ZXP Series 7 User's Manual (en) - Hant

More documents

Recommendations

Info

7: Troubleshooting OCP Test Cards OCP Test Cards Test Card Images GRADIENT BOXES DENSITY SETUP MONOCHROME ONLY Test Card Descriptions Image Title Description Use GRADIENT BOXES 3 sets of light-to-dark grayscale ramps Used to create color calibration look-up table DENSITY SETUP Mid-gray and maximum density fields on a flat gray surface Used to measure mid and max densities MONOCHROME ONLY Barcode and text Used to verify monochrome print capability 138 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-001
7: Troubleshooting Ethernet Ethernet • Indicators -- Detail Link Speed Link Activity • Link Speed Indicator (Orange) Off No link (disconnected) 1 Blink The LED blinks once (one blink, pause, one blink, etc.) when a 10Base link has been established. 2 Blinks The LED blinks twice (two blinks, pause, two blinks, etc.) when a 100Base link has been established. • Link Activity Indicator (Green) Off On Blinking No link (disconnected) Network link has been established Network activity has been detected • Issues If both LEDs are off, the printer has not detected the presence of a network cable. To solve the problem: • Verify that the network cable is appropriate and has an RJ-45 connector. • Remove the network cable from the printer. Plug the network cable back in until you hear a positive click. Check the other end of the cable in the same manner. If the printer still does not detect a cable, then continue. • Connect the printer to a known good network. If the printer is still unable to detect the network cable, contact Technical Support for assistance. P1036101-001 Zebra ZXP Series 7 Card Printer User’s Manual 139
Page 1 and 2:
ZEBRA ZXP SERIES 7 User’s Manual
Page 3 and 4:
Contents 1 • Introduction . . . .
Page 5 and 6:
1 Introduction Description This Man
Page 7 and 8:
1: Introduction Icons Icons Through
Page 9 and 10:
2 Installation and Setup General In
Page 11 and 12:
2: Installation and Setup Unpacking
Page 13 and 14:
2: Installation and Setup Unpacking
Page 15 and 16:
2: Installation and Setup Loading C
Page 17 and 18:
Installing the Dual Cleaning Cartri
Page 19 and 20:
Installing the Manual Feed Cleaning
Page 21 and 22:
2: Installation and Setup Loading a
Page 23 and 24:
2: Installation and Setup Loading a
Page 25 and 26:
2: Installation and Setup Loading t
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
2: Installation and Setup Connectin
Page 39 and 40:
2: Installation and Setup Connectin
Page 41 and 42:
2: Installation and Setup Installin
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
3 Operation Introduction Printing w
Page 55 and 56:
3: Operation Manual Card Feed Manua
Page 57 and 58:
3: Operation Operator Control Panel
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
4 Printer Settings and Adjustments
Page 69 and 70:
4: Printer Settings and Adjustments
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92: 4: Printer Settings and Adjustments
Page 97 and 98: 5 ZXP Series Toolbox Introduction I
Page 99 and 100: 5: ZXP Series Toolbox Information I
Page 101 and 102: 5: ZXP Series Toolbox Information M
Page 103 and 104: 5: ZXP Series Toolbox Configuration
Page 111 and 112: 5: ZXP Series Toolbox Cleaning Clea
Page 113 and 114: 5: ZXP Series Toolbox Technology Te
Page 115 and 116: 5: ZXP Series Toolbox Technology Sm
Page 117 and 118: 5: ZXP Series Toolbox Advanced Secu
Page 119 and 120: 5: ZXP Series Toolbox Advanced Secu
Page 121 and 122: 6 Cleaning Caution • PROTECT YOUR
Page 123 and 124: 6: Cleaning Cleaning the Printer Cl
Page 125 and 126: 6: Cleaning Cleaning the Printer Po
Page 127 and 128: 6: Cleaning Cleaning the Laminator
Page 133 and 134: 6: Cleaning Dual Cleaning Cartridge
Page 135 and 136: 7 Troubleshooting Introduction The
Page 137 and 138: 7: Troubleshooting Introduction COD
Page 139 and 140: 7: Troubleshooting Introduction COD
Page 141: 7: Troubleshooting Introduction COD
Page 145 and 146: 8 Technical Specifications Standard
Page 147 and 148: 8: Technical Specifications Specifi
Page 149 and 150: 8: Technical Specifications Specifi
Page 151 and 152: 8: Technical Specifications Agency
Page 153 and 154: 8: Technical Specifications Declara
Page 155 and 156: APPENDIX A Printer Configurations I
Page 157 and 158: Appendix B Connecting to a Network
Page 159 and 160: B: Connecting to a Network Setting
Page 161 and 162: B: Connecting to a Network Step 13.
Page 163 and 164: B: Connecting to a Network Printer
Page 165 and 166: Appendix C Accessing a Network Prin
Page 167 and 168: C: Accessing a Network Printer via
Page 169 and 170: Appendix D Magnetic Card Encoder In
Page 171 and 172: D: Magnetic Card Encoder Printing O
Page 173 and 174: D: Magnetic Card Encoder Functional
Page 175 and 176: D: Magnetic Card Encoder AAMVA The
Page 177 and 178: APPENDIX E Smart Card Options Intro
Page 179 and 180: E: Smart Card Options External Cont
Page 181 and 182: APPENDIX F Worldwide Support For Te
Page 183 and 184: F: Worldwide Support Asia Pacific -
show all

ZXP Series 7 User's Manual (en) - Hant

Create successful ePaper yourself

Delete template?

Save as template?