Here - Robbe

Key to symbols 

Internal-combustion-motors: 

This symbol shows how your model is powered. 

Electric motors: 

This symbol shows how your model is powered. 

A new type of super-tough fine-cell particle foam 

consisting of polystyrene and polyethylene. 

The moulded foam components, most of them pre-coloured, 

are produced in CNC-machined metal moulds. Surface details 

and internal and external attachments are moulded-in as 

standard, reducing the building time considerably. 

“Made in Germany” products, distributed by robbe Modellsport, 

are designed in accordance with the latest findings, 

generally using sophisticated CAD techniques, and are produced 

using modern manufacturing processes. At all times 

we focus on the products’ successful use by end-users, so 

that our customers can gain maximum pleasure from our mutual 

hobby of modelling. 

This sticker is present on all Futaba products distributed by 

robbe Modellsport. It is your proof that the item is a genuine 

robbe-Futaba product. The guarantee only applies to items 

bearing this sticker. The unlimited support of our Service 

department is only available for these items. Removing the 

sticker breaks the chain of proof that the item in question is 

a genuine robbe-Futaba product. 

As of 02.01.2008 our Service Department will exclusively 

check and / or repair robbe and robbe-Futaba items which 

were supplied by robbe Modellsport through the model trade. 

These items are marked as such. Our Service Department 

constantly strives to provide you with a fast, efficient 

service. This costs time and money. We wish to be able to 

concentrate on meeting the needs of robbe customers. For 

this reason we will in future be unable to check or repair any 

item in any way which was not supplied by robbe through the 

model trade. 

Not even where payment is offered. 

All products which we supply carry a mark which proves that 

they are robbe or robbe-Futaba items. Only if this mark is still 

present can we be certain that the item is a robbe or robbe- 

Futaba product, which was supplied by robbe Modellsport via 

the model trade. It is therefore important that you ensure the 

presence of this mark on model goods when you purchase 

them. Any items not bearing this mark which are sent to our 

Service Department or are returned for repair will now be 

returned to the sender at the sender’s cost. 

This item cannot be purchased via robbe in F, I, GB, CH, E, 

N, S, America and Asia. The descriptions in the appropriate 

language are only for information purposes. 

We accept no liability for damage and consequent damage arising from the use of products from our range, as we have no control over the way they 

are installed, used and operated. We reserve the right to alter the specification of any item illustrated or listed in our catalogues. We accept no liability 

for printing errors. Texts, drawings and illustrations may not be reproduced in whole or in part, in any form, without our prior express written approval. 

All transactions involving our company are subject to the currently valid conditions of sale and supply. 

Many illustrations show tools, upgrade components and spare parts installed or in use, in order to show the potential of the product. 

Prices always apply solely to the stated Item No. 

robbe Modellsport GmbH & Co. KG • Metzloser Straße 38 • D-36355 Grebenhain •Telefon: ++ (0)6644 - 87-0 • Fax: ++ (0)6644 - 7412 • www.robbe.com 

Trade register: Gießen / Hessen District Court HRA 2722 • Partner with personal liability: robbe Modellsport Beteiligungsgesellschaft (Associated Company) GmbH, Cologne 27786, Germany 

Managing Directors: E. Dörr, G. Geiger 

© 2011, robbe Modellsport GmbH & Co. KG • Typesetting and data management: robbe Modellsport GmbH & Co. KG • Printing: Parzeller GmbH & Co. KG, Fulda • Photography: Fototeam Vollmer,Freiburg.

Content 

Aircraft 

Helicopters 

Free-flight models 

Slow- and Park-Flyers 

Gliders and Motor-gliders 

Power model 

Aircraft accessories 

Co-axial helicopters 

Helicopters 

Helicopter accessories 

Ships 

Vehicles 

Radio-control 

Electronics 

Accessories 

Yachts 

Race-boats 

Sport-boats 

Commercial-vessels 

Marine accessories 

Road-vehicles 

Off-road vehicles 

Vehicle accessories 

Cargo-Series 

Cargo-Series accessories 

Hand-transmitters 

Computer-transmitters 

Receiver 

Servos and Gyros 

Radio accessories 

Speed-controllers 

Chargers 

Batteries 

Electronic accessories 

Materials 

Tools 

Military models 

Submarines 

Ships 

Trucks 

Tanks 

Accessories for military models 

NN1

NN2 

The illustration shows the model assembled and fitted with additional accessories

EDGE 540 

No. 2552 

Designed by the Champions 

Our slow-fly model of the Edge 540 was 

developed in close collaboration with our 

team pilot, Robin Trumpp. Robin designed 

every aspect of this colourful aeroplane, and 

carried out numerous test-flights with the 

prototype to check and confirm its 3-D 

performance. Once the Edge had completed 

its initial flights successfully, robbe assumed 

the responsibility for converting the design 

into a production kit. 

The result of this co-operation is a very 

special slow-fly model characterised by the 

special spades. 

Robin Trumpp: „I consider it very important 

to continue practising through the Winter, to 

avoid losing form. In any case it‘s really 

terrific fun. I think the Edge already ranks as 

one of the best-looking and best-performing 

models available.“ 

Set contents 

• Depron parts with printed multi-colour 

finish 

• All carbon rod material required 

• CNC-machined epoxy horns and motor 

mount 

• Foam rubber wheels 

• Small parts 

• Comprehensive illustrated instructions 

Specification: 

Wingspan approx. 

840 mm 

Length approx. 

920 mm 

Total surface area approx. 19 dm 2 

Wing loading approx. 8 g/dm 2 

All-up weight approx. 

150 g 

RC functions 

Rudder, elevator, aileron, motor control 

Recommended accessories 

FF-6 (T6EXP) R617 2.4 GHz 6/7/0 

 

1x F4069 

Power Peak ® A4 EQ-LCD 230V/12V1x 8560 

Receiver charge lead Bec 1x F1418 

Essential accessories 

Servo S 3114 Nano 

1x F1352 

Servo FS 31 Pico 2x 8449 

Edge / Su-29 power set 1x 4668 

Propeller 8X4,3 Gws Ep Slowfly 2Pcs 

1x 77790804 

ROXXY ® -Power ZX 2S 350mAh 25C 

1x 4859 

 

 

 

 

 

 

 

 

 

 

 

NN3

NN4 

The illustration shows the model assembled and fitted with additional accessories

Su-29 

No. 2553 

Designed by the Champions 

As with the Edge 540 we have again 

exploited the outstanding expertise of one of 

our team pilots - Alexander Balzer - in the 

design of the Su-29. Alexander has incorporated 

all his skill and experience in the 

design of the Su-29. This has produced a 

slow-fly model whose sole purpose is to 

delight spectators with spectacular demonstration 

flights. The characteristic shape and 

distinctive colour scheme help to underline 

the superb overall impression of this great 

model. 

Alexander Balzer: „The model of the Su-29 

was designed to be outstanding for 3D 

flying, and its particular geometry and tall 

fuselage make it ideal for this application.“ 

Set contents 

• Multi-colour printed Depron components 

• All carbon fibre rod material required 

• CNC-machined GRP horns and motor 

mount 

• Foam rubber wheels 

• Small parts 

• Comprehensive illustrated assembly 

instructions 



850 mm 


870 mm 


Wing loading approx. 7.5 g/dm 2 


150 g 

RC functions 

Rudder, elevator, aileron, motor control 


FF-6 (T6EXP) R617 2.4 GHz 6/7/0 

 

1x F4069 

Power Peak ® A4 EQ-LCD 230V/12V 1x 8560 




1x F1352 

Servo FS 31 Pico 2x 8449 

Edge / Su-29 power set 1x 4668 

Propeller 8X4,3 Gws Ep Slowfly 2Pcs 

1x 77790804 


1x 4859 

 

 

 

 

 

 

 

 

 

 

 

NN5

Modelling on the Internet 

NN6 

The pictures show the built model, covered, with decals applied, with optional accessories fitted.

obbe Primo 

No. 2554 

Model glider for Internet-supported 

modelling 

Learn interesting manual skills, understand 

the laws of physics as they relate to model 

aircraft, and share the pleasure and 

satisfaction of seeing a model you have built 

yourself flying for the first time. Modelling 

provides all of this. 

However, many potential modellers find 

building their own glider a frightening 

prospect. This is exactly where the concept 

of the robbe Primo fits in: it is quick to build 

and offers ultra-docile handling in the air. 

However, since that alone may not be 

enough to persuade a newcomer to make 

the crucial decision, robbe provides the 

prospective Primo pilot with an entirely new 

and unique means of support. 

Every new owner of a Primo kit will find that 

it contains an access code to a robbe 

website, which is reserved exclusively for 

purchasers of this model. Here he can log in 

and find a large amount of information and 

assistance for building and operating the 

model. This includes text, pictures and 

videos which describe the model‘s construction 

in detail. There is similar support in the 

section entitled „First flight“. In this section 

the modeller finds the basics of radio control 

technology, the features which make a good 

flying site, weather considerations and much 

more. 

The „Workshop area“ presents the tools 

required and how they are used. Every 

Primo pilot also has access to a Help forum 

where he can pose questions to an experienced 

modeller, and receive specific 

answers relating to his robbe Primo. 

Primo: modelling goes Internet 

 

Set contents 

• Laser-cut plywood fuselage sides, formers, 

ribs etc. 

• Laser-cut balsa fin and tailplane 

• All linkage components, horns, tow-hook, 

various small items and screws 

• Vacuum-moulded nose-cone 

• Translucent blue and white Solarfilm 

covering material 

• Decal sheet 

• Comprehensive building instructions and 

tips on test-flying 

• Access code for Internet-supported 

building and flying instructions 

Specification, electric glider version: 

wingspan approx. 

1530 mm 


930 mm 




1140 g 

Specification, glider version: 

Wingspan 

approx. 1530 mm 

Length 

approx. 930 mm 



All-up weight approx. 

1000 g 

RC functions 

Rudder, elevator, motor control (optional) 


FF-6 (T6EXP) R617 2.4 GHz 6/7/0 1x F4069 

TX-battery 8 NiMh 2000 (2P) flat 1x 4548 


Servo 4.3 g 2x 8524 

Power Pack, 4 NiMH 1400 2/3A, square 

1x 4580 

Additional recommended accessories for 

the electric glider version: 

ROXXY ® BL Outrunner 2830-12 1x 4956 

ROXXY ® BL Control 918 1x 8628 

10 x 6“ folding propeller 1x 77731006 

40 D spinner 1x 7235 

ZX 2S 2200 mAh 25C LiPo batttery 1x 4871 

 

 

 

 

 

 

 

NN7

NN8 

The illustration shows the model assembled, with decals applied.

Snyper 2.4 GHz RTF 

No. 2548RTF 

Beginner‘s model glider with 

2.4 GHz RC system technology 

The beginners‘ model for the future model 

pilot. Swift, stable and easy to master. 

The model can very quickly be completed 

ready to fly. No need to worry about the first 

flight: fun is built-in as standard. You will very 

soon be trying your first loop, and the 

responsive Snyper almost lands itself. 

In this new, revised Ready-To-Fly version 

there is an extremely modern 2.4 GHz 

radio control system, making it much 

easier and safety to operate the model. 

 

Set contents 

• Arcel foam fuselage with integral fin and 

attached rudder 

• Fuselage nose moulded in tough plastic 

• 380-size electric motor, speed controller 

and servos installed as standard 

• Arcel wing and tailplane, with horns fitted 

• 2S1P 7.4 V / 1050 mAh LiPo battery 

• LiPo battery charger with balancer function 

• 2.4 GHz four-channel transmitter and 

receiver 

• Multi-colour decal sheet 

• Comprehensive illustrated operating 

instructions 



980 mm 


740 mm 

Total surface area approx. 14.5 dm 2 



370 g 

RC functions 

Rudder, elevator, motor control 


NiMH Mignon 1.2V AA 2500 mAh battery 

8x 8005 

Power Peak ® Uni 7 EQ, 230V 1x 8564 

Transmitter charge lead 1x F1415 


Mignon battery Alkaline AA-R6 8x 8008 

Replacement parts 


1x 4865 

Wing set Snyper RTF 1x 32590001 

Fuselage Snyper RTF 1x 32590002 

Stabiliser Set Snyper RTF 1x 32590003 

Propeller Bandit 1x 31575000 

E-Motor Super 380 1x 4743 

Air Control 819 Lipo 1x 8439 

Decalsheet 1x 25480001 

 

 

 

 

 

NN9

NN10 


Arcus 2.4 GHz RTF 

No. 2547RTF 

Electric-powered glider of Arcel 

construction with 2.4 GHz radio 

control system. 

