ZXP Series 7 User's Manual (en) - Hant

More documents

Recommendations

Info

2: Installation and Setup Unpacking the Printer Printer with a Laminator Step 1. Step 2. Step 3. Inspect the shipping container to ensure that no damage has occurred during shipment. If any damage is apparent, file a claim with the shipper. Open the shipping container. Remove the packing material and accessories. Important • Save all the packing material and the shipping carton in case the Printer needs to be moved or shipped. If the original material is lost or damaged, a replacement Shipping Kit can be ordered from Zebra. Step 4. Make sure the following items are included with the Printer: Quick Start Guide CD-ROM with InstallWizard Dual Cleaning Cartridge Single Sided & Dual Sided Dual Sided only Laminate Cassette(s) Feeder Cartridge Output Hopper USB Manual Feed Cleaning Cassette USB Cable Power Cable If any items are missing, please contact your supplier. 8 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-001
2: Installation and Setup Unpacking the Printer Caution • The Printer with Laminator weighs approximately 17.9 kg (39.5 lbs). Use two people to lift it out of the shipping carton. Step 5. Lift the Printer out of the carton by holding it with both hands. Step 6. Place the Printer in a location that meets the following requirements: Important • When moving the printer from storage (23º F/-5º C to 158º F/70º C) to the operating area (59º F/15º C to 95º F/35º C), allow time to acclimate prior to operation. • A reasonably dust-free and dirt-free environment. • Flat surface at least 40 in (1016 mm) x 12 in (305 mm) that can support the weight of the Printer; additional space preferred. Allow a 4-inch clearance, minimum, on all sides. • Vertical clearance at least 32 in (813 mm). • Temperature within the range of 59° to 95°F (15° to 35°C). • Relative humidity 20 to 80% inclusive, non-condensing. • Auto-switching single-phase AC Power, 90V~264V AC, 47-63Hz (50-60Hz nominal); see Electrical specifications on page 145 for power consumption. Step 7. Remove the Printer from the protective plastic bag. P1036101-001 Zebra ZXP Series 7 Card Printer User’s Manual 9
Page 1 and 2: ZEBRA ZXP SERIES 7 User’s Manual
Page 3 and 4: Contents 1 • Introduction . . . .
Page 5 and 6: 1 Introduction Description This Man
Page 7 and 8: 1: Introduction Icons Icons Through
Page 9 and 10: 2 Installation and Setup General In
Page 11: 2: Installation and Setup Unpacking
Page 15 and 16: 2: Installation and Setup Loading C
Page 17 and 18: Installing the Dual Cleaning Cartri
Page 19 and 20: Installing the Manual Feed Cleaning
Page 21 and 22: 2: Installation and Setup Loading a
Page 23 and 24: 2: Installation and Setup Loading a
Page 25 and 26: 2: Installation and Setup Loading t
Page 37 and 38: 2: Installation and Setup Connectin
Page 39 and 40: 2: Installation and Setup Connectin
Page 41 and 42: 2: Installation and Setup Installin
Page 53 and 54: 3 Operation Introduction Printing w
Page 55 and 56: 3: Operation Manual Card Feed Manua
Page 57 and 58: 3: Operation Operator Control Panel
Page 63 and 64:
3: Operation Operator Control Panel
Page 65 and 66:
3: Operation Operator Control Panel
Page 67 and 68:
4 Printer Settings and Adjustments
Page 69 and 70:
4: Printer Settings and Adjustments
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
5 ZXP Series Toolbox Introduction I
Page 99 and 100:
5: ZXP Series Toolbox Information I
Page 101 and 102:
5: ZXP Series Toolbox Information M
Page 103 and 104:
5: ZXP Series Toolbox Configuration
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
5: ZXP Series Toolbox Cleaning Clea
Page 113 and 114:
5: ZXP Series Toolbox Technology Te
Page 115 and 116:
5: ZXP Series Toolbox Technology Sm
Page 117 and 118:
5: ZXP Series Toolbox Advanced Secu
Page 119 and 120:
5: ZXP Series Toolbox Advanced Secu
Page 121 and 122:
6 Cleaning Caution • PROTECT YOUR
Page 123 and 124:
6: Cleaning Cleaning the Printer Cl
Page 125 and 126:
6: Cleaning Cleaning the Printer Po
Page 127 and 128:
6: Cleaning Cleaning the Laminator
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
6: Cleaning Dual Cleaning Cartridge
Page 135 and 136:
7 Troubleshooting Introduction The
Page 137 and 138:
7: Troubleshooting Introduction COD
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
7: Troubleshooting Ethernet Etherne
Page 145 and 146:
8 Technical Specifications Standard
Page 147 and 148:
8: Technical Specifications Specifi
Page 149 and 150:
8: Technical Specifications Specifi
Page 151 and 152:
8: Technical Specifications Agency
Page 153 and 154:
8: Technical Specifications Declara
Page 155 and 156:
APPENDIX A Printer Configurations I
Page 157 and 158:
Appendix B Connecting to a Network
Page 159 and 160:
B: Connecting to a Network Setting
Page 161 and 162:
B: Connecting to a Network Step 13.
Page 163 and 164:
B: Connecting to a Network Printer
Page 165 and 166:
Appendix C Accessing a Network Prin
Page 167 and 168:
C: Accessing a Network Printer via
Page 169 and 170:
Appendix D Magnetic Card Encoder In
Page 171 and 172:
D: Magnetic Card Encoder Printing O
Page 173 and 174:
D: Magnetic Card Encoder Functional
Page 175 and 176:
D: Magnetic Card Encoder AAMVA The
Page 177 and 178:
APPENDIX E Smart Card Options Intro
Page 179 and 180:
E: Smart Card Options External Cont
Page 181 and 182:
APPENDIX F Worldwide Support For Te
Page 183 and 184:
F: Worldwide Support Asia Pacific -
show all

ZXP Series 7 User's Manual (en) - Hant

Create successful ePaper yourself

Delete template?

Save as template?