ZXP Series 7 User's Manual (en) - Hant
ZXP Series 7 User's Manual (en) - Hant
ZXP Series 7 User's Manual (en) - Hant
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7: Troubleshooting<br />
Ethernet<br />
Ethernet<br />
• Indicators -- Detail<br />
Link Speed<br />
Link Activity<br />
• Link Speed Indicator (Orange)<br />
Off No link (disconnected)<br />
1 Blink The LED blinks once (one blink, pause, one blink, etc.) wh<strong>en</strong> a<br />
10Base link has be<strong>en</strong> established.<br />
2 Blinks The LED blinks twice (two blinks, pause, two blinks, etc.) wh<strong>en</strong><br />
a 100Base link has be<strong>en</strong> established.<br />
• Link Activity Indicator (Gre<strong>en</strong>)<br />
Off<br />
On<br />
Blinking<br />
No link (disconnected)<br />
Network link has be<strong>en</strong> established<br />
Network activity has be<strong>en</strong> detected<br />
• Issues<br />
If both LEDs are off, the printer has not detected the pres<strong>en</strong>ce of a network cable. To solve<br />
the problem:<br />
• Verify that the network cable is appropriate and has an RJ-45 connector.<br />
• Remove the network cable from the printer. Plug the network cable back in until you<br />
hear a positive click. Check the other <strong>en</strong>d of the cable in the same manner. If the<br />
printer still does not detect a cable, th<strong>en</strong> continue.<br />
• Connect the printer to a known good network. If the printer is still unable to detect the<br />
network cable, contact Technical Support for assistance.<br />
P1036101-001 Zebra <strong>ZXP</strong> <strong>Series</strong> 7 Card Printer User’s <strong>Manual</strong> 139
Change language