A very attractive glider of proven Arcel 

construction, offering good looks and 

performance. Accurately moulded Arcel 

components mean that the Arcus can be 

assembled into an elegant glider in the 

absolute minimum of time. 

The outstanding features of the Arcus are its 

sleek appearance, dynamic handling and 

excellent performance. The model is fitted 

with aileron, rudder and elevator controls, 

and is capable of simple aerobatics. 

The real strength of the Arcus is its excellent 

thermal and slope-flying characteristics. At 

the slope the Arcus can be ballasted if 

necessary to suit the strength of the wind. 

This set contains the complete four-channel 

2.4 GHz radio control system, battery 

and charger. 

 

Set contents 

• Arcel fuselage with factory-fitted servos 

and control linkages 

• Integral brushless electric motor wired to 

electronic speed controller, folding 

propeller and spinner fitted 

• Ready-made Arcel canopy with magnet 

latch 

• Arcel wing panels with integral joiner 

system, two aileron servos and hinged 

ailerons, ready to use 

• High-quality carbon fibre tube wing joiner 

• Ready-made profiled Arcel tail panels with 

hinged control surfaces and horns fitted 

• 2S1P 7.4 V 1050 mAh LiPo battery 

• LiPo battery charger with balancer function 

• 2.4 GHz four-channel radio control system 

and receiver 


• Comprehensive illustrated building 

instructions 



1800 mm 


1120 mm 




560 g 

RC functions 

Aileron, rudder, elevator, motor control 



8x 8005 






Stabiliser set Arcus 1x 31170003 

Wings set Arcus 1x 31170004 

Fuselage Arcus 1x 31170005 

Folding propeller, 9x5 + spinner, D3, 

1x 31170007 

Folding propeller blade, 9x5, Arcus 

1x 31170008 

Arcus black canopy and magnet 

1x 31170009 

8 gram servo II 1x 8544 

Decalsheet 1x 25470001 

 

 

 

 

NN11

NN12 


ASW 15 2.4 GHz RTF 

No. 2546RTF 

Semi-scale powered glider of 

Arcel construction with electric 

power system and 2.4 GHz 

radio control system. 

The full-size glider was first introduced by 

Schleicher Flugzeugbau in 1968, and today 

ranks as one of the classic standard-class 

sailplanes. Like the full-size machine, the 

ASW 15 offers ‚full-house‘ control, and has 

an impressively scale appearance in the air 

combined with finely balanced flying 

qualities. 

The moulded Arcel fuselage, wing and tail 

panels are produced from metal moulds. 

Plastic screws are used to attach the 

individual components, which means that 

the glider can be dismantled for ease of 

transport. 

The model is very highly pre-fabricated, with 

all servos factory-fitted, making it very 

simple to complete. This set includes a 

complete four-channel 2.4 GHz radio 

control system, battery and charger. 

 

Set contents 

• Arcel fuselage with central reinforcing tube 

and pre-fitted landing skid 

• Injection-moulded fuselage nose with 

integral motor mount 

• Factory-fitted brushless electric motor with 

wired electronic speed controller, folding 

propeller and spinner fitted 

• Pre-installed servos and linkages for 

rudder and elevator 

• Ready-made Arcel canopy with ABS cover 

and magnet latch 

• Arcel wing panels with integral joiner 

system and main spars, two aileron servos, 

hinged ailerons, ready to use 

• Ready-made profiled Arcel tail panels with 

hinged control surfaces and horns fitted 

• Replaceable fuselage nose (spinner cap) 

for use as glider 

• 2S1P 7.4V 1050 mAh LiPo battery 

• LiPo charger with balancer function 

• 2.4 GHz four-channel radio control system 

and receiver 


• Comprehensive illustrated operating 

instructions 



2050 mm 


1020 mm 




750 g 

RC functions 

Rudder, aileron, elevator, motor control 



8x 8005 







1x 4865 

Stabiliser set ASW 15 1x 31950003 

Propeller set ASW 15 1x 31950004 

Wings set ASW 15 1x 31950005 

Fuselage ASW 15 1x 31950006 

Decal set ASW 15 1x 31950007 

Canopy ASW 15 1x 31950008 

Glider spinner, distance ring ASW 15 

1x 31950010 

Alu middle part 3,00mm 1x 31950011 

 

 

 

 

 

NN13

You have a race! 

NN14 

Illustration depicts an assembled model.

Mustang Nano-Racer 

No. 2520 

Semi-scale model of the fast 

air-racer 

The full-size: 

The P-51 was originally developed as a 

fighter aircraft. The aeroplane‘s wingspan 

was 11.2 m, and it was powered by a 1695 

BHP piston engine, giving it a top speed of 

703 km/hr. The Royal Air Force first 

assigned the supplementary name Mustang 

to the P-51, as it was significantly faster than 

the P-40. The main advantages of the 

Mustang over other aircraft were its great 

range, high speed and manoeuvrability at 

great altitudes. 

The model: 

The sleek P-51 Mustang in the robbe 

Nano-Racer series is a genuine racer with a 

licence to win. Considerable investment has 

been made in high-quality CNC-machined 

aluminium moulds to ensure that a light, 

strong, one-piece airframe can be produced 

consisting of fuselage and wing. The elegant 

fuselage offers ample space to house all the 

essential power system and RC system 

components. Additional strength comes from 

the integral CFRP wing spars. For this 

reason the model safely withstands any 

diving and pull-out manoeuvre as well as all 

aerobatic manoeuvres. The Mustang is an 

excellent machine for pylon-racing. 

 

Set contents 

• Set of painted foam components with 

decals applied (fuselage / wing, fin, 

tailplane, fuselage hatch incl. cockpit) 

• Painted plastic cowl 

• Brushless motor and speed controller 

installed 

• 5.5 x 4.5“ propeller, spinner and driver 

• 3 x servos installed 

• 3S / 850 mAh 20C LiPo battery with CT 2 

connector contacts 

• Multi-lingual assembly instructions 



650 mm 


580 mm 




320 g 

Power system 

Electric motor 

RC functions 

Elevator, aileron, motor control 


FF-6 (T6EXP) R617 2.4 GHz 6/7/0 1x F4069 


CT 2 charge lead 1x 8254 


LiPo battery, 3S 11.1 V 850 mAh 20C 

1x 25360004 


1x F1291 

ROXXY ® Bl Control 918 1x 8628 

ROXXY ® Bl Outrunner 2826/09 1x 4952 

Accessory ROXXY ® Bl-Outr. D28 1x 4794 

Propeller 5,5X 4,5 APC Speed 

1x 77835545 

 

 

 

 

 

NN15


NN16 


Rare Bear Nano-Racer 

No. 2521 


air-racer 

The full-size 

The Rare Bear was originally a naval 

interceptor. Its radial engine generated 2100 

BHP, giving it a top speed of 678 km/hr. The 

civilian machine first flew as an air-racer in 

1946 in the National Air Races held in Cleveland. 

The model 

For our model we exaggerated the pugnacious 

fuselage in order to emphasise the Rare 

Bear‘s distinctive appearance. The Rare 

Bear is a compact model weighing just 350 

g. Using modern lightweight foam technology 

we were able to produce a lightweight, 

very robust airframe, based on a one-piece 

wing and fuselage. An integral CFRP wing 

spar provides additional airframe strength. 

The model is supplied pre-painted and with 

fine decals applied as standard. 

 

Set contents 






installed 








610 mm 


560 mm 




350 g 

Power system 


RC functions 

Elevator, Aileron, Motor control 


FF-6 (T6EXP) R617 2.4 GHz 6/7/0 1x F4069 





1x 25360004 


1x F1291 




Propeller 5,5X 4,5 APC Speed 

1x 77835545 

 

 

 

 

 

NN17


NN18 


AT-6 Texan Nano-Racer 

No. 2522 


air-racer 

The full-size 

The AT-6 can trace its origins back to the 

T-6, which first flew in prototype form in 

1935. The AT-6 served as a single-engined 

trainer for US Navy fighter pilots. The 

machine‘s maximum speed was around 335 

km/hr. Today the AT-6 Texan is a very 

popular aircraft at Air Days and the Reno Air 

Race. 

The model 

In model form the AT-6 also cuts a fine 

figure. The AT-6 Nano-Racer boasts a 

realistic scale appearance in the air thanks 

to its distinctive canopy, and the relatively 

large wingspan compared with the fuselage 

length. The large wing area makes the AT-6 

a trainer with good handling for its size as 

well as an excellent racer. The model is 

based on a one-piece foam moulding 

incorporating fuselage and wings. The wing 

features a carbon fibre spar for additional 

strength, making it an excellent choice both 

for racing and aerobatics. 

 

Set contents 






installed 








720 mm 


550 mm 




340 g 

Power system 


RC functions 

Elevator, aileron, motor control 


FF-6 (T6EXP) R617 2.4 GHz 6/7/0 1x F4069 





1x 25360004 


1x F1291 




Propeller 5,5X 4,5 APC Speed 1x 77835545 

 

 

 

 

 

NN19

NN20 


Hawk RA Nano-Jet ARF 

No. 2549 

Semi-scale model of the combat 

jet trainer. 

The full-size 

The first Hawk aircraft were commissioned 

in the Royal Air Force in 1976. The type was 

employed as jet-trainer for training jet pilots 

in aerial combat and bomb attack tasks. The 

Hawk‘s excellent flying qualities and good 

manoeuvrability soon made it the ideal 

trainer. 

The model 

The finely detailed jet consists of moulded 

Styrofoam components, and its distinctive 

bright red colour scheme represents the 

version flown by the famed „Red Arrows“ 

aerobatic team. The major components are 

factory-painted, with all decals applied, 

making assembly very simple. The servos, 

fan unit with brushless outrunner motor and 

speed controller are already installed, ready 

for use. 

 

Set contents 

• Styrofoam parts set, decals applied 

• Factory-fitted servos, fan unit with BL 

motor, speed controller and horns 

• Pre-bonded cockpit with coloured dummy 

pilots installed 

• 1 x 3S 850 mAh 20C LiPo battery fitted 

with CT 2 connectors 

• Illustrated assembly instructions 



590 mm 


700 mm 




330 g 

RC functions 

Aileron, elevator, motor control 


FF-6 (T6EXP) R617 2.4 GHz 6/7/0 1x F4069 





1x 25360004 

Nano-Jet BL motor 1x 25360001 

Nano-Jet BL controller 1x 25360002 

Nano-Jet fan unit 1x 25360003 

Nano-Jet control surface linkage set 

1x 25360005 


 

 

 

 

 

NN21

NN22 


MiG-15 Nano-Jet ARF 

No. 2550 

Semi-scale model of the Soviet 

fighter aircraft. 

The full-size 

In less than two years Mikoyan Gurevich 

developed the MiG-15, the standard Soviet 

fighter aircraft of the 1950‘s. The MiG was 

assigned the NATO code-name „Fagot“, and 

the first units were supplied to the air force in 

1948. The aircraft‘s first serious operational 

missions were carried out in the Korean War, 

where it was the counterpart to the American 

F-86 Sabre. In this role the MiG-15 proved to 

be extremely versatile. The machine was 

employed as an interceptor, fighter-bomber 

and aerial combat fighter against enemy 

aircraft. 

The model 

As with all robbe Nano-Jets our model 

accurately emulates the characteristic 

appearance of the full-size. One outstanding 

feature is the detailed surfaces including 

panel-lines, which simulate those of the 

original machine. The model‘s streamlined 

air intake ensures an efficient airflow to the 

fan unit. 

