Untitled

› Mae 69
TERMALOG
SUPPORTED INVESTIGATION
Measure of conduttance
Termalog is a compact and affordable thermo-flowmeter
to measure heat transmission
on site. The unit is equipped with USB
interface, which allows to easily program
the measurement set-ups through a PC
or notebook (not supplied) onto which
the relative management software Termalog
Manager is installed, which also allows
to download the data acquired. The
compact sizes, the extensive operative
autonomy, ensured by the integrated, rechargeable
battery pack and the extreme
simplicity of use, render Termalog the ideal
solution to easily and quickly measure
and calculate heat transmission values in
any application.
With the use of four probes to measure
contact temperature and a bidirectional
flow plate, the instrument measures the
on-site heat transmission values of the
opaque walls of entire buildings as set
forth by recent laws on energy saving.
Termalog flowmeter is suitable to measure
environmental parameters on site
and in the laboratory. The data acquired
is downloaded on PC and elaborated with
GT LAB software (supplied) for the direct
calculation of coefficient K (heat transmission)
and of the parameters linked to
thermal insulation, through the progressive
average method.
The instrument complies with ISO 9869
standard.
Fields of use:
Acquisition of environmental parameters
on existing buildings (prior to restructuring
activities) in order to determine the
actual insulation need which falls within
the parameters set forth by law, and on
new buildings (after restructuring activities)
to evaluate the quality of the work
performed.
SPECIFICATIONS
Acquisition:
• Resolution: 10 bit
• Number of channels: 5
• Sampling: 0.5Hz
• Maximum range of inlet signal (without influence):
0-2.5V
• Signals influence: with internal modules
Recording:
• Recording intervals: from 2 minutes to 24
hours
• Measures stored: 770 (circular file)
• Watch: integrated with buffer battery
• Recording support: internal flash memory
• Data format: TSV
• Measurement type: absolute
• Interfaces: USB
Thermometers:
• Number: 4
• Temperature range: -40 - +110°C
• Precision: ±0.2°C
Thermo-flow plate:
• Sensitivity: 50μV/Wm2 (typical)
• Temperature range: -30 - +70°C
• Diameter: 80mm
• Thickness: 5mm
• Measured flow: bidirectional
General data:
• Measures display: numeric and graphic (on
PC)
• Power supply: internal batteries AA type rechargeable
(4.8V – 2.5Ah)
• Typical consumption: 20mA
• Average autonomy: 30 days
• Operating temperature: 0-60°C
• Sizes and weight: L190 mm x P110 mm x
H60 mm, 0.6Kg
mae-srl.it/go/termalog