Holland 51000 Landing Gear Series

51000
LANDING GEAR
THE INDUSTRY STANDARD.
STRONG, LIGHTWEIGHT AND
DURABLE.
www.thehollandgroupinc.com

Standard Features
The Holland 51000
The standard for an industry.
There is no other landing gear quite like this one. It’s a strong, proven
performer that combines lightweight fuel efficiency with the toughness to
handle the big loads. The 51000. It’s rolling strong, right now, on over a
million rigs worldwide.
Cut weight. Boost payload. Roll on.
• Holland’s exclusive computer-controlled stress analysis system
enables precise control of wall shape, gauge and yield
Reliable, high-quality seal keeps water out
and extends life.
Gearbox with low-temperature premium lube
rated for service from –65°F to 225°F.
Industry-standard TTMA mounting plate.
• Greater weight reduction while maintaining structural integrity
• Improved fuel economy due to reduced weight
• The 17-inch travel, skid-foot model weighs only 172 lbs.
Ingenious design. Easy operation. Just
what you’d expect from Holland.
• Three-gear train gearbox handles normal loads with 40% less effort
• 80,000 psi minimum yield upper housing and retract tube maximizes
strength while saving weight
• Positive gear shifting; easy shift option is available
• Exceeds all AAR M-931 and all TTMA RP-4 performance
specifications
• High-strength ductile iron gears
• Extremely easy to lift
Rugged durability. Built to handle the road.
• Patented* twin bulkhead floating nut reduces damage from dock-walk
and dramatically boosts side-load capacity
Backed by a level of service you can only
get from Holland.
• Parts available on time, virtually anywhere
• Extensive and responsive network of distributors and warehouses
• Nationwide sales and service teams means quick, dependable service
• Comprehensive five-year warranty
Models for any application and every need.
Holland offers a landing gear to meet your requirements, whatever they
may be:
• Speed to the ground
• Heavy-duty capacity
• Lightweight
Exclusive floating nut design for high side-load
capacity and reduced dock-walk damage.
• Specially formulated grease
provides easy cranking and
reduces component wear;
protection from –65°F to 225°F
• Premium all-around performance
(static load capacity of 140,000
lbs., lift capacity of 50,000 lbs.,
side-load capacity of 27,000 lbs.)
80,000 psi minimum yield upper housing and
retract tube.
Removable cushion foot option eliminates the
need to replace the entire leg when just the
foot is damaged.
Landing Gear Capabilities
Lifting Capacity – Rated
100 ft. lbs. Input Torque 50,000 lbs.
Ultimate Load Capacity 140,000 lbs.
Side Load Capacity 27,000 lbs.
Gear Ratio vs. Turns Per Inch
Low Gear 34.4
High Gear 4.5
All tests in accordance with AAR and TTMA recommended practice
*Patent No. 6099016

51000
LANDING GEAR
Option
Shaft seals are added
to all driveshaft and
crankshaft bushings to
prevent water, dirt, and
other contamination.
A grease tube completely
surrounds the elevating screw
so that when the legs are raised
or lowered, the screw receives a
new coating of grease.
Holland Landing Gear
Technology.
When you look closely at Holland landing gear, you
discover a tradition of innovative technology based on
continuing input from customers. A process that has
helped create many unique, patented products that
have helped customers save time, weight, fuel, and
effort. And, even reduced worker’s compensation
claims.
The NoLube , low maintenance technology — now
available on all Holland landing gear models — is the
latest example of that tradition and process, providing
a sealed system resulting in maximum component
lubrication with no need for additional grease.
You can expect Holland NoLube technology to
significantly lower your cost of ownership by reducing
maintenance time and costs. Which, in turn, also
keeps your trailers on the road earning money.
Exclusive Holland
Options:
• A sealed system that provides maximum lubrication
with no need for additional grease
• Seals are added to all driveshaft and crankshaft
bushings
• Grease tube completely surrounds the elevating
screw
Ask your sales representative for this exclusive option.