The MiG-15 Nano-Jet is a classic which will 

delight many modellers. 

 

Set contents 



motor, controller and horns 

• Pre-bonded cockpit canopy with coloured 

dummy pilot installed 

• 1 x 3S 950 mAh 20C LiPo battery with CT 

2 connectors attached 




650 mm 


650 mm 




350 g 

RC functions 



FF-6 (T6EXP) R617 2.4 GHz 6/7/0 1x F4069 




LiPo battery 3S, 11.1 V 950 mAh 20C 

1x 25360006 





1x 25360005 


 

 

 

 

 

NN23

NN24 


T-33 Nano-Jet ARF 

No. 2551 

Semi-scale model of the „Shooting 

Star“ 

The full-size 

The T-33 „Shooting Star“ - better known 

under its nickname of „T-Bird“ (due to the 

wings sticking straight out from the fuselage) 

- was developed as a two-seater version of 

the F-80 fighter-bomber. The T-33 first flew 

back in 1948. In addition to its role as trainer 

for young combat jet pilots, the T-Bird was 

adopted by smaller airforces as a light attack 

or reconnaissance aircraft. 

The model 

The moulded foam components of the model 

T-33 feature excellent surface detail based 

on the full-size, incorporating all panel lines, 

maintenance hatches and many other 

details. All servos, the fan unit, the brushless 

motor and the speed controller are factoryinstalled 

in the airframe components. The 

major components are supplied with 

coloured decals applied; all you have to do 

is glue them together. 

 

Set contents 



motor, speed controller and horns 

• Pre-bonded cockpit with coloured dummy 

pilot installed 

• 1 x 3S 850 mAh 20C LiPo battery fitted 

with CT 2 connectors 




780 mm 


680 mm 




380 g 

RC functions 



FF-6 (T6EXP) R617 2.4 GHz 6/7/0 1x F4069 





1x 25360004 





1x 25360005 


 

 

 

 

 

NN25

NN26 


Vector Jet 

No. 2544 

Fast sport jet with 4S EDF 

power system. 

Vector - the powered arrow from robbe! 

The robbe Vector is free of all scale 

restrictions, and is optimised for uncompromisingly 

superb aerodynamics. Form follows 

function, and nothing else. 

The robbe Vector flies just as it looks: jetting 

across the flying field, straight as a die. At 

the same time it always responds precisely 

to the sticks without feeling twitchy. The 

servo-operated rudder provides full control 

for accurate rolls as well as extended 

knife-edge passes. 

In the engine room there is a factory-fitted 

brushless fan unit, powered by an optional 

4S LiPo battery. The power unit can breathe 

freely due to the functional layout, and the 

net result is ample thrust in all flight 

attitudes. Two vertical upward rolls from level 

flight Yes, please! Pull out of the reversal, 

then fast as a bullet down the strip at 

breath-taking speed before boring a hole in 

the sun, heading for the next galaxy. 

With such thrust available, hand-launching is 

a simple exercise - even without an assistant. 

Full-throttle, a gentle push from a 

standing start - and the robbe Vector is 

straight up there, boring holes in the sky. 

The high-grip landing skid provides a firm 

hand-hold for launching, and also protects 

the Vector from landing damage. 

Rock-solid in the air, shouldering aside all 

turbulence. The speed range is enormous: a 

measured 50 to 160 km/hr with the standard 

power system - now that‘s really moving! At 

the same time the robbe Vector is docile at 

low speed, is always fully controllable, and 

touches down gently on the strip for a 

smooth landing. 

 

Set contents 

• Fine-grain Styrofoam fuselage, wings and 

tail 

• All airframe components pre-painted, with 

decals applied 

• Painted cockpit with clear canopy, dummy 

pilot and magnet latch 

• five 9 g servos installed 

• 26-size 4S BL outrunner motor 

• Replaceable 64 mm Ø 5-blade fan already 

installed 

• 50 A BL controller with heat-sink 

• Clear aileron servo well covers 

• Control surface horns and linkages 

• Small items including grip area for 

hand-launching, CFRP wing joiner rod, 

screws and washers 

• Multi-lingual illustrated assembly instructions 



750 mm 


900 mm 




840 g 

RC functions 

Elevator, aileron, rudder, motor control 


FF-6 (T6EXP) R617 2.4 GHz 6/7/0 1x F4069 



1x 4873 

CT-4 male + female 1 pair 1x 4048 


Vector fuselage and motor hatch 

1x 25440001 

Vector wing panels and accessories 

1x 25440002 

Vector tail set 1x 25440003 

Vector canopy 1x 25440004 

Vector BL motor 1x 25440005 

Vector fan unit 1x 25440006 

Vector BL controller, 50 A 1x 25440007 

Vector control surface linkage parts 

1x 25440008 

 

 

 

NN27

NN28 

The illustration shows the model assembled, with decals applied and additional accessories fitted.

ASW 17 all-GRP fuselage + tail set 

No. 2524 

The full-size 

The ASW 17 is a high-performance GRP 

glider. Designed in 1971 as a cantilever 

shoulder-wing machine, it still ranks as a 

high-performance sailplane today, with a 

glide angle of 1 : 48 and a maximum speed 

of 250 km/hr. 

The model 

Another all-GRP semi-scale glider fuselage 

kit of modular construction. The ASW 17 

fuselage represents an ultra-simple method 

of producing an ideal glider for slope or 

thermal flying, just by fitting a set of modular 

wings which you may already own. 

 



4150 mm 


1890 mm 




6500 g 

RC functions 

Elevator, rudder, aileron, camber changing 

flaps, tow-release, landing flaps 


FX-30 + R6014 2.4 GHz 1x F8050 

S 3170 G servo 

1x F1619 

Servo S 3050 Digital 

1x F1328 

Brushless motor gondola for scale fuselages. 

1x 2513 

Fuselage wiring set 1x 4661 

Wing wiring set 1x 4662 

Easy-Start aircraft take-off dolly 1x 2519 

Wing protective bags right and left 

1x 25120001 


Rhön modular wing pair epoxy-glass 4 

flaps. 1x 2512 

ASW 17 all-GRP winglets, pair 1x 25240001 


7x F1330 


1x F1329 

Set contents 

• GRP fuselage 

• GRP tail set 

 

• Vacuum-moulded canopy, machinetrimmed 

 

• 

 

GRP canopy frame and seat shell 

• Laser-cut wooden RC installation set 

including undercarriage support 

• Factory-fitted aero-tow mechanism 

• U-Pat wing retainer system 

• 12 mm Ø wing joiner rod 

• RC fittings set 

• Illustrated building instructions 

NN29

Tip 

Flybarless - now even for the 

beginner 

NN30 

Arrow Plus -Flybarless- RTF 2.4GHz 

No. S2518 

Single-rotor flybarless helicopter 

with 2.4 GHz remote 

control system 

Increased flight times and more performance 

- these are the advantages of the Flybarless 

rotorhead technology, now that is applied in 

this new robbe Single-Rotor Helicopter. The 

Arrow Plus -Flybarless narrows the gap 

between the pure beginners helicopter and a 

„grown-up“ model helicopter. 

The Flybarless-Rotorhead technology also is 

applied now in a Single-Rotor-Helicopter, is 

the logical further development of the 

beginner‘s model helicopter range and no 

longer reserved for the High-End-Models. 

High quality components, such as the 

Metal-Rotorhead and a 2.4-GHz-radio 

control system with LCD-Display feature in 

the new robbe-Model. A three axis gyro 

stabilises the complete system in flight. 

Therefore, this helicopter can be highly 

recommended for all beginner and intermediate 

heli-pilots. The comprehensive 

package contains everything you need to 

make a successful start in model helicopter 

flying. 

 

Set contents 

• Completely factory-assembled Flybarless 

electric helicopter, set up and ready to fly 

• Swash-plate, blade grips and rotor head 

made of anodised aluminium 

• Multi coloured painted plastic trainer 

canopy 

• Carbon vertical and horizontal tail fins 

• Carbon/aluminium boom supports 

• Aluminium landing skid 

• Aluminium tailboom 

• Rigid drive to three-blade tail rotor 

• Main rotor motor 370 SH 

• Tail rotor motor 1225 FE33 

• LiPo battery 7.4 V 1000 mAh 10C with 

polarity protected connectors 

• Mains charger 15V 850mA 

• Installed airborne electronics such as 

servos, head speed governor, receiver 

• 3 axis flybarless gyro 

• XS-4 LCD Pro 4-channel 2.4 GHz transmitter 

(set up for Mode 2) 

• adjustable Beginner Mode in transmitter 

• 2 replacement rotor blades 

• Comprehensive operating and flying 

instructions 


Main rotor diameter approx. 

Tail rotor diameter approx. 


Height approx. 


RC functions 

Pitch-axis, roll-axis, yaw, climb/descent 

440 mm 

94 mm 

425 mm 

150 mm 

275 g 



 

 

 

 

 

 

 

 

NN31

NN32 

T-REX 100 Combo 

No. KX022001 

Nimble mini-sized single-rotor 

indoor helicopter incorporating 

2.4 GHz RC technology 

Align now conquers the beginners‘ class of 

model helicopter flying with the T-REX 100. 

The new ‚kid brother‘ in the T-REX family is 

built to the usual high standards, and the 

RTF model is supplied with a high-quality 

2.4 GHz four-channel RC system already 

installed. 

The radio control system can be operated 

with AA-size dry cells or NiMH rechargeable 

cells. If you opt for rechargeable cells, these 

can be recharged from a computer using the 

integral mini-USB socket, or using a 

plug-type mains charger. The T-REX 100 

flight batteries, which provide flight times of 

up to six minutes, can also be recharged 

using a special socket in the transmitter. 

A particular highlight of the RC system is the 

simple method of switching the stick mode 

from Mode 1 to Mode 2 and even Mode 3. 

 

Set contents 

• Single-rotor helicopter, completely 

assembled and set up ready to fly 

• 2-blade tail rotor with separate electric 

motor 

• Multi-colour plastic canopy 

• Micro-electric motor for main rotor 

• Single-cell LiPo battery for flight times of 

up to six minutes- 

• Compact electronic control unit 

• 2.4 GHz LCD transmitter,can be converted 

to Mode 1, 2 or 3 

• Comprehensive operating and flying 

instructions 






RC functions 

Pitch-axis, roll-axis, yaw, climb/descent 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

190 mm 

230 mm 

90 mm 

30 g 

 

 

NN33

NN34 


T-REX 500 ESP Superior Combo 

No. KX017011 

The new T-Rex 500 ESP Superior Combo 

impresses with its simple, weight optimised 

Design and excellent impression in flight 

Very large 3D Performance pitch movements 

are available for the ambitious 3-D 

Pilots. Using an extremely torsionally stiff 

chassis, the rigid tail-drive and a 

flying weight of only 1.7 kg, the committed 

3D flyer is able to fly the most extreme of 

manoeuvres. Even with a light crash, the 

chassis should survive without significant 

damage. 

Features 

• HR3 120 degree CCPM swash-plate 

• Torque tube tail drive 

• direct swashplate linkages 

• autorotation freewheel/driven tail-rotor 

• hollow 8 mm main shaft 

• single stage loss free main gear 

• main rotor ratio 1:12.46 

• tail rotor ratio 1:4.68 gives excellent tail 

rotor control authority 

• multi-colour epoxy canopy 

• CNC machined aluminium main rotor head 

hub 

• black carbon sheet side-frames 

• Carbon Tail rotor-blades 

• unlimited 3D capability 

 

Set contents 

• All of the necessary mechanical parts in a 

ready-to-assemble form 

• All small parts required for RC installation 

• ready-to-fit, adjustable push-rods 

• robust skid landing gear 

• All parts clearly sorted and pre-assembled 

for each building stage 

• detailed multi-lingual assembly instructions 

with exploded diagrams 

• 3 x DS519 digital swashplate servos 

• 1 x DS529 digital tail rotor servo 

• 1x 70A Brushless controller 

• 1 GP780 gyro 

• carbon main and tail rotor blades 


 

No. KX017011RO 

The robbe roxxy ® BL-Control 9100-6 

(No.8635) and the Programmer V2 

(No.8642) will replace the Align BL-controller 

70 A used previously in the above model 

with immediate effect. 







