warp service manual - ADB Lighting Technologies

More documents

Recommendations

Info

Maintenance Sheet 5.14.2 Shutter wheel Required Tool(s) Spare Part Code Time Needed Flat Screw Driver 1001.60.830 5 min 1. Unplug the WARP 2. Insert the flat screwdriver between the wheels and remove the blade handle 3. Replace the blade handle 1001.60.830 includes: • 9 Blade handle Insert the flat screwdriver here Service Manual - page 28 Issue 1.0 www.adblighting.com
Maintenance Sheet 5.15 How to adjust Brake on Lens Wheel Required Tool(s) Spare Part Code Time Needed Flat Screw Driver Metric Wrench 7 1001.60.220 5 min 1. Put the WARP Downwards 2. Release lock nut A (use 8 Metric Wrench) 3. Adjust the friction with screw B (use screw driver) Don’t block the ball inside the screw Good adjustment: the wheel could <strong>manual</strong>ly turn the lens can’t fall when WARP Downwards 4. Tighten the lock nut A 1001.60.220 includes: • 2 Pression Screws • 2 Nuts Notice: If the ball is out of the screw, you must change the complete screw B A B www.adblighting.com Service Manual - page 29 Issue 1.0
Page 1: WARP Zoom Profile Spotlights Servic
Page 4 and 5: Index 1 Index Foreword ............
Page 6 and 7: Tools 3 Tools Adequate tools are re
Page 8 and 9: Spare Parts 4.2 Spare Parts for the
Page 10 and 11: Spare Parts Spare part code for WAR
Page 12 and 13: Maintenance Sheet Required Tool(s)
Page 14 and 15: Maintenance Sheet 5.3 Replace the R
Page 16 and 17: Maintenance Sheet 5.4.2 How replace
Page 18 and 19: Maintenance Sheet 5.4.3 How replace
Page 20 and 21: Maintenance Sheet 5.5 Replace the B
Page 22 and 23: Maintenance Sheet 5.7 Replace the B
Page 24 and 25: Maintenance Sheet 5.9 Change Gears
Page 26 and 27: Maintenance Sheet 5.11 Remove / Cha
Page 28 and 29: Maintenance Sheet 5.13 Replace Diap
Page 32: Maintenance Sheet Notes Service Man

warp service manual - ADB Lighting Technologies

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?