ORDERING INFORMATION
EXAMPLE: LG400B-700000000
LANDING GEAR
MOUNTING ISHAFTS FOOTWARE TRAVEL LEG ASSY
RETRACT TUBE
GREASE
LOG NUMBER /ACCESSORY NO.
NO. MODEL NO. DESCRIPTION NO. DESCRIPTION NO. DESCRIPTION NO. DESCRIPTION NO. DESCRIPTION
LG4 MODEL 51,000 0 UNIV. MT. 21/32" 0 UNIVERSAL
0 NO FOOTWARE 3 13 1/2" 0
SETS
NO. DESCRIPTION
0 STD.
NO.
0
DESCRIPTION
STD. PACK
CONTACT HOLLAND BINKLEY
FOR SPECIAL OPTIONS AND
ACCESSORIES
1
CONV. MT. 21/32"
1
REVERSE
1
SANDSHOE
4 1/2"X10"X10" STD.
5
15 1/2"
1
LEFT HAND
5
RCF MRL
3
FULL PACK IN GB&HD
4
I-BEAM MT. 21/32"
2
I-BEAM
2
SANDSHOE
4 1/2"X10"X12'
7
17"
2
RIGHT HAND
9 SPECIAL
7
STD. PACK & PERMALUBE
8
REVERSE MT. 21/32"
9
CONVENTIONAL
3
SANDSHOE
2"X10"X10"
9
19"
9
SPECIAL
9
SPECIAL
A
I-BEAM-10"
4
SANDSHOE
2"X10"X12"
Q
NOLUBE (PERMANENTLY
LUBRICATED)
A
UNIV. MT. 17/32"
J
UNIVERSAL E-Z SHIFT
5
12" DIA. SHOCKFOOT
R
NOLUBE PER BLOCK "Q" &
ENHANCED SCREW LUBE
B
CONV. MT. 17/32"
K
CONV. E-Z SHIFT
8
10" DIA. SHOCKFOOT
2
S
10 YEAR WARRANTY PER
BLOCK "Q" & LGO128
SHOCKFOOT OR RCF REQUIRED
H
I-BEAM MT. 17/32"
L
REVERSE E-Z SHIFT
A
R.C.F. NO FOOTWARE
T
10 YEAR WARRANTY PER
BLOCK "S"- ENHANCED
LUBRICATION ON SCREW
L
REVERSE MT. 17/32"
M
I-BEAM E-Z SHIFT
B
10" X 10" R.C.F.
C
10" DIA. R.C.F.
D
12" DIA. R.C.F.
MOUNTING
M
DISTANCES
M
R
SANDSHOE HD
4 1/2"X 12" X 12"
12"X12" R.C.F.
LANDING GEAR DIMENSIONS
TYPE OF MOUNTING
REVERSE MOUNTED
MAXIMUM
MIN. (LG0083-01)
MIN. (LG0083-03)
96" WIDE
TRAILER
84.00
78.00
66.75
102" WIDE
TRAILER
90.00
84.00
72.75
1
DESCRIPTION
13.5" TRAVEL
15.5" TRAVEL
17" TRAVEL
19" TRAVEL
A (10x10x4-1/2
or 10x12x4-1/2
Sandshoe)
28.688
29.688
31.188
33.688
A (10x10x2
or 10x12x2
Sandshoe)
26.188
27.188
28.688
31.188
A
(Shockfoot)
29.000
----
31.750
31.750
A
(R.C.F. M.R.L.)
27.250
28.250
29.750
----
A
(Standard
R.C.F.)
----
----
31.750
32.375
Crank Part
Number
LG0083-01
LG0083-03
LG0083-05
B
5.250
10.875
16.875
MIN. (LG0083-05)
54.75
60.75
ALL DIMENSIONS SHOWN IN INCHES
CONVENTIONAL MOUNTED
MAXIMUM
MIN. (LG0083-01)
MIN. (LG0083-03)
MIN. (LG0083-05)
67.50
61.50
50.25
38.25
73.50
67.50
56.25
44.25
MOUNTING DISTANCE – REVERSE
SEE CHART
8.438
10.375
6.000 HIGH GEAR
5.000 LOW GEAR
4.062
3.312
9.000
7.500
3.031
A
6.312
1.000 DIA.
4.375 .250
4.625
.688
.250
2.250 TYP.
3.188
R. 3.105
MOUNTING DISTANCE – CONVENTIONAL
SEE CHART
2.438 4.500 4.500
2.438
13.250 HIGH GEAR
14.250 LOW GEAR
3.062
4.375 SQ.
3.875
A
3.105
3.188
.625
.250
1.438
1.812
B
14.000
A
1.688
1.562
TRAVEL
4.000 SQ.
RECOMMENDED
LOCATION
M
HOLLAND USA, INC.
HOLLAND HITCH OF CANADA, LTD.
1950 Industrial Blvd., P.O. Box 425 Woodstock, Ontario, Canada
Muskegon, MI 49443-0425 Phone 519-537-3494
Phone 888-396-6501 • Fax 800-356-6501 Fax 800-565-7753
HOLLAND INTERNATIONAL, INC.
Surrey, British Columbia, Canada
467 Ottawa Avenue, P.O. Box 2099 Phone 604-574-7491
Holland, MI 494222-2099
GO THE DISTANCE.
Fax 604-574-0244
Phone 616-396-6501 • Fax 616-396-1511
Copyright © March 2006 • The Holland Group, Inc.
XL-LG318-02
www.thehollandgroupinc.com