RC functions 

Roll-axis, pitch-axis, tail rotor, collective 

pitch, motor control 

970 mm 

200 mm 

840 mm 

310 mm 

1700 g 


T8FG-R6108SB 2.4 GHz LiPo Uni-Mode 

 

1x F7036 

Adjustment gauge pitch 15 degree 

1x S1304 

Recommended accessories power 

operation 

Servo S 3116 Micro Speed 1x F1385 

GY520 SMM gyro 

1x F1244 

ROXXY ® -Power ZX 3S 2200 mAh 25C 

2x 4872 

Power Peak ® C8 EQ-BID 1x 8553 

Recommended high-performance accessory 

Servo S 9257 

1x F1399 


1x F1244 


1x 4876 


 

 

 

 

 

 

 

 

 

 

 

NN35

NN36 


T-REX 500 ESP 3G 

No. KX017012 

T-REX 500 ESP 3G - 3D-Heli 

with Align 3G Flybarless-System 

The new T-Rex 500 ESP 3G impresses with 

its simple, weight optimised design and 

excellent impression in flight. Very large 3D 

performance pitch movements are available 

for the ambitious 3-D Pilots. Using an 

extremely torsionally stiff chassis, the rigid 

tail-drive and a flying weight of only 1.7 kg, 

the committed 3D flyer is able to fly the most 

extreme of manoeuvres. Even with a light 

crash, the chassis should survive without 

significant damage. Kit contents includes the 

Align 3G Flybarless-System 

Features 

• HR3 120 degree CCPM swash-plate 

• Torque tube tail drive 

• direct swashplate linkages 

• autorotation freewheel/driven tail-rotor 

• hollow 8mm main shaft 

• single stage loss free main gear 


• tail rotor ratio 1:4.68 gives excellent tail 

rotor control authority 

• multi-colour epoxy canopy 

• CNC machined aluminium main rotor head 

hub 


• Carbon Tail rotor-blades 


Set contents 

• All mechanical components required to 

build the model in ready-to-fit form 

• All small items required to install the 

receiving system 

• Adjustable linkage pushrods, ready to fit 

• Strong skid landing gear 

• All components clearly sorted according to 

stage of construction, some pre-assembled 

• Comprehensive multi-lingual building 

instructions including exploded drawings 

• 3 x DS510 digital servos for swashplate 

• 1 x DS520 digital servo for tail rotor 

• 1 x 70 A BL speed controller 

• 1 x 500 M BL motor 

• 1 x 3G flybarless system 

• CFRP main and tail rotor blades 

T-REX 500 ESP 3G No. KX017012RO 












RC functions 



970 mm 

200 mm 

840 mm 

310 mm 

1700 g 



 

1x F7036 


1x S1304 


operation 

Servo S 3116 Micro Speed 1x F1385 


1x F1244 


2x 4872 



Servo S 9257 

1x F1399 


1x F1244 


1x 4876 


 

 

 

 

 

 

 

 

 

 

NN37

NN38 


T-REX 550E 3G Combo 

No. KX021002 

The T-REX 550E 3G Combo is the latest 

development from Align. The new model 

comes in a totally new size. The stylish black 

anodised metal parts, the extremely high 

performance electric motor and the Align 3G 

Flybarless System make this exceptional 

helicopter stand out from the crowd. 

Model features 

• HR3-swashplate 120˚ 

• New aerodynamically efficient design of the 

main rotor controls for increased control 

precision 

• New, very light and robust main gearing 

• New torsionally stiff main rotor bearing 

block 

• Integrated swashplate guide and gyro 

platform mount 

• Various installation possibilities for speed 

controller mounting platform 

• Rigid tail rotor drive 

• Rugged 21.5 mm tail boom from the T-REX 

600 range 

• New, secure tail servo mounting located in 

the sideframes 

• High speed bearings fitted to tail rotor 

blade grips. 

• Very efficient rigid drive 

• Direct swashplate linkage 

• Autorotation unit/driven tailrotor 

• single-stage, low-loss gearbox 

• Main rotorblade length 520 mm 

• Motor pinion with 16 teeth 

• Main gear with 170 teeth 

• autorotation drive gear with 180 teeth 


 







• Tail drive gear with 40 teeth 

• Weight without battery 1970 g 


• Tail rotor ratio 1:4.5 gives excellent tail rotor 

control authority 

• multi-colour painted epoxy canopy 

• CNC machined alloy main rotor head hub 


• Carbon main and tail rotorblades 


Set contents 




• Ready-to-fit, adjustable push-rods 

• Robust skid landing gear 



• Detailed multi-lingual assembly instructions 


• 3x DS610 digital swashplate servos 

• 1x DS620 Digital tail servo 

• 1x 70A BL controller 

• 1x BL Motor 600 M 

• 1x 3G Flybarless-System 








RC functions 

Pitch-axis, roll-axis, tail rotor, collective 


1188 mm 

254 mm 

1042 mm 

364 mm 

2800 g 



1x F7036 

ROXXY ® -Power ZY 6S 4500 mAh 30C 

1x 6822 


1x S1304 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NN39

NN40 


T-REX 550E Combo 

No. KX021005 

The T-REX 550E Combo is the latest 

development from Align. The new model 

comes in a totally new size. The stylish black 

anodised metal parts and the extremely high 

performance electric motor make this 

exceptional helicopter stand out from the 

crowd. 


• HR3-swashplate 120˚ 

• New aerodynamically efficient design of the 

main rotor controls for increased control 

precision 

• New, very light and robust main gearing 

• New torsionally stiff main rotor bearing 

block 

• Integrated swashplate guide and gyro 

platform mount 

• Various installation possibilities for speed 

controller mounting platform 

• Rigid tail rotor drive 

• Rugged 21.5 mm tail boom from the T-REX 

600 range 

• New, secure tail servo mounting located in 

the sideframes 

• High speed bearings fitted to tail rotor 

blade grips. 

• Very efficient rigid drive 

• Direct swashplate linkage 

• Autorotation unit/driven tailrotor 

• single-stage, low-loss gearbox 

• Main rotorblade length 520 mm 

• Motor pinion with 16 teeth 

• Main gear with 170 teeth 

• autorotation drive gear with 180 teeth 

T-REX 550E Combo 

 







 

• Tail drive gear with 40 teeth 

• Weight without battery 1970 g 

• Main rotor ratio 1:10.62 

• Tail rotor ratio 1:4.5 gives excellent tail rotor 

control authority 

• multi-colour painted epoxy canopy 

• CNC machined alloy main rotor head hub 




Set contents 




• Rready-to-fit, adjustable push-rods 

• Robust skid landing gear 



• Detailed multi-lingual assembly instructions 


• 3 x DS610 digital swashplate servos 

• 1 x DS620 digital tailrotor servo 

• 1 GP 780 gyro 

• 1 x 70A BL controller 

• 1 x BL Motor 600M 

• Carbon main and tail rotor blades 

 







RC functions 



1188 mm 

254 mm 

1042 mm 

374 mm 

2900 g 



1x F7036 


1x 6822 

Adjustment gauge pitch 15 degree 1x S1304 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NN41

NN42 




black 

No. KX016013 


blue 

No. KX016014 

 

Fully upgraded version with 

colour-matched aluminium 

parts and all electronic components. 

The outstanding features of the new T-Rex 

600 ESP Superior Combo are its simple, 

lightweight design and excellent appearance 

in flight. Very large collective pitch travels 

are available for the ambitious 3D pilot, 

offering genuine 3D performance. With a 

combination of a chassis offering extreme 

torsional rigidity, a rigid tail rotor drive 

system and a take-off weight of just 3300 g, 

the model gives the keen 3D pilot the 

opportunity to fly the most extreme of 

manoeuvres. The chassis is perfectly 

capable of surviving even a light crash 

without major damage. 

Model features: 

• HR3 120˚ rotor head linkage 

• Rigid tail rotor drive system 

• Push-pull swashplate control system 

• Auto-rotation freewheel / driven tail rotor 

• Tubular 10 mm main rotor shaft 

• Single-stage, low-loss gearbox 

• Main transmission reduction ratio 1: 12, 14 

or 1: 11.33 

• Tail rotor reduction ratio 1: 4.5 for excellent 

tail rotor response 

• Painted, multi-colour GRP canopy 

• CNC-machined aluminium rotor head hub 

• Black carbon sheet side frames 

• CFRP tail rotor blades 

• Unlimited 3D capability 

 

 

Set contents 

• All mechanical parts required to build the 

model, in ready-to-fit form 

• All small items required to install the 

receiving system 

• Adjustable control system pushrods, ready 

to install 

• Rugged skid landing gear 

• All kit components clearly sorted according 

to stage of contruction, many pre-assembled 

• Comprehensive multi-lingual building 

instructions with exploded drawings 

• 3 x DS610 digital servos for swashplate 

• 1 x DS620 digital servo for tail rotor 

• 1 x 100A BL speed controller 

• 1 x 600 M BL motor 

• 1 x GP 780 gyro 

• Receiver power supply 

• Regulator with LiPo battery 

• CFRP main and tail rotor blades 


black 



blue 





100 A used previously in all the above 

models with immediate effect. 

 







RC functions 



1350 mm 

240 mm 

1160 mm 

400 mm 

3300 g 


T8FG-R6008HS 2.4 GHz FASST 1x F7035 


1x 6822 



1x S1304 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NN43

NN44 


T-Rex 700E 

T-REX 700E 3G Super Combo 

 

No. KX018E01 


 

No. KX018E04 

T-REX 700E Combo No. KX018E05 

 

The T-REX 700 E 3G Combo marks the 

systematic development of the 700 electroclass 

from Align. The silver anodised metal 

parts and the extremely high performance 

electric motor make this exceptional 

helicopter stand out from the crowd, as well 

as the 3G Flybarless System included in the 

box. Furthermore, Align has treated the 

newcomer to a new Castle Creations 120A 

Brushless speed controller that completes 

the performance package of this exceptional 

helicopter. 


• Impressive flight performance by means of 

its simple and weight-optimised design 

• High quality CNC-milled, silver anodised 

main rotor head 

• High quality metal servo arms for extremely 

high precision control linkages 

• Innovative battery compartment for quick 

change and good protection of the flight 

battery 

• Top mounted motor, close to the longtitudinal 

axis to give the optimum centre of 

gravity and excellent cooling 

• Three motor mounts for an exact guidance 

of the driveshaft and smoother running 

• CNC machined module1 main gear for 

optimum power transmission and quiet 

running 

• Top mounted speed controller platform for 

excellent cooling of the Brushless speed 

controller 

• 3D-capable with a pitch range of +/-15˚ 

• Heavy duty tail rotor with axial bearings 

• Front mounted tailrotor servo to improve 

centre of gravity positioning 

• Rigid tail rotor drive for excellent performance 

• Carbon tailboom 

• Elaborately painted, high gloss epoxy 

canopy 

• Rugged main frame designed for extreme 

loads 

• New autorotation unit laid out for high 

torque 

 

Set contents 

1x T-REX 700E F3C Kit 

1x Aluminium tailboom 

1x Carbon tailboom 

1x Carbon main blades 690D 

1x Brushless-Motor 700MX (510 KV) 

1x 3G Flybarless System 

3x Swashplate servos DS610 

1x Tailrotor servo DS650 

1x Carbon tailrotor blades 105 mm 

1x Castle Creations ICE HV 120A speed 

controller 

1x 6A External BEC with 5.1V Step-Down 

Voltage Regulator 

Contents No. KX018E04 as No. KX018E01, 

but without 

1 x Castle Creations ICE HV 120A speed 

controller 

Contents No. KX018E05 as No. KX018E01, 

but with 

1 x GP 780gyro 

and without 

1 x 3G flybarless system 

1 x Castle Creations ICE HV 120A speed controller 







RC functions 


pitch, motor speed 

1562 mm 

281 mm 

1328 mm 

408 mm 

4700 g 



1x S1304 

Align 3G USB programmer 1x HEP3GF02 

Recommended accessories No. KX018E04/ 

E05 

ROXXY ® Bl Control 9120-12 Opto 1x 8641 


operation 


1x F7036 

LiPo battery 2S1P 7.4V 1900 mAh/40C 

 

1x HBP19001 

Equalizer-adaptor robbe-JST XH 2x 8214 

LiPo battery 6S2P 22.2V 5200 mAh/40C/A 

 

2x HBP52001 


Power Peak ® I4 EQ-BID 1x 8507 

CT-4 charging lead 1x 4059 

Receiver charge lead Bec 

1x F1418 

SPS 15V/40A switch-mode mains PSU 1x 8539 


T-12 FG + R6014 FS 2.4 GHz 1x F8066 


1x 4874 

CT-2 connector male + female 1 pair 

1x 4077 


1x 6833 


Power Peak ® Eternity 1x 8471 



SPS 15V/40A switch-mode mains PSU 1x 8539 

 

 

 

 

NN45

NN46 


T-REX 700E F3C Super Combo 

No. KX018E06 

After a successful testing 

programme, we proudly present 

the T-REX 700E F3C. 

