Untitled

› Mae 75
› GT-LAB
Software for calculating CONDUCTANCE and TRANSMITTANCE.
The GT Lab program enables conductance and transmittance calculations
by importing data measured with a thermal flux-meter.
CONDUCTANCE
The conductance calculation is carried out with the progressive averages
method. By this method, the conductance is obtained not by using
instantaneous values for temperature and thermal flow, but by taking
account of the values calculated on averages obtained from the total
of the readings performed.
TRANSMITTANCE
The transmittance calculation is carried out by selecting the surface
coefficients of heat exchange, which combine the effects of the above
phenomena and are tabulated in UNI 7357/76 Regulations and subsequent
adaptations according to the geometrical situation (e.g. vertical,
horizontal structure, etc.), and in the UNI regulations accompanying
Law 10/91 (e.g. in the UNI 10345 regulations for window elements).
mae-srl.it/go/gtlab
› PC-LAB
Software dedicated to display and storage of data acquired during load
tests on floors or other load-bearing elements carried out with M.A.E.
instrumentation.
The test consists of producing, on a longitudinal line of the floor, one or
more concentrated forces. The forces are calculated so as to produce
the same maximum state of stress laid down in the design for applying
the distributed load.
When receipt of data starts, the software records the measurements on
entry, displays them and creates the graphics in real time.
The load value can be read automatically or entered manually.
The reading of the data may be continuous in real time or at manual intervals
with recording of the data decided on by the user.
Data and Graphics displayed in real time.
Possibility of analysing the graphic for one or more channels simultaneously.
Report creation with tables of measurements read and graphics generated.
Accepts LAN and USB connections.
mae-srl.it/go/pclab