ZXP Series 7 User's Manual (en) - Hant
ZXP Series 7 User's Manual (en) - Hant
ZXP Series 7 User's Manual (en) - Hant
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
6: Cleaning<br />
Cleaning the Laminator<br />
Cleaning the Laminator<br />
NOTE • To order a Laminator Cleaning Kit, go to http://www.zebra.com/supplies.<br />
Wh<strong>en</strong> to Clean<br />
Cleaning requirem<strong>en</strong>ts vary according to the <strong>en</strong>vironm<strong>en</strong>t. For a typical office <strong>en</strong>vironm<strong>en</strong>t,<br />
the recomm<strong>en</strong>ded cleaning cycle is:<br />
• Laminator Card Path cleaning should occur every 5,000 cards.<br />
• Laminator Roller cleaning should occur every 5,000 cards.<br />
• Laminator Ov<strong>en</strong> (Heater Rollers) cleaning should occur every 20,000 cards.<br />
Initiate the cleaning process:<br />
NOTE • To avoid a long wait while the heated rollers cool to 60 o C, perform cleaning before<br />
the rollers heat; i.e., wh<strong>en</strong> first turned on and the rollers are still cold.<br />
Step 1.<br />
Step 2.<br />
Step 3.<br />
Press the MENU button on the Operator Control Panel (OCP). The OCP will<br />
display the Main M<strong>en</strong>u.<br />
Scroll through the Main M<strong>en</strong>u, and select Advanced Settings. The OCP will<br />
display the Advanced Settings M<strong>en</strong>u.<br />
Scroll through the Advanced Settings M<strong>en</strong>u, and select Clean Printer. The OCP<br />
will display the Clean Printer M<strong>en</strong>u.<br />
122 Zebra <strong>ZXP</strong> <strong>Series</strong> 7 Card Printer User’s <strong>Manual</strong> P1036101-001