This has been developed specifically for 

F3C competition work. A series of new 

developments and design changes now 

provide marked improvements in flying 

characteristics in terms of stability and 

control. 


• 700-size helicopter specially developed to 

satisfy the requirements of the F3C 

schedule 

• High-quality CNC-machined, silver 

anodised main rotor head with modified 

linkage geometry 

• New, high-quality paddles, revised for F3C 

requirements 

• High-quality metal servo arms for extremely 

precise control linkages 

• Innovative battery compartment allows 

rapid battery changes and provides good 

protection to the flight battery 

• High-mounted motor, close to the vertical 

axis for optimum Centre of Gravity and 

excellent cooling 

• Three motor bearings for improved 

drive-shaft support and smoother running 

• CNC-machined helical-cut modulus-1 main 

gear for optimum power transmission and 

quiet running 

• High-mounted speed controller platform for 

efficient cooling of the brushlessspeed 

controller 

• F3C-capable with a pitch range of +/-12˚ 

• Heavy-duty tail rotor with axial bearings 

• New 5mm carbon tail rotor linkage for 

precise tail control 

• Carbon-reinforced roll linkage and flybar 

• Aluminium elevator and tail totor servos 

mounts for a direct, more precise linkage 

• Rigid tail rotor drive system for superb 

performance 

• High-gloss GRP canopy with sophisticated 

colour scheme 

• Rugged main frame designed to cope with 

extreme loads 

• Extra-large stabiliser panels for good 

stability in forward flight 

• New freewheel designed for high torque 

 

Set contents 

1 x T-REX 700E F3C kit 

1x Aluminium tail boom 

1x CFRP tail boom 

1x 700 F3C CFRP main blades 

1x 700MX brushless motor (470 KV) 

1x GP780 gyro 

3x DS610 swashplate servos 

1x DS650 tail rotor servo 

1x 105 mm CFRP tail rotor blades 

1x Castle Creations ICE HV 120A speed 

controller 

1x 6A external BEC unit with 5.1 V stepdown 

voltage regulator 







1582 mm 

281 mm 

1343 mm 

424 mm 

5200 g 

RC functions 




Adjustment gauge pitch 15 degree 1x S1304 


operation 


 

1x F7036 

LiPo battery 2S1P 7.4V 1900 mAh/40C 

 

1x HBP19001 

Equalizer-adaptor robbe-JST XH 2x 8214 

LiPo battery 6S2P 22.2V 5200 mAh/40C/A 

 

2x HBP52001 


Power Peak ® I4 EQ-BID 1x 8507 



SPS 15V/40A switch-mode mains PSU 

1x 8539 


T-12 FG + R6014 FS 2.4 GHz 1x F8066 


1x 4874 

CT-2 connector male + female 1 pair 

1x 4077 


1x 6833 


Power Peak ® Eternity 1x 8471 




1x 8539 

 

 

 

 

 

 

 

 

 

 

NN47

Accessoires 

550FL main rotor head set, 

black 

No. H55069 

 

Flybarless main rotor head for the T-REX 

550E 

This new flybarless main rotor head has 

been specially produced for the T-REX 

550E. As ever, the impressive feature of this 

accessory item is its accurately made, black 

anodised aluminium parts. This rotor head is 

supplied without electronics, leaving the 

customer to decide his choice of flybarless 

system. 

700FL main rotor head, black 

 

No. HN7108QA 

700FL main rotor head, silver 

 

No. HN7108QF 

 

The renowned flybarless main rotor hub for 

the T-REX 700 is now available separately, 

i.e. without the electronic components 

otherwise bundled with it. Naturally we have 

again ensured that the aluminium parts of 

this component are of particularly high 

quality. The rotor head is available both in 

black and silver. 

 

Align FBL 3G control unit 

 

No. HEG3GF01 

 

Control unit for the well-known Align 3G 

Flybarless-System 

 

 

Align FBL 3G sensor unit 

 

No. HEG3GF02 

 

Sensor unit for the well-known Align 3G 

Flybarless-System 

 

 

NN48

Accessoires 

ALIGN battery transport 

bag No. HOC50004 

 

ALIGN battery transport bag 

Handy transport bag for various 

sizes of battery. 

 

ALIGN tool transport 

bag No. HOC50005 

 

ALIGN tool transport bag 

Transport bag for storing tools of 

all kinds. 

 

T-REX 500 transport 

bag, black No. HOC50001 





T-REX 500 transport bag, 

orange No. HOC50002 









Practical bag for transporting 

T-REX models in safety. 

 

Practical bag for transporting 

T-REX models in safety. 

 

ALIGN transmitter 

transport bag 

 

No. HOC50003 

 

ALIGN transmitter transport 

bag 

Handy transport bag for various 

sizes of hand-held transmitter. 

 

NN49

The new flagship in the robbe 

model boat range 

NN50 

The illustration shows the model assembled, painted, with decals applied and additional accessories fitted.

Sylt Police Boat No. 1194 

Accurate model of the police 

boat to a scale of 1 : 25 

The full-size 

In April 2009 the Schleswig-Holstein river 

police took delivery of the largest and most 

modern police boat produced to date. The 

boat, christened „Sylt“, was built at Berne on 

the Weser by the Fassmer dockyard, and is 

the second of four boats intended to update 

the police fleet. 

The coverage area for the 34 metre long 

„Sylt“ extends from the Danish border to the 

Elbe estuary. In addition to monitoring tasks 

in this sea area the boat‘s role includes 

fisheries surveillance and police support on 

the North Sea islands. With a top speed of 

26 knots (almost 50 kilometres per hour) the 

„Sylt“ is the fastest and most powerful boat 

in the police fleet. 

The model 

We were looking for a suitable prototype for 

a new flagship in the robbe boat range, and 

we decided on the „Sylt“. We were attracted 

by the boat‘s modern design and wide scope 

for auxiliary working systems, which are a 

characteristic feature of genuine robbe 

multi-function boats. 

The model‘s impressive size means that 

there is ample internal space for additional 

expansion. For example, the „Sylt“ builder 

can install sound and lighting systems, a 

radio-controlled crane, rotating radar, 

working anchor winch and many more 

auxiliary functions. As an option, the ship‘s 

boat can also be equipped with its own 

power and radio control systems for 

independent running. If you are particularly 

keen on high scale fidelity you can obtain an 

accurate scale version of the original 

machine by installing the contents of the 

„Sylt“ command bridge expansion set, 

complete with finely detailed control stand, 

computer screens, card-table and many 

other parts. 

With the gracious support and approval 

of Fassmer GmbH & Co. KG 

 

 

 

NN51

Set contents 

• Vacuum-moulded hull and deck in white 

ABS plastic 

• Control stand and superstructure assembled 

from white CNC-machined plastic 

sheet components 

• CNC-machined white plastic sheet 

components for installing the power system 

and electronic components 

• Complete rudder system and small parts 

set 

• Small items for assembling the model 

• Comprehensive parts set for main mast 

and railings 


• Multi-lingual building instructions and 

assembly drawings 

• Boatstand 

 

 

 

 



1200 mm 

Width approx 

250 mm 


520 mm 

Total displacement approx. 6000 g 

Scale 1:25 

RC functions 

Rudder, Motor control, Auxiliary working 

systems, Lighting systems, Sound function 


F14 4/8/1 40MHz 

1x F4039 

Transmitter battery, 8 NiMH 2000 quad. 

1x 4567 

Bow Thruster 1x 1155 


Attack ER 2/2/2 40 MHz 1x F2211 


8x 8005 

Navy Control 540 R 1x 8616 

Roxxy-Power ® ZX 4S 5000mAh 25C 

1x 4894 

Sylt power set 1x 11942000 

Sylt fittings set 1x 11941000 

Additional recommended accessory 

Sylt cabin fittings set No. 11944000 

Recommended lighting accessories 

Multi-Switch 16 modul 8084 

Multi-Switch 16 decoder memory 8369 

Sylt auxiliary function set 11943000 

Recommended sound accessories 

Multi-Switch module 8 

F1511 

Sound Module Navy 8270 

Bass Loud Speaker 8080 

Special function accessories 

Multiprop-Module 8 

1x F1512 

Multi-Prop 8 decoder 1x 8042 

Sylt auxiliary function set 1x 11943000 

Sailwinch Sw-2 1x 8371 

A complete list of recommended accessories 

is included in the technical documentation 

supplied with the model. 

NN52 

Sylt Police Boat No. 1194 

Sylt fittings set No. 11941000 

 

The compehensive fittings set contains more 

than 300 parts for detailing the model, 

including life-rafts, lifebelts, anchor, chain 

stopper, anchor chain and winch, inflatable 

boat, crane, radar, bollards, flag and many 

other items. 

 

 

 

Sylt auxiliary function set 

No. 11943000 

 

This expansion set is required if you wish to 

implement all the model‘s auxiliary working 

systems. It contains all bulbs required, 

geared motors for the crane and radar, 

power system components required for radio 

control of the ship‘s boat (speed controller, 

receiver, drive battery, and RC system 

transmitter not included), cables, connectors 

and many other small items. 

 

 

Sylt cabin fittings set No. 11944000 

 

The comprehensive cabin fittings set can be 

used to give the command bridge of the Sylt 

a scale appearance. It contains more than 

150 parts, e.g. PC and radar screens, 

control stand, rudder lever, seats, card table, 

cabinets, companionway and many other 

finely detailed components. It also includes 

CNC-machined plastic plates to support the 

interior furnishings. 

The cabin fittings set can be assembled and 

installed at any time, i.e. even after the boat 

has been finished. 

 

 

Sylt power set No. 11942000 

 

Contains two Power 755/40 electric motors, 

two stern tubes and shafts, boat propellers, 

motor couplings, small hardware items. A 

direct power transmission system is used, 

i.e. no gearbox is required. 

 

 

Bow Thruster No. 1155 

 

Rugged bow thruster set featuring a new 

high-performance wheel-type design. The 

efficient shaft seal allows also horizontal 

installation. Supplied with electric 4.8-6V 

motor, suppressor filter and hardware. 

 

 

 

NN53

Model boat accessories 

Water-cooling unit for BL 

controller 1 set No. 1750 

 

Multi-part set for fitting a water-cooling 

system to robbe-Roxxy ® BL-Control 930 to 

975-12 OPTO speed controllers, plus all 

controllers with a heat-sink approximately 25 

mm wide. 

Suitable cooling hoses: 

robbe silicone hose 2.5 Ø x 5.5 x 1000 mm 

 

No. S1401 

 

 

Aluminium rudder systemNo. 1751 

 

Rudder system for the Magin One Black RE. 

Also ideal for own-design racing boats. 

