HD3000 - Janome

More documents

Recommendations

Info

Blind Stitch Hemming Machine Setting On lightweight fabrics the raw edge can be turned under and pressed. On heavy weight fabrics that ravel, the raw edge should be overcast first. Fold up the hem the desired amount and pin in place. Then fold the hem under the fabric as illustrated. Position the fabric on the machine so that the needle just pierces the folded part of the fabric when the needle comes over to the extreme left side. Lower the presser foot. Turn the guide screw and move the sliding guide next to the folded edge. Sew guiding the folded edge along the sliding guide. 40
SECTION V DECORATIVE STITCHING Decorative Satin Stitch Patterns Stretch Stitch Patterns Machine Setting Machine Setting Sew a row of stitches and adjust the thread tension so the needle thread should appear on the reverse side of the fabric. Test the stitch on the actual fabric for the best results. Stitch length of the automatic patterns (No.14 to 18) are preset, so you do not need to select the stitch length for these patterns. 41
Page 1: INSTRUCTION BOOK
Page 4 and 5: Do’s and Don’ts 1. Always be aw
Page 6 and 7: SECTION I ESSENTIAL PARTS Names of
Page 8 and 9: Foot Storage Compartment q w e r Ea
Page 10 and 11: SECTION II GETTING READY TO SEW Con
Page 12 and 13: Pressure Dial Dropping the Feed Dog
Page 14 and 15: To Detach and Attach the Foot Holde
Page 16 and 17: Thread and Needle Chart Fabrics Thr
Page 18 and 19: Threading the Bobbin Winder e r w t
Page 20 and 21: Threading the Machine e r t q w q w
Page 22 and 23: Drawing Up Bobbin Thread q Raise th
Page 24 and 25: Pattern Selector Dial Zigzag Width
Page 26 and 27: Changing the Sewing Directions Stra
Page 28 and 29: Overedge Stitch Tricot Stitch Machi
Page 30 and 31: Sewing Buttons Machine Setting Tape
Page 32 and 33: Touch Starting point r t Bottonhole
Page 34 and 35: Manual Buttonhole Machine Setting q
Page 36 and 37: Corded Buttonhole Machine Setting q
Page 38 and 39: To Sew: Fold back the left seam all
Page 40 and 41: Rolled Hem Machine Setting Make a d
Page 44 and 45: Adjusting Stretch Stitch Balance Sm
Page 46 and 47: Pin Tucking Machine Setting Positio
Page 48 and 49: Applique Patch Work Machine Setting
Page 50 and 51: Cleaning the Hook Race Inserting th
Page 52: Condition Cause Reference Seam Puck

HD3000 - Janome

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?