T2 Brochure - Stryker

T2
IM Nailing System

Introduction
Kiel Plant History
100 years ago, on December 5, 1904,
when Ernst Pohl founded the company
that was eventually to become Stryker
Trauma GmbH, nobody could
have imagined the extraordinary
developments that would result from
the collaboration between Dr. Ernst
Pohl and Prof. Gerhard Küntscher.
The Küntscher and Pohl team
established the technical and clinical
principles on which the closed
technique of intramedullary nailing
of long tubular bones is based. When
this was first introduced in 1939,
intramedullary nailing was regarded
as a revolutionary method that
challenged the proven and established
procedures of the time. Prominent
opinion leaders in trauma surgery
were scathingly critical. From the
beginning, however, support came
from Prof. Fischer, the Director of
Surgery at Kiel University Hospital,
who was convinced “that Mr.
Küntscher‘s procedures represent a
great advancement” and history has
proved him right.
In the intervening years the technique
of intramedullary nailing has been
developed and refined many times
over. Today it is the method of choice
used by trauma and orthopaedic
surgeons throughout the world
for treating a wide range of long
bone fractures. Whilst many other
manufacturers have subsequently
produced locking nails based on the
principles established by Küntscher
the birthplace of the technique is and
remains Kiel, the place from which
the Küntscher nail began its spread
around the globe. From this place,
many innovative, pioneering products
have been introduced worldwide and
many more will surely follow.
Staff in front of the barracks in the Hospitalstraße 5−7, Kiel (1953)
Main entrance Stryker Trauma GmbH (2009)
2
Stryker Osteosynthesis is steeped in
this tradition of innovation. Within
the Stryker Corporation, it focuses
exclusively on the intramedullary
treatment of fractures of long
bones and develops, manufactures
and distributes intramedullary
locking nails and their associated
instrumentation to the worldwide
market. Stryker Osteosynthesis has
created a new generation nailing
system, bringing together all the
capabilities and benefits of seperate
nailing systems to create a single,
integrated surgical resource for
fixation of long bone-fractures.
The T2 Intramedullary Nailing
System is Stryker´s latest and most
comprehensive development of the
original intramedullary nailing
principles presented by Prof. Gerhard
Küntscher in 1940.

Features & Benefits
Material Advantages
All T2 implants are made of Type II
anodized titanium alloy (Ti6AL4V) for
enhanced biomechanical performance.
Anodization:
Ti 6Al 4V
non anodized
Fatigue Strength*
Wear Rates*
Screw Improvements
T2 5mm versus GK 6.28mm (100%)
Ti 6Al 4V Type III
anodized
3
Ti 6Al 4V Type II
anodized
Improved Fatigue Strength* Lower Insertion Torque* Improved Thread/Head Design
Due to the rounded geometry of
the thread and the specialized
manufacturing techniques used,
the T2 5mm screws are stronger
than the clinically successful
6.28mm and 4.6mm GK screws.
105% 50%
Cosmetic Treatment Functional Treatment
100% 100% 115%
23,70 mg 3,29 mg 0,05 mg
* test data available on request
** White Paper (B1000033) available on request
For Other Implants For T2 Implants
T2 5mm versus GK 6.28mm (100%)
Shorter srew tip with 3 cutting
flutes for:
• Faster, easier “Start”
• Better grip and less irritation
• Low profile head design to minimize
irritation
• Optimized interference between
screw and nail hole reduces
torsional play significantly**
Transition from the screw thread to
the head is right angled in order to:
• Prevent fracture during insertion
• Increase feel on final tightening

Features & Benefits
Proximal Humeral Nail
Precise Placement
• Multiple End Cap lengths
• Easy implant removal
• Enhanced stability due to interference
with subchondral bone
Versatility
• 6˚ bend
• Lateral entry medial to the
greater tuberosity
• Central insertion at the top of
the humeral head
Dynamic Locking
• Promotes fracture healing by
allowing micromotion
• Reduces risk of nail protrusion
Short Long
4
Stable Fixation
• Four threaded locking holes
• Nylon bushing to prevent
backout.
• Four 5.0mm screws in multiple
planes
Easy Insertion
• Cannulated design
• Reamed or unreamed insertion
over 2.2×800mm Guide Wire

