HD3000 - Janome

Sewing Buttons
Machine Setting
Tape the button over the placement mark.
A pin can be placed on top of the foot to
from a shank. Before lowering the foot, test
the needle swing making sure the needle
drops in each hole.
Adjust the stitch width if necessary. Lower
the foot.
Align the both holes of button
with the needle swing, lower
the foot and depress the foot
control.
To strengthen the shank, cut the threads leaving a 20 cm (8˝) tail.
Bring the needle thread down through the hole in the button and
wind it around the shank.
Draw the thread to the wrong side of fabric and knot.
When button sewing is finished, return the drop feed lever.
28