CIMD Interface Specification - Telenor

7 CIMD parameters
7.1 Parameter types
dn03305755
Issue 5-0 en
The parameter type selects the allowed values of characters in the CIMD2
messages.
Integer (int)
Integer is the most common type of parameter. The allowed values are the ASCII
representation of the digits 0 to 9. This means that only decimal values from 48 to
57 are allowed.
Example Integer
064:3050:167030:0055:1056:63
Address (addr)
The Address parameter type is used for passing GSM addresses to and from the
SMS Center. This field can contain digits like the integer field, but also some
extra characters. What characters are actually accepted depends on the
configuration of the address conversion done in the SMS Center. The ASCII
representation of '+' is currently allowed. This means that besides the values 48 to
57 (digits 0 to 9) also value 43 ('+') is allowed.
Example Address
021:+35812345678023:13131
Hexadecimal (hex)
CIMD parameters
The Hexadecimal parameter type is used for passing binary data to and from the
SMS Center. This field can contain the ASCII representation of the digits 0 to 9
and the ASCII representation of the characters 'A' to 'F' and 'a' to 'f'. This means
that the following decimal values are allowed: 48 to 57 (0 to 9); 65 to 70 ('A' to
'F') and 97 to 102 ('a' to 'f') in the CIMD2 parameters of this type.
# Nokia Corporation 47 (77)