Ordering Information - Implants
T2 Proximal Humerus Nail (REF 1832-xxxx)
Proximal Locking:
5.0mm Fully Threaded Locking Screws
End Caps
Standard
+2mm
+4mm
short
long
Titanium Diameter Length
REF mm mm
1896-5025S 5.0 25.0
1896-5027S 5.0 27.5
1896-5032S 5.0 32.5
18 9 6 -5035S 5.0 35.0
18 9 6 -5037S 5.0 37.5
18 9 6 -5040S 5.0 40.0
18 9 6 -5042S 5.0 42.5
18 9 6 -5045S 5.0 45.0
18 9 6 -5047S 5.0 47.5
18 9 6 -5050S 5.0 50.0
18 9 6 -5052S 5.0 52.5
18 9 6 -5055S 5.0 55.0
18 9 6 -5057S 5.0 57.5
18 9 6 -5060S 5.0 60.0
Titanium Diameter Length
REF mm mm
1832-0003S 6 Standard
1832-0002S 10 +2
1832-0004S 10 +4
Length REF REF
mm Ø8mm/left Ø8mm/right
150 1025S 1015S
220 (long) 2822S 3822S
240 (long) 2824S 3824S
260 (long) 2826S 3826S
280 (long) 2828S 3828S
300 (long) 2830S 3830S
Example: T2 Proximal Humerus Nail right Ø8mm×260mm = 1832-3826S
Distal Locking:
4.0mm Fully Threaded Locking Screws
Titanium Diameter Length
REF mm mm
Washer
round
rectangular
small
5
1896-4020S 4.0 20
1896-4022S 4.0 22
1896-4024S 4.0 24
1896-4025S 4.0 25
1896-4026S 4.0 26
1896-4028S 4.0 28
1896-4030S 4.0 30
1896-4032S 4.0 32
1896-4034S 4.0 34
1896-4035S 4.0 35
1896-4036S 4.0 36
1896-4038S 4.0 38
1896-4040S 4.0 40
1896-4045S 4.0 45
1896-4050S 4.0 50
1896-4055S 4.0 55
1896-4060S 4.0 60
Titanium Diameter Dimension
REF mm mm
1832-0007S 17 –
(round)
1832-0008S – 10×18
(rectangular)
1832-0009S – 8×14.7
(small)

Features & Benefits
Humeral Nail
Precise Placement
• Multiple End Cap lengths
• Easy implant removal
Versatility
• Transverse locking
• Oblique locking
• Option of dynamization and
mechanical compression
Antegrade Retrograde
6
Reduced Inventory
• ONE nail for antegrade or
retrograde insertion
• ONE nail for left or right
• 4.0mm screws only
Easy Insertion
• Cannulated design
• Reamed or unreamed insertion
over 2.2×800mm Guide Wire
• 4˚ bend at the nail end for easy
insertion in retrograde approach
Less Pain Potential *
• Up to 6mm of active compression
• Early weight bearing
• Promotes fracture healing of nonunions
* Thomas Mueckley, Oliver Gonschorek,
Volker Buehren “Compression Nailing of
Long Bones” Eur J Trauma 2003; 29:113–28

Ordering Information - Implants
T2 Humeral Locking Nail (REF 1830-xxxx)
4.0mm Fully Threaded Locking Screws
End Caps
Standard +5mm +10mm
+15mm +20mm +25mm
Titanium Diameter Length
REF mm mm
1896-4020S 4.0 20
1896-4022S 4.0 22
1896-4024S 4.0 24
1896-4025S 4.0 25
1896-4026S 4.0 26
1896-4028S 4.0 28
1896-4030S 4.0 30
1896-4032S 4.0 32
1896-4034S 4.0 34
1896-4035S 4.0 35
1896-4036S 4.0 36
1896-4038S 4.0 38
1896-4040S 4.0 40
1896-4045S 4.0 45
1896-4050S 4.0 50
1896-4055S 4.0 55
1896-4060S 4.0 60
Titanium Diameter Length
REF mm mm
1830-0003S 6.0 Standard
1830-0005S 8.0 +5
1830-0010S 8.0 +10
1830-0015S 8.0 +15
1830-0020S 8.0 +20
1830-0025S 8.0 +25
Length REF REF REF
mm Ø7mm Ø8mm Ø9mm
140 0714S 0814S 0914S
160 0716S 0816S 0916S
180 0718S 0818S 0918S
190 0719S 0819S 0919S
200 0720S 0820S 0920S
210 0721S 0821S 0921S
220 0722S 0822S 0922S
230 0723S 0823S 0923S
240 0724S 0824S 0924S
250 0725S 0825S 0925S
260 0726S 0826S 0926S
270 0727S 0827S 0927S
280 0728S 0828S 0928S
290 0729S 0829S 0929S
300 0730S 0830S 0930S
310 0731S 0831S 0931S
320 0732S 0832S 0932S
Example: T2 Humeral Nail Ø8mm×260mm = 1830-0826S
4.0mm Partially Threaded Locking Screws
Washer
round
rectangular
Titanium Diameter Length
REF mm mm
1891-4020S 4.0 20
1891-4022S 4.0 22
1891-4024S 4.0 24
1891-4025S 4.0 25
1891-4026S 4.0 26
1891-4028S 4.0 28
1891-4030S 4.0 30
1891-4032S 4.0 32
1891-4034S 4.0 34
1891-4035S 4.0 35
1891-4036S 4.0 36
1891-4038S 4.0 38
1891-4040S 4.0 40
1891-4045S 4.0 45
1891-4050S 4.0 50
1891-4055S 4.0 55
1891-4060S 4.0 60
Titanium Diameter Dimension
REF mm mm
1830-0008S round –
1830-0009S – square
Advanced Compression Screw, Humerus
7
Titanium Diameter
REF mm
1830-0001S 6.0

