3000 SERIES DOOR FURNITURE - merchandise.com.hk

3000 Series
Artefact Door Furniture
Design Your Own Furniture
Plate
This series allows the ‘designer’ to sculpt your plate to match the decor, fittings or overall design
of the project. The lever selection to the bottom of this page can be used on this series, with all
the functions suitable for the UNION 2D2 mortice lock.
Engraving
In addition to having your own unique plate, UNION also offer corporate engraving to
‘personalise’ the furniture to the clients requirements. Whether it is a hotel chain, large
corporation or even an architects own practice name, UNION can ‘personalise’ the door furniture
to the customers requirements.
For more details on this service, please contact your local UNION sales office.
190mm MAX.
Example plate shape
440mm
• Plate sizes - Maximum 440mm x 190mm
Minimum 162mm x 50mm
• Material of plate - 2mm stainless steel
• Finish of plates - brushed, polished or
powder coated
• Plate shape, handle position and feature
position e.g. Cylinder, turnknob etc. to be
approved by UNION Engineering and
Manufacturing.
• If Engraving is required a 10mm offset
boundary from the external profile is
required.
• UNION will not take any responsibility or
liability for any Design Registration
infringement.
• Plate profile to be supplied in DXF or IGES
format.
50mm MIN.
61
68
62
69
63
70
162mm MIN
64
71
65
72
R3mm
Min.
R60mm
Min.
Plate to be used
with UNION
2D2 Series
mortice lock only
66
67
73
74
3mm Min.
External Radius
60mm Min.
Internal Radius
No Sharp Points
or Corners
75