HD3000 - Janome

Corded Buttonhole
Machine Setting
q we r t y u i
Set the stitch width in
accordance with the thickness of
the cord used.
To cut the opening and to reset
for sewing the next buttonhole,
refer to the instructions on page
30.
q With the buttonhole foot raised, hook the filler cord on the cord spur at the back of the buttonhole foot.
w Bring the ends toward you under the buttonhole foot until they clear the front end.
e Hook the filler cord info the forks on the front of the R foot to hold them tight.
r Lower the needle into the garment where the buttonhole will start and lower the foot.
t Depress the foot control gently and sew the buttonhole.
Each side of the buttonhole and the bartacks will be sewn over the cord.
y Remove the fabric from the machine and cut the sewing threads.
u Pull the left end of the filler cord to tighten it.
i Thread the end through a darning needle, draw to the bottom side of the fabric and cut.
34