Features & Benefits
Femoral Nail
Precise Placement
• Multiple End Cap lengths
• Easy implant removal
Less Pain Potential *
• Up to 10mm of active
compression
• Early weight bearing
• Promotes fracture healing of
non-unions
Antegrade Retrograde
8
Reduced Inventory
• ONE nail for antegrade or
retrograde insertion
• ONE nail for left or right
• 5.0mm screws only
Easy Insertion
• Cannulated design
• Reamed or unreamed insertion
over 3×1000mm Guide Wire
• No Guide Wire exchange required
Stable Fixation
• 5.0mm cannulated Condyle Screws
• Polyaxial Washers
• Insertion over K-Wires
• Up to 7mm of mediolateral
interfragmentary compression
• End Cap tightens down on most
distal Locking Screw/Condyle Screw
and provides angular stability
* Thomas Mueckley, Oliver Gonschorek,
Volker Buehren “Compression Nailing of
Long Bones” Eur J Trauma 2003; 29:113–28

Ordering Information - Implants
T2 Femoral Locking Nail (REF 1825-xxxx)
5.0mm Fully Threaded Locking Screws
End Caps
Standard +5mm +10mm
+15mm +20mm +25mm
Titanium Diameter Length
REF mm mm
1896-5025S 5.0 25.0
1896-5027S 5.0 27.5
1896-5030S 5.0 30.0
1896-5032S 5.0 32.5
1896-5035S 5.0 35.0
1896-5037S 5.0 37.5
1896-5040S 5.0 40.0
1896-5042S 5.0 42.5
1896-5045S 5.0 45.0
1896-5047S 5.0 47.5
1896-5050S 5.0 50.0
1896-5052S 5.0 52.5
1896-5055S 5.0 55.0
1896-5057S 5.0 57.5
1896-5060S 5.0 60.0
1896-5065S 5.0 65.0
1896-5070S 5.0 70.0
1896-5075S 5.0 75.0
1896-5080S 5.0 80.0
1896-5085S 5.0 85.0
1896-5090S 5.0 90.0
1896-5095S 5.0 95.0
1896-5100S 5.0 100.0
1896-5105S 5.0 105.0
1896-5110S 5.0 110.0
1896-5115S 5.0 115.0
1896-5120S 5.0 120.0
Titanium Diameter Length
REF mm mm
1822-0003S 8.0 Standard
1822-0005S 11.5 + 5
1822-0010S 11.5 +10
1822-0015S 11.5 +15
1822-0020S 11.5 +20
1822-0025S 11.5 +25
1822-0030S 11.5 +30
1822-0035S 11.5 +35
Length REF REF REF REF REF REF REF
mm Ø9mm Ø10mm Ø11mm Ø12mm Ø13mm Ø14mm Ø15mm
140 0914S 1014S 1114S 1214S 1314S 1414S 1514S
160 0916S 1016S 1116S 1216S 1316S 1416S 1516S
180 0918S 1018S 1118S 1218S 1318S 1418S 1518S
200 0920S 1020S 1120S 1220S 1320S 1420S 1520S
220 0922S 1022S 1122S 1222S 1322S 1422S 1522S
240 0924S 1024S 1124S 1224S 1324S 1424S 1524S
260 0926S 1026S 1126S 1226S 1326S 1426S 1526S
280 0928S 1028S 1128S 1228S 1326S 1426S 1526S
300 0930S 1030S 1130S 1230S 1330S 1430S 1530S
320 0932S 1032S 1132S 1232S 1332S 1432S 1532S
340 0934S 1034S 1134S 1234S 1334S 1434S 1534S
360 0936S 1036S 1136S 1236S 1336S 1436S 1536S
380 0938S 1038S 1138S 1238S 1338S 1438S 1538S
400 0940S 1040S 1140S 1240S 1340S 1440S 1540S
420 0942S 1042S 1142S 1242S 1342S 1442S 1542S
440 0944S 1044S 1144S 1244S 1344S 1444S 1544S
460 0946S 1046S 1146S 1246S 1346S 1446S 1546S
480 0948S 1048S 1148S 1248S 1348S 1448S 1548S
5.0mm Partially Threaded Locking Screws
5.0mm Condyle Screws
+30mm +35mm
Advanced Compression Screw, Femur Condyle Nut
Titanium Diameter
REF mm
1825-0001S 8.0
Example: T2 Femoral Nail Ø10mm×260mm = 1825-1026S
9
Titanium Diameter Length
REF mm mm
1891-5025S 5.0 25
1891-5030S 5.0 30
1891-5035S 5.0 35
1891-5040S 5.0 40
1891-5045S 5.0 45
1891-5050S 5.0 50
1891-5055S 5.0 55
1891-5060S 5.0 60
1891-5065S 5.0 65
1891-5070S 5.0 70
1891-5075S 5.0 75
1891-5080S 5.0 80
1891-5085S 5.0 85
1891-5090S 5.0 90
1891-5095S 5.0 95
1891-5100S 5.0 100
1891-5105S 5.0 105
1891-5110S 5.0 110
1891-5115S 5.0 115
1891-5120S 5.0 120
Titanium Diameter Length
REF mm mm
1895-5040S 5.0 40
1895-5045S 5.0 45
1895-5050S 5.0 50
1895-5055S 5.0 55
1895-5060S 5.0 60
1895-5065S 5.0 65
1895-5070S 5.0 70
1895-5075S 5.0 75
1895-5080S 5.0 80
1895-5085S 5.0 85
1895-5090S 5.0 90
1895-5095S 5.0 95
1895-5100S 5.0 100
1895-5105S 5.0 105
1895-5110S 5.0 110
1895-5115S 5.0 115
1895-5120S 5.0 120
Titanium Diameter
REF mm
1895-5001S 5.0