Height (rudder blade): approx. 110 mm 

Width (rudder blade): approx. 25 mm 

Supplied complete with mounting brackets, 

rudder bush and shaft, cooling water nipple 

and other small items. 1 set 

 

 

 

Shaft system and flex-shaft No. 1752 

 

Multi-part shaft system for the Magin One 

Black RE model boat. Also ideal for 

own-design racing boats. 

Diameter (shaft): 4 mm 

Length (shaft): approx. 170 mm 

Supplied complete with brackets, stainless 

ballraces and other small items. 1 set 

 

 

 

 

 

 

NN54

Model boat accessories 

Turn fin No. 1753 

 

Stainless steel turn fin for the Magin Once 

Black RE model boat. Also ideal for 

own-design racing boats. 

Supplied complete with fixings and other 

small parts. 1 set 

 

 

Brass rudder system No. 1754 

 

Brass rudder system for the Rapido RTR 

model boat. Also ideal for own-design racing 

boats. 

Height (rudder blade): approx. 40 mm 

Width (rudder blade): approx. 25 mm 

Supplied complete with rudder bush and 

shaft, tiller and other small items. 1 set 

 

 

 

NN55

NN56 

The illustration shows the model assembled, painted, with decals applied and additional accessories fitted.

E-Ei electric vehicle 

No. 2044 

Model of the electric vehicle 

designed by Höhscheid High 

School. 

The full-size 

This battery-operated single-seat electricpowered 

vehicle was developed and produced 

by pupils and their teacher at Höhscheid High 

School of Solingen, Germany. The materials 

required to build the vehicle were financed by 

monetary prizes and industrial sponsors. With 

a max. empty weight of 130 kg the E-Ei has a 

range of 60 to 150 km, depending on the 

battery used. It is capable of the typical speeds 

required by city traffic. The body shell consists 

of a self-supporting fibre-composite shell of 

sandwich construction. The rear-wheel-drive 

E-Ei is powered by a hub motor rated at 800 

Watts. School roofs and public buildings fitted 

with solar cells are to act as charging stations 

for the interchangeable batteries. 

The Vision 

By 2020 electric mobility will replace a 

proportion of the vehicles currently powered by 

internal-combustion engines. With their design 

the pupils of Höhscheid High School are 

contributing to the idea that people - and 

primarily young people - should not be content 

to fit new motors to outdated concepts, but 

should help to develop vehicles which are 

fundamentally more environmentally friendly. 

With these vehicles the emissions are not 

simply shifted from the highway to the power 

station. Due to their lightweight construction 

and low resistance they require little energy to 

move. This energy is produced by regenerative 

means. The E-EI therefore serves as a 

test-bed for various types of propulsion, battery 

and chassis. 

If you wish to find out more about this project, 

you will find plenty of additional information on 

the pupils‘ website at: www.e-ei.info. 

The robbe model 

The vision, overall design and - especially - the 

commitment of the pupils and teacher at 

Höhscheid High School made such an 

impression on us at robbe that we took the 

decision to produce a radio-controlled model of 

the E-Ei. Our model also concentrates on 

learning and experiencing physical interactions, 

plus the opportunity to experiment with 

the energy concepts of the future. 

The potential operator of the model E-Ei does 

not purchase an off-the-peg vehicle in 

Ready-to-Run form. Intead he obtains a kit with 

which he can learn the basic manual skills of 

modelling. He can - no, he should - continue 

developing our kit and enrich his E-Ei with his 

own ideas in terms of power system, driving 

characteristics and weight optimisation. All the 

while he can benefit from contact and 

exchange of information with the pupils of 

Höhscheid High School via the Internet. We 

can‘t wait to see how the E-Ei will develop in 

the future! 

A special, low-cost entry-level version of the 

E-Ei for school projects is in the pipeline. You 

can find out more about this in due course 

from our website www.robbe.com. 

 

Set contents 

• Vacuum-moulded upper and lower cabin 

sections in white ABS plastic 

• Vacuum-moulded canopy in clear ABS plastic 

• CNC / laser-cut wood former set for internal 

fittings 

• GRP front axle bearer 

• Stub axles and stub axle holders 

• Small parts for steering system 

• Rear axle rocker 

• Oil-filled rear axle rocker shock absorbers 

• Wheels and tyres 

• Brushless wheel hub motor 

• 3.5 mm Ø gold-contact plugs and sockets for 

the speed controller / battery connection 

• Small parts for assembling the model 


• Multi-lingual building instructions 



Width approx 


Weight approx. 

RC functions 

Steering, Motor control 

460 mm 

280 mm 

150 mm 

820 g 


Servo S 3115 Micro 

1x F1379 



1x 6803 


T3PM-R604GF 2,4G FHSS 1x F3033 


4x 8005 


Charge lead gold 3.5 mm, 30 cm 1x 8256 

Power Peak ® A4 EQ-LCD 230V/12V 1x 8560 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NN57

Hydraulic system 

Hydraulic pump, 13 bar No. 33360012 

 

Flow rate up to 450 ml / min according to rotational speed. Working 

pressure 13 bar. 

Operate pump using special hydraulic oil only. 

Hydraulic cylinder 15-95-45-140 No. 33360001 






 






 

All cylinders are made entirely of stainless steel. They are screwed 

together, and can be dismantled for gasket replacement 

NN58


Specification 

Order No. 

Piston 

Ø 

(K) 

Cylinder 

Ø 

(DZ) 

Outside 

Ø 

(DA) 

Retracted 

length 

(LE) 

Extended 

length 

(LA) 

Stroke 

(LA) 

Compressive 

power 

Tractive 

power 

33360001 15 mm 18 mm 20 mm 95 mm 140 mm 45 mm 14 kg 11 kg 

K 

LE 



DA 

DZ 

H 





LA 





Schematic connection diagram 

Receiver or Multi-Prop module 

Extend cylinder 

Pressure regulator 

Cylinder 

Servo 

Control valve 

Retract cylinder 

Push/Pull linkage 

IN/OUT block Return 

IN/OUT block 

IN/OUT block input 

Motor adapter 

Tank 

Return Pump 

Pump 

BL-motor 

Leakage oil 

pump 

BL speed 

controller 

Pump input 

12 V 

NN59


Single hydraulic control valve No. 33360013 

Double hydraulic control valve No. 33360014 

Triple hydraulic control valve No. 33360015 

Quadruple hydraulic control valve No. 33360016 

Quintuple hydraulic control valve No. 33360017 

 

The illustration shows the control valves with optional connector 

block and pressure regulator fitted. Multiple control valves can be 

arranged in series. 

Hydraulic pressure regulator No. 33360018 

 

Ilustration shows optional pressure regulator mounted to control 

valve 

 

Dimensions of control valves (excl. pressure regulator and inlet / 

outlet block) 

single control valve 20 x 20 x 30 mm 

double control valve 40 x 20 x 30 mm 

triple control valve 60 x 20 x 30 mm 

quadruple control valve 80 x 20 x 30 mm 

quintuple control valve 100 x 20 x 30 mm 

Push-pull linkage for one valve: 

e.g. No. S4411 M2.5 pushrod (2 x) 

e.g. No. S3081 ball-link and ball 

control valve servo: 

e.g. No. F1379 S 3115 micro-servo 

Hydrauic inlet / outlet block No. 33360019 

 

Illustration shows optional inlet / outlet block mounted on control 

valve 

NN60


Hydraulic motor adapter 

for BL 3548/06 

No. 33360025 

 

The set includes coupling 

components for connecting the 

brushless motor to the hydraulic 

pump. 

 

Hydraulic connecting 

nipple No. 33360022 

 

straight, with gasket. Pack of 5. 

Hydraulic connecting 

nipple No. 33360023 

 

angled, with gasket. Pack of 5. 

Hydraulic hose 

No. 33360020 

 

4 Ø x 2.5 x 1000 mm 

Hydraulic union nut 

No. 33360024 

 

Hydraulic oil, 500 ml 

No. 33360021 

 

Special oil for robbe model 

hydraulics. 

 

NN61

Connection technology 

FAST COINS No. 50590037 

 

Self-adhesive hook-and-loop dots. Ideal for 

retaining RC components and securing 

batteries in the model. 

Self-adhesive, black, 35 mm Ø. 

Four loop dots + four hook dots 

FAST VSTRAP HELI No. 50590038 

 

Hook-and-loop straps for securing and 

retaining batteries in model helicopters, e.g. 

robbe 4S. 

Width 16 mm, length 240 and 350 mm, 

black. Pack of 1 + 1 

FAST VSTRAP No. 50590039 

 

Hook-and-loop straps for securing and 

retaining batteries and other heavy components 

in models. 

Width 25 mm, length 300 mm, black. 

Pack of 2. 

FAST TAPE No. 50590040 

 

Self-adhesive hook-and-loop tape. Ideal for 

the modeller‘s own retention requirements in 

models and accessories, e.g. fixings in 

pit-boxes and toolboxes. Self-adhesive, 

black, 

Width 25 mm each, length 2 m each. 1 roll 

loop tape + 1 roll hook tape. 


 

Hook-and-loop strap for securing and 

attaching batteries and other heavy 

components in models. 


Pack of 1. 


 

Hook-and-loop strap for securing and 

attaching batteries and other heavy 

components in models. 


Pack of 1. 

NN62

Connection technology 

FAST BASE No. 50590043 

 

Professional base set for every modelling 

workshop. 67 hook-and-loop items for 

various fixing requirements in the workshop, 

the model and accessories. 

1 set. 

FAST STRAP No. 50590045 

 

Lengths of hook-and-loop cable tie material, 

ideal for grouping and deploying cables in 

the model. 

Black, width 10 mm, length 5 m. 1 roll. 

FAST MICRO HOOK No. 50590046 

 

Self-adhesive micro hook tape. Ideal for 

secure, large-area retention of batteries, e.g. 

in the LiPo battery safe, No. 6999. Matching 

loop tape is available under No. 50590047. 

Self-adhesive, black, width 50 mm, 

length 10 m. 1 box 

FAST VELOUR No. 50590047 

 

Self-adhesive loop tape for micro hook tape. 

Ideal for secure, large-area retention of 

batteries, e.g. in the LiPo battery safe, No. 

6999. Matching Micro hook tape is available 

under No. 50590046. 

Self-adhesive, black, width 50 mm, length 

10 m. 1 box 

NN63

NN64 

Set contents 

1 Megatech T3PL 2.4 GHz FHSS transmitter 

1 R 2004GF 2.4 GHz FHSS receiver 

1 Standard switch harness 

1 Mini-screwdriver

T3PM-R604GF 2,4G FHSS 

No. F3033 

Compact, reasonably priced 

3-channel / 4-channel computer 

pistol-grip system exploiting 2.4 

GHz Frequency Hopping transmission 

technology, designed 

for the demanding operator. 

In addition to three separate control 

channels and a method of controlling a 

fourth servo for a separate front wheel 

brake the system offers a Crawler function 

for Trials vehicles. This term refers to a mixer 

function for four-wheel steering. 

Depending on the model‘s requirements, the 

front and rear axles can be steered separately, 

together, in the same or opposite 

directions. 

Features: 

• Modern case design with ergonomically 

positioned primary and secondary controls. 

• Large 80-segment LCD screen provides a 

clear display of function settings. 

• Digital on-screen voltage display 

• Visual and audible low-voltage alarm 

• Data memory for ten models 

• Model name entry with three letters, figures 

or symbols, for differentiating between 

different models 

• Servo travel adjustment for steering, 

throttle, 3rd + 4th channels 

• Servo reverse, steering, throttle, 3rd + 4th 

channels. 

• Settings for 3rd channel: separate or brake 

channel 

• ABS intermittent brake for optimum grip 

when braking through turns 

• Digital rocker buttons for setting trims and 

Dual-Rate function, even during a race. 

• Variable Dual-Rate function for steering 

• Crawler mixer function 

• Integral charge socket for easy conversion 

to rechargeable batteries. 

