SDU-xcite Smart Display Unit Installation Instructions - Trend Controls
SDU-xcite Smart Display Unit Installation Instructions - Trend Controls SDU-xcite Smart Display Unit Installation Instructions - Trend Controls
5 2 - / SDU-xcite Installation Instructions 3 Installation (Continued) 2 Requirements a b c -10 °C +114 °F +40 °C +104 °F 0 0 %RH 90 %RH 3 Remove Front Cover c a b 4 Check SDU type 6 Configure SDU to change operating mode, restrictive set, or language a Connect Input Power SDU + +24 Vdc 0 Vdc 24 Vdc Power Supply 24 Vdc 10 mA Check SDU-XCITE 5 Route Cable + SDU + +24 Vac (L) +24 Vac (N) 24 Vac Power Supply 24 Vac 10 mA * If one side of the 24 Vac input power is connected to 0 V, that side must be connected to the SDU - (negative) terminal * b Switch on Power SDU 24 V 1 ! " 2 SDU-xcite Installation Instructions TG200643 Issue 1/E 20/11/06
5 2 - / 1 2 3 4 SP ENG Installation Instructions - Sheet n SDU-xcite 3 Installation (Continued) 6 Configure SDU (Continued) c Connect to PC SET, SDU-Tool SDU DOWNLOAD ADAPTOR (EJ105174) Cable/EJ101442 SDU-xcite RJ11 RJ11 + 9 way D type Female RJ11 Socket 24 V Power Supply CAUTION: The SDU-xcite must be connected to the PC using adapter cable, SDU DOWNLOAD ADAPTOR. Failure to use this cable may result in damage to the SDU or PC. d Set up SDU Configuration File Set up: SET, SDU-Tool Mode Backup File to Disk Home Page Alarm log Restrictive mode list Language Note set to Mode 0 or 1 to enable alarm log for IQ3 >=V1.2 Unrestricted/Restricted/Display & Directory Show/Don’t Show Skip (IQ3 will return ‘None’ if included) Select required modules Translation of standard text e Set SDU into Download Mode Config Update f Download Language SET, SDU-Tool Set Language Download to SDU ! " 5 2 - / SDU Data Sheet TA200559 SDU Tool Manual TE200600 g Download Completed h Switch off Power SDU ! " O I 24 V Config Update Download Complete SDU-xcite Installation Instructions TG200643 Issue 1/E 20/11/06 3
- Page 1: Installation Instructions SDU-xcite
- Page 5 and 6: Installation Instructions - Sheet n
- Page 7 and 8: Installation Instructions - Sheet n
5 2 - /<br />
<strong>SDU</strong>-<strong>xcite</strong><br />
<strong>Installation</strong> <strong>Instructions</strong><br />
3 <strong>Installation</strong> (Continued)<br />
2<br />
Requirements<br />
a<br />
b<br />
c<br />
-10 °C<br />
+114 °F<br />
+40 °C<br />
+104 °F<br />
0 <br />
0 %RH 90 %RH<br />
3<br />
Remove Front Cover<br />
c<br />
a<br />
b<br />
4<br />
Check <strong>SDU</strong> type<br />
6<br />
Configure <strong>SDU</strong><br />
to change operating mode, restrictive set, or<br />
language<br />
a<br />
Connect Input Power<br />
<strong>SDU</strong><br />
+<br />
+24 Vdc<br />
0 Vdc<br />
24 Vdc Power<br />
Supply<br />
24 Vdc<br />
10 mA<br />
Check <strong>SDU</strong>-XCITE<br />
5<br />
Route Cable<br />
+<br />
<strong>SDU</strong><br />
+<br />
+24 Vac (L)<br />
+24 Vac (N)<br />
24 Vac Power<br />
Supply<br />
24 Vac<br />
10 mA<br />
* If one side of the 24 Vac input power is connected to 0<br />
V, that side must be connected to the <strong>SDU</strong> - (negative)<br />
terminal<br />
*<br />
b<br />
Switch on Power<br />
<strong>SDU</strong><br />
<br />
24 V<br />
1<br />
! "<br />
2<br />
<strong>SDU</strong>-<strong>xcite</strong> <strong>Installation</strong> <strong>Instructions</strong> TG200643 Issue 1/E 20/11/06