Features & Benefits
Recon / Antegrade Femoral Nail
Enhanced Lag Screw Placement
• 6.5mm cannulated Lag Screws
• Insertion over K-Wires
• Improved thread design of
proven Asnis III Screws
• Lag Screw hole geometry allows
placement in narrow femoral necks
Easy Insertion
• 4˚ lateral bend
• 2m radius
• Lateral entry at the tip of the
greater trochanter
• Cannulated design
• Reamed or unreamed insertion
over 3×1000mm Guide Wire
• No Guide Wire exchange
required
Recon Antegrade
10
Reduced Inventory
• ONE nail for recon or antegrade
femoral application
• 5.0mm screws for all antegrade
femoral applications
Precise Placement
• Multiple End Cap lengths
• Easy implant removal
• Set screw tightens down on
proximal Locking Screw and
provides angular stability
Dynamic Locking
• Promotes fracture healing by
allowing micromotion

Ordering Information - Implants
T2 Recon Nail (REF left 1846-xxxx / right 1847-xxxx)
5.0mm Fully Threaded Locking Screws
End Caps
Standard +5mm
+10mm +15mm
left right
Titanium Diameter Length
REF mm mm
18 9 6 -5025S 5.0 25.0
1896-5027S 5.0 27.5
18 9 6 -5030S 5.0 30.0
18 9 6 -5032S 5.0 32.5
18 9 6 -5035S 5.0 35.0
18 9 6 -5037S 5.0 37.5
18 9 6 -5040S 5.0 40.0
18 9 6 -5042S 5.0 42.5
18 9 6 -5045S 5.0 45.0
18 9 6 -5047S 5.0 47.5
18 9 6 -5050S 5.0 50.0
18 9 6 -5052S 5.0 52.5
18 9 6 -5055S 5.0 55.0
18 9 6 -5057S 5.0 57.5
18 9 6 -5060S 5.0 60.0
1896-5065S 5.0 65.0
1896-5070S 5.0 70.0
1896-5075S 5.0 75.0
1896-5080S 5.0 80.0
1896-5085S 5.0 85.0
1896-5090S 5.0 90.0
1896-5095S 5.0 95.0
1896-5100S 5.0 100.0
1896-5105S 5.0 105.0
1896-5110S 5.0 110.0
1896-5115S 5.0 115.0
1896-5120S 5.0 120.0
Titanium Diameter Length
REF mm mm
1822-0003S 8.0 Standard
1847-0005S 13.0 + 5mm
1847-0010S 13.0 +10mm
1847-0015S 13.0 +15mm
Length REF REF REF REF
mm Ø9mm Ø11mm Ø13mm Ø15mm
340 0934S 1134S 1334S 1534S
360 0936S 1136S 1336S 1536S
380 0938S 1138S 1338S 1538S
400 0940S 1140S 1340S 1540S
420 0942S 1142S 1342S 1542S
440 0944S 1144S 1344S 1544S
460 0946S 1146S 1346S 1546S
480 0948S 1148S 1348S 1548S
Example: T2 Recon Nail right Ø9mm×360mm = 1847-0936S
6.5mm Lag Screw
Set Screw
11
Titanium Diameter Length
REF mm mm
1897-6065S 6.5 65
1897-6070S 6.5 70
1897-6075S 6.5 75
1897-6080S 6.5 80
1897-6085S 6.5 85
1897-6090S 6.5 90
1897-6095S 6.5 95
1897-6100S 6.5 100
1897-6105S 6.5 105
1897-6110S 6.5 110
1897-6115S 6.5 115
1897-6120S 6.5 120
1897-6125S 6.5 125
1897-6130S 6.5 130
Titanium Description Length
REF mm
1847-0003S Antegrade 8.0
1847-0001S Retrograde 8.0

Features & Benefits
Supracondylar Nail
Reduced OR Time
• Guided locking of all screws for
170mm and 200mm implants
Stable Fixation
• Three-plane fixation with four
screws within 32mm of the nail end
• Most distal hole is centered at 6mm
to the nail end
• 5.0mm cannulated Condyle Screws
• Insertion over K-Wires
• Polyaxial Washers
• Up to 7mm of mediolateral
interfragmentary compression
• End Cap tightens down on most
distal Locking Screw/Condyle Screw
and provides angular Stability
Short Long
12
Dynamic Locking
• Promotes fracture healing by
allowing micromotion
Easy Insertion
• 4˚ bend
• 2m radius
• Cannulated design
• Reamed or unreamed insertion
over 3×1000mm Guide Wire
• No Guide Wire exchange
required