• The compact R2004GF 2.4 GHz receiver 

included in the set is ideal for use in RC 

model cars and boats. 2.4 GHz technology 

makes the system virtually immune to radio 

interference and general background 

interference in model cars. 

30 channels at 1.5 MHz spacing. 

Frequency band 2404 ... 2447.5 MHz. 

28 users simultaneously. 

End-point adjustment 


Functions 

3 / 4 servos 

Frequency band 2404 ... 2447.5 MHz 

Transmitter power 

40 mW 

Aerial 

internal 

Transmission system 

FHSS 

Channel spacing 

1500 kHz 

Power supply 

4.8 - 6 Volt 

Current drain approximately 110 mA 

Dimensions 

approximately 210 x 180 x 90 mm 


600 g 

Additional technical data 

Not compatible with FASST receivers; only 

with R603GF, R2004GF, R2104GF and 

R2006GS FHSS receivers. 

Receiver R2004GF 2,4 GHz FHSS 

Frequency band 2...404,2.4475 GHz 

Spot frequencies 30 

Channel count 4 


1500 kHz 


FHSS 

Voltage 

4,8 - 6 Volt 

Current (mA) 40 

Dimensions 

39 x 26 x 12.5 mm 

Aerial length 

17 cm 


8 g 



4x 8005 

Mains charger Tx-Rx 2 x 4,8 Volt 1x 8290 


Transmitter battery charge lead 1x F1535 

Receiver battery charge lead 1x F1416 

Power Pack 4NiMH 2000 flat 1x 4551 

Transmitter Bag 

1x F9906 

Alu transmitter case racing team 1x F1555 

 

 

 

 

 

Model memories 

Servo reverse 

Receiver R2004GF 2,4 GHz FHSS 

NN65

Set contents 

1 Megatech T4PL 2.4 GHz FHSS transmitter 

1 R 2104GF 2.4 GHz FHSS receiver 

1 Standard switch harness. 

1 Mini-screwdriver 

NN66

Megatech T4PL-R2104GF 2.4 GHz FHSS 

No. F3035 

The new Megatech T4PL pistolgrip 

computer system features 

a sleek, modern design. The 

focal point of the transmitter is 

the backlit screen, which is 

located in the upper part of the 

transmitter, where it is clearly 

visible. For professional RC car 

and racing boat operators, 

exploiting 2.4 GHz FHSS technology 

with Frequency Hopping 

No more same-channel interference, virtual 

immunity to interference, and resistance to 

background interference - these are the 

main advantages of FHSS technology. 

When designing the T4PL transmitter, which 

is a completely new development, the 

various controls were arranged with 

ergonomic efficiency as top priority. All the 

controls are well positioned and easy to use. 

The system is also very light in weight at just 

550 g. 

The central control area with LCD screen 

lies in the direct line of sight of the operator, 

making it easy to read off values even during 

a race. The mixer functions are virtually 

identical to those of the proven T4PK(S) 

professional system. 

An innovation in this class of systems is the 

expansion to four control channels. The 

separate fourth channel is particularly useful 

with 1: 5 scale RC cars for controlling the 

front and rear brakes separately. 

Another new feature is the Crawler function 

for Trials vehicles. This term refers to a mixer 

function for four-wheel steering. The front 

and rear axles can be steered separately, 

together, in the same or opposite directions, 

depending on requirements. 

The Timer function has also been expanded 

by a pit-stop timer, to remind the operator to 

call in for pit-stops in good time. 

Switching from S-FHSS (High-Speed mode 

- only in conjunction with digital servos) and 

FHSS -mode. 

Forty models can be stored in the internal 

model memory, which is sufficient even for 

an extensive array of vehicles. 


Functions 

8 / 4 servos 

Frequency band 2.404... 2.4475 GHz 


90 mW 

Transmission system FHSS / S-FHSS 


1500 kHz 

Power supply Four AA-size 1.5 V dry cells 

 

5 NiMH cells, 2000 mAh 

Current drain 

approx. 220 mA 


550 g 



with R603GF, R2004GF, R2104GF and 

R2006GS FHSS receivers. 

R2104GF 2.4 GHz FHSS receiver 





1500 kHz 


Voltage 

4.8 - 7.4 Volt 

 

(4... 5 NC / NiMH or 2S LiPo) 


Dimensions 

39 x 26 x 12.5 mm 

Aerial length 

17 cm 


8 g 




Transmitter Battery 5 NiMH 2000 mAh 4/5A 

1x 4669 

Plug-type mains charger, 

Tx4-5Nx-Rx4-5NX 150mA 1x 8898 

Transmitter battery chare lead D 1,3 mm 

T4YF-T4PK 

1x F1535 


Power Pack, 5 NiMH 1400 2/3A, 

flat 1x 4582 

Alu transmitter case racing team 1x F1555 

Start display 

 

 

 

NN67

Operating area and display. 

Virtually a small cockpit. 

Charge socket and MC-Link 

connector. 

Adjustable throttle trigger lever 

and easily reached controls. 

Steering exponential function. 

Selecting switches, pots and 

momentary buttons for mixer and 

auxiliary functions 

Lap counter and stopwatch for 

practising constant lap times. 

Throttle function speed adjustment. 

Variable curve, separate for 

throttle and brake functions. 

NN68

Megatech T4PL-R2104GF 2.4 GHz FHSS No. F3035 

Functions: 

• 40 internal model memories 

• Model name, reset and copy. 

• FHSS / S-FHSS modulation 

• Fail-safe 

• 1 programmable mixer with Offset 

• Free assignment of transmitter controls 

and mixer functions 

• Pre-selectable function levels for beginner 

and pro-standard 

• Graphic servo travel display 

• Basic settings such as contrast, beep and 

Home menu display 

• Timer / Counter: overall and single lap, 

count-up and count-down timer, pre-set 

time with alarm, for overall and single lap, 

lap time list, pit-stop timer 

• Steering: servo centre offset, servo 

reverse, end-point adjustment, servo speed 

in both directions, Exponential 

• Throttle / brake: servo centre offset, servo 

reverse, end-point adjustment, servo 

speed, Exponential function, throttle 

pre-select, start program, traction control 

• Brake: braking power, time, cycle, delay 

and speed (A.B.S). Brake point adjustment, 

brake mixer to channel 3 and 4 

• Channel 3: trim, servo centre offset, servo 

reverse, end-point adjustment, Expo. 


reverse, end-point adjustment 

30 channels at 1.5 MHz spacing. 2404 ... 

2447.5 MHz frequency band. 

28 simultaneous users. 

Transmitter battery, 5NiMH 2000 mAh 

No. 4669 

R2104GF 2.4 GHz FHSS receiverNo. F0996 

NN69

NN70 

Set contents 

1 Megatech T4PKS FASST 2.4 GHz transmitter 

1 steering wheel adapter 

1 5 NiMH 1700 mAh transmitter battery 

1 plug-type 230V AC charger, 170 / 150 mA 

1 R 614FF 2.4 GHz FASST receiver 

1 switch harness

Megatech T4PKS-R614FF 2.4 G FASST 

No. F3034 

Professional four-channel 

pistol-grip computer system for 

RC model car and racing boat 

operators, exploiting 2.4 GHz 

FASST technology with Frequency 

Hopping. 

FASST = No more same-channel interference, 

virtually immune to interference and 

general background interference. 

Modern case design with ergonomically 

efficient arrangement of controls. All the 

controls are well positioned and easy to use. 

The system weighs 680 g including battery. 

Successor to the T4PK system with modified 

rocker button for even easier, more accurate 

cursor control. 

The central operating area with LCD screen 

and four-way rocker is not situated in the 

operator‘s direct field of view, making it 

easier to read off important set-up values, 

even during a race. The integral vibration 

alarm can also be used to inform the pilot 

reliably of alarm warnings or timer signals - 

even when background noise is high. 

The case is designed in such a way that the 

transmitter can be set up equally well for 

left-handed operators and right-handers. In 

conjunction with the position adapter it is 

possible to re-locate the steering wheel at 

the level of the throttle lever, and at various 

angles to it. 

Modulation switching in the transmitter 

between FSK and normal modulation (14 

ms) and HRS-FSK modulation (3 ms), the 

new modulation which is three times faster. 

The separate fourth channel is particularly 

useful for controlling front and rear brakes 

independently in 1: 5 scale RC model cars. 

Software settings allow the braking function 

to be assigned to the 2nd, 3rd or 4th 

channels. 

One completely new feature is the 

ultra-compact R614FF FASST receiver. 

On the one hand the receiver‘s safe 

temperature range has been further 

expanded, on the other the case size has 

been substantially reduced in order to permit 

its use even in small-scale models. 

Start display 


Functions 

8 / 4 servos 



90 mW 

Transmission system FSK / HRS-FSK 


2048 kHz 

Power supply 6 V / 1700 mAh NiMH battery 

Current drain approximately 230 mA 


680 g 


The transmitter is compatible with R 603FS, 

R 603FF and R 604FS FASST receivers. 

R614FF 2.4 GHz FASST receiver 

Frequency band 2.4 – 2.4835 GHz 




2048 kHz 


Voltage 

3.7... 7.4 V 

(4/5 NiMH /1... 2S LiPo) 

Current (mA) 

80 mA 

Dimensions 

35 x 23 x 8 (12) mm 

Aerial length 

19 cm 


8 g 


Transmitter Battery 5 NiMH 2000 mAh 4/5A 

1x 4669 

Plug-type mains charger, Tx4-5Nx-Rx4-5NX 

150mA 1x 8898 


T4YF-T4PK 

1x F1535 


Power Pack, 5 NiMH 1400 2/3A, 

flat 1x 4582 

Neckstrap 1 point 

1x F1550 

Aluminium Tx case for Megatech T-4PK 

1x F1551 

 

 

 

NN71

Easily accessible controls. 

Virtually a small cockpit. 

The steering wheel adapter 

enables the user to install the 

steering wheel in many different 

positions. Can be fitted on the 

back of the case for left-handed 

operators. 

Positioning the „Throttle and 

steering“ axes at the same level 

brings significant ergonomic 

advantages for steering. 

Adjustable throttle trigger lever. 

Selecting switches, pots and 

momentary buttons for mixer and 

auxiliary functions 

Navigation timer provides a 

regular rhythm for practising 

constant lap times. 

Throttle function speed adjustment. 

Separately for both 

directions. 

Variable five-point throttle curve 

for perfect alignment with the 

carburettor response curve. 

NN72

Megatech T4PKS-R614FF 2.4 G FASST No. F3034 

NN73 

Functions: 

• 40 internal model memories 

• Max. 10-character model name 

• Max. 10-character user name 

• Memory reset and copy. 

• Normal and High-Speed transmission 

modes 

• Ultra-fast response times with digital 

servos 

• Fail-Safe 

• Unrestricted assignment of switches and 

transmitter controls 

• Freely selectable Direct Call-up menu 

• Pre-selected menu levels for beginner, 

advanced and pro-standard 

• Special menu level for large-scale models 

• Graphic display of servo travels 

• Base settings including contrast, beep, 

LED colour and home menu display 

• Timer / counter: overall and individual lap, 

count-up and count-down timer, pre-set 

time with alarm for overall and individual 

lap, navigation timer, lap time list, pit-stop 

timer 

• Steering: trim, servo centre offset, servo 

reverse, end-point adjustment, servo speed 

in both directions, Exponential, 2 x steering 

travel limits 

• Throttle / brake trim, servo centre offset, 

servo reverse, end-point adjustment, servo 

speed, Exponential function, VTR or 

5-point curve, idle pre-select, Start 

program, traction control 

• Brake: variable maximum braking power 

• Optional throttle trigger range: 50/50% or 

70/30% 

• ABS brake: brake time, brake cycle, delay 

and speed, brake point adjustment, engage 

point can be set dependent upon steering 

travel. 

