maintenance - Polaris
maintenance - Polaris
maintenance - Polaris
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MAINTENANCE<br />
Lights<br />
Brake Lights<br />
When the brake pedal is depressed, the console brake light comes on.<br />
Check the brake light before each ride.<br />
1. Turn the ignition switch to the ON position.<br />
2. Depress the brake pedal. The brake light should come on after about<br />
10mm (0.4 in.) of pedal travel. If the light doesn't come on, check<br />
the bulb.<br />
Indicator Lamp Replacement<br />
1. Lift the hood.<br />
2. Reach in behind the console<br />
Release<br />
Tab<br />
panel and lift the release to<br />
unplug the light from the<br />
harness.<br />
3. Using a flathead screwdriver,<br />
press on the tab on the top of<br />
the light to remove the indicator<br />
light assembly from the<br />
console panel.<br />
4. Locate the expired lamp. Using a screwdriver, rotate the lamp 1/4<br />
turn counter-clockwise.<br />
5. Grip the lamp with a needle-nose pliers and remove it from the<br />
assembly.<br />
6. Install the new lamp. Using a screwdriver, rotate the lamp 1/4 turn<br />
clockwise to seat it.<br />
7. Snap the assembly back into the console panel. Reconnect the harness.<br />
8. Close the hood.<br />
85