Ordering Information - Implants
T2 SCN (REF 1826-xxxx)
short
long
5.0mm Fully Threaded Locking Screws
End Cap
Titanium Diameter Length
REF mm mm
18 9 6 -5025S 5.0 25.0
1896-5027S 5.0 27.5
18 9 6 -5030S 5.0 30.0
18 9 6 -5032S 5.0 32.5
18 9 6 -5035S 5.0 35.0
18 9 6 -5037S 5.0 37.5
18 9 6 -5040S 5.0 40.0
18 9 6 -5042S 5.0 42.5
18 9 6 -5045S 5.0 45.0
18 9 6 -5047S 5.0 47.5
18 9 6 -5050S 5.0 50.0
18 9 6 -5052S 5.0 52.5
18 9 6 -5055S 5.0 55.0
18 9 6 -5057S 5.0 57.5
18 9 6 -5060S 5.0 60.0
1896-5065S 5.0 65.0
1896-5070S 5.0 70.0
1896-5075S 5.0 75.0
1896-5080S 5.0 80.0
1896-5085S 5.0 85.0
1896-5090S 5.0 90.0
1896-5095S 5.0 95.0
1896-5100S 5.0 100.0
1896-5105S 5.0 105.0
1896-5110S 5.0 110.0
1896-5115S 5.0 115.0
1896-5120S 5.0 120.0
Titanium Diameter
REF mm
1826-0003S 8.0
Length REF REF REF REF REF REF
mm Ø9mm Ø10mm Ø11mm Ø12mm Ø13mm Ø14mm
170 (short) 0917S 1017S 1117S 1217S 1317S 1417S
200 (short) 0920S 1020S 1120S 1220S 1320S 1420S
240 (long) 0924S 1024S 1124S 1224S 1324S 1424S
260 (long) 0926S 1026S 1126S 1226S 1326S 1426S
280 (long) 0928S 1028S 1128S 1228S 1328S 1428S
300 (long) 0930S 1030S 1130S 1230S 1330S 1430S
320 (long) 0932S 1032S 1132S 1232S 1332S 1432S
340 (long) 0934S 1034S 1134S 1234S 1334S 1434S
360 (long) 0936S 1036S 1136S 1236S 1336S 1436S
380 (long) 0938S 1038S 1138S 1238S 1338S 1438S
400 (long) 0940S 1040S 1140S 1240S 1340S 1440S
420 (long) 0942S 1042S 1142S 1242S 1342S 1442S
440 (long) 0944S 1044S 1144S 1244S 1344S 1444S
Example: T2 SCN Nail Ø9mm×420mm = 1826-0942S
5.0mm Condyle Screws
Condyle Nut
13
Titanium Diameter Length
REF mm mm
1895-5040S 5.0 40
1895-5045S 5.0 45
1895-5050S 5.0 50
1895-5055S 5.0 55
1895-5060S 5.0 60
1895-5065S 5.0 65
1895-5070S 5.0 70
1895-5075S 5.0 75
1895-5080S 5.0 80
1895-5085S 5.0 85
1895-5090S 5.0 90
1895-5095S 5.0 95
1895-5100S 5.0 100
1895-5105S 5.0 105
1895-5110S 5.0 110
1895-5115S 5.0 115
1895-5120S 5.0 120
Titanium Diameter
REF mm
1895-5001S 5.0

Features & Benefits
Knee Arthrodesis Nail
Design Rationale
Unique dual curvature:
• Enables anatomical valgus at the knee
• Improves nail insertion
Easy Insertion
• Cannulated design
• Dedicated 885mm Bixcut Reamer Shaft
• Reamed insertion over 3×1250mm Guide
Wire
• No Guide Wire exchange required
14
Reduced Learning Curve
• Uses standard T2 femur
instrumentation
• 5.0mm screws only
(same as T2 femur)
• Multiple End Caps provide optimal
length adjustment
(same as T2 Femur)
Less Pain Potential *
• Up to 10mm of active compression
• Early weight bearing
• Promotes consolidation
* Thomas Mueckley, Oliver Gonschorek, Volker
Buehren “Compression Nailing of Long Bones”
Eur J Trauma 2003; 29:113–28

