CORRIGENDUM No. 2 - Yap State Government
CORRIGENDUM No. 2 - Yap State Government
CORRIGENDUM No. 2 - Yap State Government
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
(bb). Clarification Request #28:<br />
Solar Batteries;<br />
NEC requires each equipment to have disconnect switch, is this required for this project<br />
Response:<br />
All NEC guidelines must be followed. All main components shall be able to be disconnected by a breaker<br />
and/or disconnect switch<br />
(cc). Clarification Request #29:<br />
Solar Batteries;<br />
Any preference on Battery Casing – transparent, clear etc<br />
Response:<br />
<strong>No</strong> preference is given to the color of the battery casing, but note that the acid level must be visible from<br />
outside.<br />
(dd). Clarification Request #30:<br />
Battery Enclosures;<br />
Will the Batteries be installed indoors or outdoors<br />
Response:<br />
Outdoors<br />
(ee). Clarification Request #31:<br />
Battery Enclosures;<br />
Any specific requirement for Battery Enclosure Material<br />
Response:<br />
The battery enclosure must have a long lifetime and must be suitable for outdoor marine environment<br />
usage.<br />
(ff). Clarification Request #32:<br />
Battery Enclosures;<br />
Do you intend to attach the Enclosure to the wall or floor or it will be just sitting on the ground etc<br />
Response:<br />
On the ground<br />
(gg). Clarification Request #33:<br />
Charge Controllers (SHS & SCS);<br />
Will MPPT Charge Controllers be considered for this project, MPPT Charge controllers are more efficient<br />
but there is cost difference as well<br />
Response:<br />
Yes<br />
(hh). Clarification Request #34:<br />
Charge Controllers (SHS & SCS);<br />
Is Battery Temperature Sensor required for temperature compensation charging, this will be of great help<br />
due to temperature variance<br />
Response:<br />
Refer to the requirements in the technical specifications for charge controllers. For the SCS a battery sensor<br />
would be required