ZXP Series 7 User's Manual (en) - Hant

5: ZXP Series Toolbox
Advanced Security
• Toolbox Password (continued)
- To change the password:
1. Enter your password in the Old password field.
2. Enter the new password in the New password and the Confirm password fields.
3. Click the Apply button.
- To deactivate password protection:
1. Enter your password in the Old password field.
2. Leave the New password and the Confirm password fields blank.
3. Click the Apply button.
• Last Print Job Options
- The Erase job data after transmission option erases the job data after it has been
transmitted to the printer.
- The Enable PRINT soft key in OCP option allows the last print job to remain in
memory for multiple reprints via the OCP.
The Save button saves the selection.
• Error Messages
Select the checkbox to suppress error message display from the driver.
• Passkey
The Enable Passkey button provides access to advanced security settings; i.e., Host
Authentication, Data Encryption, and Printer Lock Key.
114 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-001