Ordering Information - Implants
T2 Arthrodesis Nail (REF 1829-xxxx)
left right
Length REF REF REF REF
mm Ø11.5mm/left Ø11.5mm/right Ø13mm/left Ø13mm/right
540 1104S 1154S 1304S 1354S
580 1108S 1158S 1308S 1358S
620 1112S 1162S 1312S 1362S
640 1116S 1166S 1316S 1366S
700 1120S 1170S 1320S 1370S
740 1124S 1174S 1324S 1374S
780 1128S 1178S 1328S 1378S
Example: T2 Arthrodesis Nail left Ø13mm×780mm = 1829-1328S
5.0mm Fully Threaded Locking Screws 5.0mm Partially Threaded Locking Screws
End Caps
Standard +5mm +10mm
+15mm +20mm +25mm
+30mm +35mm
Titanium Diameter Length
REF mm mm
18 9 6 -5025S 5.0 25.0
1896-5027S 5.0 27.5
18 9 6 -5030S 5.0 30.0
18 9 6 -5032S 5.0 32.5
18 9 6 -5035S 5.0 35.0
18 9 6 -5037S 5.0 37.5
18 9 6 -5040S 5.0 40.0
18 9 6 -5042S 5.0 42.5
18 9 6 -5045S 5.0 45.0
18 9 6 -5047S 5.0 47.5
18 9 6 -5050S 5.0 50.0
18 9 6 -5052S 5.0 52.5
18 9 6 -5055S 5.0 55.0
18 9 6 -5057S 5.0 57.5
18 9 6 -5060S 5.0 60.0
1896-5065S 5.0 65.0
1896-5070S 5.0 70.0
1896-5075S 5.0 75.0
1896-5080S 5.0 80.0
1896-5085S 5.0 85.0
1896-5090S 5.0 90.0
1896-5095S 5.0 95.0
1896-5100S 5.0 100.0
1896-5105S 5.0 105.0
1896-5110S 5.0 110.0
1896-5115S 5.0 115.0
1896-5120S 5.0 120.0
Titanium Diameter Length
REF mm mm
1822-0003S 8.0 Standard
1822-0005S 11.5 + 5
1822-0010S 11.5 +10
1822-0015S 11.5 +15
1822-0020S 11.5 +20
1822-0025S 11.5 +25
1822-0030S 11.5 +30
1822-0035S 11.5 +35
Compression Screws
15
Titanium Diameter Length
REF mm mm
1891-5025S 5.0 25
1891-5030S 5.0 30
1891-5035S 5.0 35
1891-5040S 5.0 40
1891-5045S 5.0 45
1891-5050S 5.0 50
1891-5055S 5.0 55
1891-5060S 5.0 60
1891-5065S 5.0 65
1891-5070S 5.0 70
1891-5075S 5.0 75
1891-5080S 5.0 80
1891-5085S 5.0 85
1891-5090S 5.0 90
1891-5095S 5.0 95
1891-5100S 5.0 100
1891-5105S 5.0 105
1891-5110S 5.0 110
1891-5115S 5.0 115
1891-5120S 5.0 120
Titanium Diameter Length
REF mm mm
1825-0000S 8.0 Standard
18 2 5 - 0005S 8.0 5
18 2 5 - 0010S 8.0 10
18 2 5 - 0015S 8.0 15

Features & Benefits
Tibial Nail
16
Precise Placement
• Multiple End Cap lengths
• Easy implant removal
Stable Fixation
• Multiplane fixation
• 5.0mm screws for all 9−15mm nails**
Less Pain Potential *
• Up to 7mm of active compression
• Early weight bearing
• Promotes fracture healing of nonunions
Easy Insertion
• 10˚ proximal Herzog bend
• 4˚ distal bend
• Cannulated design
• Reamed or unreamed insertion over
3×800mm Guide Wire
• No Guide Wire exchange required
for all 9−15mm nails
Extremely Distal Locking Holes
• Two-Plane fixation with three
screws within 25mm of the nail end
• Most distal hole is centered at 5mm
from the nail end
• At the time of this printing, the T2
tibial nail has the longest working
length of any competitive tibial nail
available
* Thomas Mueckley, Oliver Gonschorek, Volker
Buehren “Compression Nailing of Long Bones” Eur
J Trauma 2003; 29:113–28
** 8mm Tibial Nail uses 4.0mm Screws for Distal
Locking

