HD3000 - Janome

Blind Stitch Hemming
Machine Setting
On lightweight fabrics the raw edge can be turned under and pressed.
On heavy weight fabrics that ravel, the raw edge should be overcast first.
Fold up the hem the desired amount and pin in place.
Then fold the hem under the fabric as illustrated.
Position the fabric on the machine
so that the needle just pierces the
folded part of the fabric when the
needle comes over to the extreme
left side.
Lower the presser foot.
Turn the guide screw and move
the sliding guide next to the folded
edge. Sew guiding the folded
edge along the sliding guide.
40