 and 160: B: Connecting to a Network Setting
Page 161 and 162: B: Connecting to a Network Step 13.
Page 163 and 164: B: Connecting to a Network Printer
Page 165 and 166: Appendix C Accessing a Network Prin
Page 167 and 168: C: Accessing a Network Printer via
Page 169 and 170: Appendix D Magnetic Card Encoder In
Page 171: D: Magnetic Card Encoder Printing O
Page 175 and 176: D: Magnetic Card Encoder AAMVA The
Page 177 and 178: APPENDIX E Smart Card Options Intro
Page 179 and 180: E: Smart Card Options External Cont
Page 181 and 182: APPENDIX F Worldwide Support For Te
Page 183 and 184: F: Worldwide Support Asia Pacific -
show all

ZXP Series 7 User's Manual (en) - Hant

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?