Ordering Information - Implants**
T2 Standard Tibial Nail (REF 1822-xxxx)
5.0mm Fully Threaded Locking Screws
End Caps
Standard +5mm
+10mm +15mm
Titanium Diameter Length
REF mm mm
18 9 6 -5025S 5.0 25.0
1896-5027S 5.0 27.5
18 9 6 -5030S 5.0 30.0
18 9 6 -5032S 5.0 32.5
18 9 6 -5035S 5.0 35.0
18 9 6 -5037S 5.0 37.5
18 9 6 -5040S 5.0 40.0
18 9 6 -5042S 5.0 42.5
18 9 6 -5045S 5.0 45.0
18 9 6 -5047S 5.0 47.5
18 9 6 -5050S 5.0 50.0
18 9 6 -5052S 5.0 52.5
18 9 6 -5055S 5.0 55.0
18 9 6 -5057S 5.0 57.5
18 9 6 -5060S 5.0 60.0
1896-5065S 5.0 65.0
1896-5070S 5.0 70.0
1896-5075S 5.0 75.0
1896-5080S 5.0 80.0
1896-5085S 5.0 85.0
1896-5090S 5.0 90.0
1896-5095S 5.0 95.0
1896-5100S 5.0 100.0
1896-5105S 5.0 105.0
1896-5110S 5.0 110.0
1896-5115S 5.0 115.0
1896-5120S 5.0 120.0
Titanium Diameter Length
REF mm mm
1822-0003S 8.0 Standard
1822-0005S 11.5 + 5
1822-0010S 11.5 +10
1822-0015S 11.5 +15
Advanced Compression Screw, Tibia
Titanium Diameter
REF mm
1822-0001S 8.0
Length REF REF REF REF REF REF REF
mm Ø9mm Ø10mm Ø11mm Ø12mm Ø13mm Ø14mm Ø15mm
240 0924S 1024S 1124S 1224S 1324S 1424S 1524S
255 0925S 1025S 1125S 1225S 1325S 1425S 1525S
270 0927S 1027S 1127S 1227S 1327S 1427S 1527S
285 0928S 1028S 1128S 1228S 1328S 1428S 1528S
300 0930S 1030S 1130S 1230S 1330S 1430S 1530S
315 0931S 1031S 1131S 1231S 1331S 1431S 1531S
330 0933S 1033S 1133S 1233S 1333S 1433S 1533S
345 0934S 1034S 1134S 1234S 1334S 1434S 1534S
360 0936S 1036S 1136S 1236S 1336S 1436S 1536S
375 0937S 1037S 1137S 1237S 1337S 1437S 1537S
390 0939S 1039S 1139S 1239S 1339S 1439S 1539S
405 0940S 1040S 1140S 1240S 1340S 1440S 1540S
420 0942S 1042S 1142S 1242S 1342S 1442S 1542S
Example: T2 Tibial Nail Ø10mm×300mm = 1822-1030S
5.0mm Partially Threaded Locking Screws
4.0mm Fully Threaded Locking Screws*
17
Titanium Diameter Length
REF mm mm
1891-5025S 5.0 25
1891-5030S 5.0 30
1891-5035S 5.0 35
1891-5040S 5.0 40
1891-5045S 5.0 45
1891-5050S 5.0 50
1891-5055S 5.0 55
1891-5060S 5.0 60
1891-5065S 5.0 65
1891-5070S 5.0 70
1891-5075S 5.0 75
1891-5080S 5.0 80
1891-5085S 5.0 85
1891-5090S 5.0 90
1891-5095S 5.0 95
1891-5100S 5.0 100
1891-5105S 5.0 105
1891-5110S 5.0 110
1891-5115S 5.0 115
1891-5120S 5.0 120
Titanium Diameter Length
REF mm mm
1896-4020S 4.0 20.0
1896-4025S 4.0 25.0
1896-4030S 4.0 30.0
1896-4035S 4.0 35.0
1896-4040S 4.0 40.0
1896-4045S 4.0 45.0
1896-4050S 4.0 50.0
1896-4055S 4.0 55.0
1896-4060S 4.0 60.0
* For Ø8mm Nail Distal Locking Only
** For detailed Ordering Information please refer to
the dedicated Operative Technique.

Features & Benefits
Ankle Arthrodesis Nail
Easy Insertion
• Cannulated Design
• Unreamed or Reamed Insertion
over 3×1000mm Guide Wire
• No Guide Wire exchange required
Anatomical Fit
• 5° lateral (valgus) bend
• Partially threaded Locking Screw
• Up to 5 mm active compression
Controlled Apposition/
Compression
• L/M Direction
• Partially threaded Locking Screw
• Up to 5mm active compression
• Cannulated Compression Screw for
direct insertion over the Guide Wire
or in “preloaded” manner
Stable Fixation
• M/L direction
• Fixed angle threaded
Aiming Adapter
An additional Aiming Adapter can
be attached to the Targeting Device
to help achieve the appropriate
rotation based on the position of the
PA Calcaneal Screw aligned with the
Anatomic Calcaneal body axis.
18
Proximal Locking Options
• Target device guided
• M/L direction
• Proximal locking configuration
features a round and an oblong hole
to allow for static or dynamic locking
Multiple End Caps
End Caps are available in different
sizes to provide improved fit for every
indication and to lock down on the PA
Calacneus Screw. This creates a fixed
angle between the nail and Locking
Screw.
• Driving end 7.5mm
• End Cap locks P/A Calcaneus
Locking Screw
Anatomical Fit
Distal Locking Screw in P/A direction
with a proximal one in a 10° angle
from postero-medial to anterolateral.
This design dictates the need
for left and right nails but allows
for anatomical fit with internal
compression. This technique is
preferred because of higher union
rates, shorter fusion times, and fewer
complications.
anterior
10°
lateral medial
View from distal

