Untitled

› Monitoring
68
A5000MAW
SUPPORTED INVESTIGATION
Measure of conduttance
A5000MAW thermo-flow meter for heat
transmission measurements on site
stands out for utmost accuracy in data
acquisition (24-bit resolution) combined
to the great versatility and simplicity of
use. Through the use of four probes to
measure contact temperature and a flow
plate connected wirelessly to A5000MAW
central unit (connection through remote,
totally independent data acquisition and
transmission unit), the instrument takes
the measurement of the heat transmission
values on site of the opaque walls of
entire buildings, as requested by recent
laws on energy efficiency. The data acquisition
device is equipped with graphic
display for the real time visualization
of the trend of the data acquired, keyboard
with charge-transfer technology
and removable S.D. memory for storing
and following elaboration of the measurements
acquired. The recording methods
can be set using the software in an
easy and quick manner, to carry out surveys
with utmost accuracy and simplicity.
A5000MAW thermo-flow meter is envisaged
to carry out medium and long-term
surveys and is suitable to measure environmental
parameters on site and in the
laboratory. The unit can also manage up
to two optional couples of remote transmitting
units MW-1; MW-2 so as to record
the heat transmission parameters in 3
different measurement areas of a building,
at the same time. The data acquired
is downloaded on PC and elaborated with
(GT LAB) software for the direct calculation
of coefficient K (heat transmission)
and of the parameters linked to the thermal
insulation of the building, through
the progressive average method. The instrument
complies with ISO 9869 standard.
Fields of use: Acquisition of environmental
parameters on existing buildings (prior
to restructuring activities) in order to determine
the actual insulation need which
falls within the parameters set forth by
law, and on new buildings (after restructuring
activities) to evaluate the quality
of the work performed.
SPECIFICATIONS
Recording:
• Recording intervals: from 10 seconds to 12
hours
• Watch: integrated with buffer battery
• Recording support: removable SD memory
up to 2 GB
• Data format: TSV, BMP
• Measurement type: relative or absolute
Thermometers:
• Total number: 4
• Temperature range: -40 - +110°C,
• Precision: ±0.2°C
Thermo-flow plate:
• Sensitivity: 50μV/Wm2 (typical)
• Temperature range: -30 - +70°C
• Diameter: 80mm
• Thickness: 5mm
• Measured flow: bidirectional
Radio:
• Frequency: 2.4GHz
• Transmission power: 0dBm (14dBm upon
request)
• Receiver’s sensibility: –96dBm
• Protocol: IEEE802.15.4
• Exposed capacity: 300m (1000m with power
14dBm)
• Capacity in buildings: 40m
WLS-1 modules for connecting to sensors:
• Transmission power: 0dBm (14dBm upon
request)
• Converters’ resolution: 24 bit
• Maximum distortion: 0.0005%
• Maximum sampling: 0.5Hz
• Maximum range of inlet signal: 0-2.5V
• Channels: 2 for MW-2, 3 for MW-3
• Power supply: independent, with batteries
AA type rechargeable and replaceable
(7.2V – 2.5Ah)
• Operative autonomy: 10 days
General data:
• Keyboard: 24 charge-transfer buttons
• Display: mono-chromatic graphic LCD 320 x
240 pixel
• Measures display: numeric and graphic
• Instrument’s power supply: batteries AA
type rechargeable and replaceable (12V –
2.5Ah). Envisaged for external power supply
• Typical consumption: 40mA monitor off -
90mA monitor on
• Container: anti-crash, in copolymers of polypropylene
• Operating temperature: 0-60°C
• Sizes and weight: L. 270 x H. 120 x P. 246
mm, 3 Kg
mae-srl.it/go/A5000MAW