Ordering Information - Implants
T2 Standard Ankle Arthrodesis Nail
5.0mm Fully Threaded Locking Screws
End Caps
Standard +5mm
+10mm +15mm
Left
REF Diameter Length
mm mm
1818-1015S 10 150
1818-1020S 10 200
1818-1030S 10 300
1818-1115S 11 150
1818-1120S 11 200
1818-1130S 11 300
1818-1215S 12 150
1818-1220S 12 200
1818-1230S 12 300
Titanium Diameter Length
REF mm mm
18 9 6 -5025S 5.0 25.0
1896-5027S 5.0 27.5
18 9 6 -5030S 5.0 30.0
18 9 6 -5032S 5.0 32.5
18 9 6 -5035S 5.0 35.0
18 9 6 -5037S 5.0 37.5
18 9 6 -5040S 5.0 40.0
18 9 6 -5042S 5.0 42.5
18 9 6 -5045S 5.0 45.0
18 9 6 -5047S 5.0 47.5
18 9 6 -5050S 5.0 50.0
18 9 6 -5052S 5.0 52.5
18 9 6 -5055S 5.0 55.0
18 9 6 -5057S 5.0 57.5
18 9 6 -5060S 5.0 60.0
1896-5065S 5.0 65.0
1896-5070S 5.0 70.0
1896-5075S 5.0 75.0
1896-5080S 5.0 80.0
1896-5085S 5.0 85.0
1896-5090S 5.0 90.0
1896-5095S 5.0 95.0
1896-5100S 5.0 100.0
1896-5105S 5.0 105.0
1896-5110S 5.0 110.0
1896-5115S 5.0 115.0
1896-5120S 5.0 120.0
Titanium Diameter Length
REF mm mm
1826-0003S 8.0 4.0
1818-0005S 12.0 + 5
1818-0010S 12.0 +10
1818-0015S 12.0 +15
19
Right
REF Diameter Length
mm mm
1819-1015S 10 150
1819-1020S 10 200
1819-1030S 10 300
1819-1115S 11 150
1819-1120S 11 200
1819-1130S 11 300
1819-1215S 12 150
1819-1220S 12 200
1819-1230S 12 300
5.0mm Partially Threaded Locking Screws
Titanium Diameter Length
REF mm mm
1891-5025S 5.0 25
1891-5030S 5.0 30
1891-5035S 5.0 35
1891-5040S 5.0 40
1891-5045S 5.0 45
1891-5050S 5.0 50
1891-5055S 5.0 55
1891-5060S 5.0 60
1891-5065S 5.0 65
1891-5070S 5.0 70
1891-5075S 5.0 75
1891-5080S 5.0 80
1891-5085S 5.0 85
1891-5090S 5.0 90
1891-5095S 5.0 95
1891-5100S 5.0 100
1891-5105S 5.0 105
1891-5110S 5.0 110
1891-5115S 5.0 115
1891-5120S 5.0 120
Compression Screw (cannulated)
Titanium Diameter Length
REF mm mm
1818-0001S 8.0 14.5

Stryker Navigation
Trauma Navigation System
The Trauma Navigation System is
a generic tool box that generally
supports all kind of trauma
surgery applications. The following
applications benefit most from
navigation and are fully supported by
the system:
• Nailing (entry point,
reposition, distal targeting)
• Lag Screw positioning -
Gamma Nail
• Screw placement for Pelvis,
Hip, Femur and Tibia fractures
Key Features Key Benefits
Accurate Fluoroscopy Based Navigation
Smart Navigation Technology
(Active and Wireless)
Widely Compatible Dedicated Trauma
Instruments with Easy Calibration
Clear and Intuitive Software
User Interface
Virtual C-Arm Guidance
Drop In Screw Planning Capability and Distance/
Angle Measurements
Compatible with Other Stryker Navigation
Systems (Spine, Knee, Hip, ENT, Neuro)
The generic software, the universal
patient anchoring system and the
universal set of dedicated instruments
cover also many further trauma
applications. Generally all steps
described in the available Navigation
Surgery Technique for the selected
applications apply to further
applications in a similar way.
The dedicated instruments are widely
compatible and represent an open
platform for different implant systems,
although Stryker Implant Systems are
best supported.
20
Accurate Implant Positioning,
Significant Reduction of Radiation Exposure
Provides an Unrestrained Field
Simplicity to Surgeon and Staff
Simplicity to Surgeon and Staff
Reduction of Radiation Exposure when Targeting
Field of View
Intra-Operative Intervention Planning and
Documentation

Stryker Navigation
System Components
Anchoring System 1
Smart Tools 2
Tool Tracker/ Patient Tracker Point Calibration Device Pointer
Fluoroscopy Tracker (C-Arm Adapter)
System Platform 2
Anchoring Pins
Trauma Instruments 3
Navigated Curved Awl
Localizer Camera
Navigated Guide Sleeves
Navigated Screwdrivers Tool Axis Adapter
1 Selzach Trauma AG Selzach
2 Stryker Instruments - Navigation
3 Stryker Trauma GmbH Kiel
Insertion Tool
Hoffmann Couplings 3–4/5mm and 5/5mm
21
Universal Tracker Adapter Pin
Nail Target Device Adapters
Laptop Stand
Navigated Lag Screw Sleeve
Gamma and Gamma3
Chuck Axis Adapter for
Stryker Powertools

This document is intended solely for the use of healthcare professionals. A surgeon must always rely on his or her own
professional clinical judgment when deciding whether to use a particular product when treating a particular patient.
Stryker does not dispense medical advice and recommends that surgeons be trained in the use of any particular product
before using it in surgery. The information presented in this brochure is intended to demonstrate a Stryker product.
Always refer to the package insert, product label and/or user instructions including the instructions for Cleaning and
Sterilization (if applicable) before using any Stryker products. Products may not be available in all markets. Product
availability is subject to the regulatory or medical practices that govern individual markets. Please contact your Stryker
representative if you have questions about the availability of Stryker products in your area.
Stryker Corporation or its divisions or other corporate affiliated entities own, use or have applied for the following
trademarks or service marks: Stryker, Bixcut, T2, Hoffmanns and Asnis III.
All other trademarks are trademarks of their respective owners or holders.
The products listed above are CE marked.
Literature Number : B1000007
LOT D0809
Copyright © 2009 Stryker
Stryker Trauma GmbH
Prof.-Küntscher-Straße 1−5
D - 24232 Schönkirchen
Germany
www.osteosynthesis.stryker.com