• Brake mixer on channels 3 and 4 for 

separate front and rear wheel brakes. 


reverse, end-point adjustment. 


reverse, end-point adjustment 

• Two programmable mixers with offset, 

mix-unmix mode, variable trim increments 

• Trim tab mixer for racing boats 

• 2nd Drive Condition: calls up a second 

adjustment level for a different vehicle 

set-up 

• Mixer for four-wheel steering (e.g. Crawler), 

same and opposite-direction steering, 

button-selectable, variable mixer rate 

• Handle features integral vibration alarm 

Replacement transmitter battery, 

5 NiMH 2000 mAh No. 4669. 

R614FF 2.4 GHz FASST receiver No. F0971

 

Set contents 

1 T6J 2.4 GHz FHSS transmitter 

1 R2006GS 2.4 GHz FHSS receiver 

1 5NiMH 2000 mAh transmitter battery 

1 Tx - Rx plug-type charger, 150 mAh 

1 Switch harness with charge socket 

NN74

T6J-R2006GS 2.4 GHz FHSS 

No. F4100 

Fully expanded six-channel 

computer system exploiting 2.4 

GHz Frequency Hopping technology, 

with ergonomically 

efficient hand-held transmitter 

design. The transmitter is 

therefore approved for operating 

at the maximum power of 

100 mW EIRP, giving it ample 

reserves. 

Compact, nicely balanced six-channel 

computer system of attractive appearance. 

Comprehensive software functions make the 

T6J the ideal beginner‘s system for fixedwing 

model aircraft and helicopters. Central 

input area with clearly legible 127-segment 

LCD screen. 

With stopwatch function for monitoring 

battery time. 

Can be switched to S-FHSS (High-Speed 

mode - only in conjunction with digital 

servos) and FHSS mode. 

Complete set, including high-capacity 

rechargeable battery for 8 to 10 hours 

operating time, plug-type mains charger. 

• No crystals, no spot frequency selection, 

maximum security from radio and background 

interference. 

• Clearly arranged 127-segment LCD screen 

for displaying and adjusting functions. 

• 15 internal model memories. 

• Digital stick trims eliminate the need to 

re-trim or store trim values when swapping 

model memory. 

• Integral Trainer system. 

• Internal transmitter aerial. 

• With charge socket 

• The stick units are designed for universal 

mode (Modes 1 and 2). 


Functions 

12 / 6 servos 



Transmitter power approx. 90 mW 



1500 kHz 

Power supply 

4.8... 6 Volt 

Current drain 


Dimensions 

185 x 200 x 80 mm 


740 g 


28 simultaneous users 


with FHSS receivers, e.g. R603 GF, 

R2004GF, R2104GF, R2006GS. 

R2006GS 2.4 GHz FHSS receiver 





1500 kHz 


Voltage 

4.8... 7.4 Volt 


Dimensions 

43 x 25 x 9/12,5 mm 

Aerial length 

14 cm 


9 g 



T4YF-T4PK 

1x F1535 


Power Pack 4NiMH 2000 Flat (6A) 1x 4218 

Trainer cord FF-9/T14/T12/FX40/30 1x F1591 


1x F1550 


1x F9906 

Alu transmitter case Aero Team 1x F1556 

 

 

 

Central input area with LCD screen 

NN75

Easily accessible controls. 

Precision stick units with digital 

trims. 

Integral charge socket and 

Trainer socket. 

15 internal model 

memories. 

Servo centre offset for 

channels 1... 6. 

2 freely programmable 

mixers 

2nd aileron output, 

optionally on channel 

3... 6. 

NN76

T6J-R2006GS 2.4 GHz FHSS 

No. F4100 

Function list 

Base functions 

• Model select, 15 model memories 

• Model name (4 characters) 

• Stick mode select 1... 4 

• 3 x D/R switchable travels and Exponential 

function (EXP) 

• Digital stick trims with trim value memory 

• Servo end-point adjustment (ATV / EPA), 

separately for both sides 

• Servo centre offset 

• Low voltage alarm 

• Fail-safe setting, channels 1 - 6 

• Reset 

• Mixer type select for fixed-wing or helicopter 

• Switchable modulation, FHSS / S-FHSS 

(High Speed digital mode) 

• Timer 

• Trainer mode, Teacher - Pupil 

• 4 switches and 1 potentiometer as 

transmitter controls 

Fixed-wing: 

• 2 programmable mixers (3-point), 2 rates 

• Flaperon mixer with differential 

• Flaperon trim (2 rates) 

• V-tail mixer 

• Delta mixer 

• 2nd aileron output, optionally on channel 6, 

5, 4 or 3. 

Helicopter: 

• 5-point throttle curve Normal Idle-up 1 

• 5-point collective pitch curve Normal 

Idle-up 1 + 2 

• Hover collective pitch setting 

• Collective pitch -> tail rotor mixer (Revo) 

• Auto-rotation 

• Gyro gain set-up menu 

• Swashplate -> throttle mixer 

• Swashpate - ring mixer 

• Swashplate mixers: H1, HR3 (CCPM 120˚), 

H3 (CCPM 90˚), HE 3 

Transmitter battery 

5 NiMH 2000 mAh No. 4669 

R2006GS 2.4 GHz FHSS receiver No. F 1006 

NN77

T8FG-R6108SB 2.4 GHz LiPo Uni-Mode No. F7036 


Functions 20 / 10 (28 / 14) servos 

Frequency band 2400... 2483.5 MHz 


90 mW 


FSK 


2048 kHz 

Power supply 7.4 V LiIo battery, 2800 mAh 

Current drain 


Dimensions 

175 x 175 x 55 mm 


815 g 


Compatible with the following receivers: 

R6004FF, R6007SP, R606FS, R6106HF/C, 

R6107SP, R607FS, R617FS, R608FS, 

R6008HS, R6108SB, R6014FS and 

R6014HS. 

Receiver R6108 SB FASST 2.4GHz 

With dual antenna diversity system. 

Frequency band 

2,4–2,4835 GHz 




2048 kHz 

Transmission system FSK. / HRS-FSK 

Voltage 4,8-6 Volt (4-5 NC/NiMH) 


Dimensions 

47 x 25 x 14.3 mm 

Aerial length 

13 cm 


14 g 

Compact, elegant, manageable 

10- (14-) channel computer 

system with integral 2.4 GHz 

FASST technology. Complete 

set contents, including Lithium 

2S 2800 mAh transmitter battery 

for operating times of up to 

ten hours, and 230 Volt / 500 

mA Lithium mains charger. 

As of mid-January 2011 the download area 

on the robbe website will include a free 

software update for this system, which 

increases the number of control channels 

from 8 + 2 auf 12 + 2 (MULTI2 mode). 

Naturally existing systems can be updated 

by the user himself. This makes it easily 

possible to control model gliders with up to 

NN78 

eight wing flaps, as well as large-scale 

fixed-wing models and jets with auxiliary 

functions. 

The update also includes the following 

supplementary functions: 

• Servo centre offset for roll, pitch-axis and 

collective pitch functions in the swashplate 

menu 

• Variable collective pitch speed 

• Expansion of the Power model and Glider 

wing types in Multi2 mode 

• Variable propeller pitch function (VP) 

• Free function selection for throttle and 

butterfly (crow) controls, flight phase 

specific 

• Neutral and end-point calibration menu for 

sticks 1 - 4 

• Free menu choice; every user can 

assemble his own user menu including the 

functions he most often uses. 


Charge Lead T12FG/FX-30 1.7mm 1x 8260 



Trainer cord FF-9 

1x F1591 

2.4 GHz Wireless Trainer System 1x F1414 


1x F1550 

T8 FG carbon transmitter tray 1x 8558 

T8 FG carbon-look transmitter tray 1x 8557 


1x F9906 

Alu transmitter case Aero Team 1x F1556 

robbe-Futaba Aeroteam aluminium 

transmitter case 1x 8899 

Set contents 

1 T8FG 2.4 GHz FASST transmitter 

1 R6108SB 2.4 GHz FASST receiver 

1 7.4 V LiIo 2800 mAh transmitter battery 

1 Lithium mains charger, 8.4 V / 500 mA 

1 Switch harness 

1 Screwdriver

FX-20 R6108SB 2.4 GHz FASST 

No. F8072 


Functions 

20/10 servos 


2...4,2.4835 GHz 


90 mW 


FSK 


2048 kHz 

Power supply 

2 pieces LiPo battery 

3400 mAh 

Current drain 

approximately 220 mA 

Dimensions 

205 x 220 x 55 mm 


1000 g 


Compatible with the following receivers: 

R6004FF, R6007SP, R606FS, R6106HF/C, 

R6107SP, R607FS, R617FS, R608FS, 

R6008HS, R6108SB, R6014FS and R6014HS. 

Receiver R6108 SB FASST 2.4GHz 

With dual antenna diversity system. 


2,4–2,4835 GHz 




2048 kHz 

Transmission system FSK. / HRS-FSK 

Voltage 

4,8-6 Volt (4-5 NC/NiMH) 


Dimensions 

47 x 25 x 14.3 mm 

Aerial length 

13 cm 


14 g 

Fully expanded 10- (14-) channel 

computer transmitter for traymounted 

use, with integral 

FASST 2.4 GHz technology. 

As of mid-January 2011 the download area 

on the robbe website will include a free 

software update for this system, which 

increases the number of control channels 

from 8 + 2 auf 12 + 2 (MULTI2 mode). 

Naturally existing systems can be updated 

by the user himself. 

This makes it easily possible to control 

model gliders with up to eight wing flaps, as 

well as large-scale fixed-wing models and 

jets with auxiliary functions. 

The update also includes the following 

supplementary functions: 

• Servo centre offset for roll, pitch-axis and 

collective pitch functions in the swashplate 

menu 

• Variable collective pitch speed 

• Expansion of the Power model and Glider 

wing types in Multi2 mode 

• Variable propeller pitch function (VP) 

• Free function selection for throttle and 

butterfly (crow) controls, flight phase 

specific 

• Neutral and end-point calibration menu for 

sticks 1 - 4 

• Free menu choice; every user can 

assemble his own user menu including the 

functions he most often uses. 



Lipoly Battery FX-30 7,4V 3400 mAh 1x 4846 

Charge Lead T12FG/FX-30 1.7mm 1x 8260 


Trainer cord FF-9 

1x F1591 

2.4 GHz Wireless Trainer System 1x F1414 

Contr.Stick Exten.D10,5X47 1x 8086 

FX 30 neckstrap system 1x 8384 

FX 30 neckstrap system + support 1x 8381 

Acrylic Transmitter Tray FX-30 1x 8547 

Transmitter Tray FX-30 CFK 1x 8491 

robbe-Futaba Aeroteam aluminium transmitter case 

1x 8899 

Set contents 

1 FX-20 transmitter 

1 LiPo transmitter battery, 7.4 V / 3400 mAh 

1 R 6108 SB FASST receiver, 2.4 GHz 

1 switch power cable with recharger 

1 12 V Lithium battery charger (2 A) 

1 230 Volt SPS mains PSU for charging from 

the mains supply 

NN79

Receivers 

R2104GF 2.4 GHz FHSS receiver 

 

No. F0996 

 

Small, lightweight 2.4 GHz FHSS four-channel 

receiver incorporating Frequency 

Hopping technology. 

No crystals, no spot frequency selection, and 

maximum protection from same-channel 

interference thanks to high-speed 2.4 GHz 

FHSS technology. High-speed Frequency 

Hopping for effective suppression of interference 

signals. 

Automatic switching between S-FHSS 

(High-Speed mode - only in conjunction with 

digital servos) and FHSS mode. 

Frequency Hopping system with thirty channels 

at 1.5 MHz spacing in the 2404 - 2447.5 MHz 

range. Maximum 28 simultaneous users. 

Not compatible with FASST transmitters. 

Only for FHSS systems such as T2PL, 

T3PL, T4YF, T4PL, T6J) 

Not recommended for large-scale model 

aircraft and jets. 

Range: approx. 1000 m 

 






1500 kHz 


Voltage 

4.8 - 7.4 Volt 

(4... 5 NC / NiMH or 2S LiPo) 

Current 

40 mA 

Dimensions 

39 x 26 x 12.5 mm 

Aerial length 

17 cm 


8 g 

R2006GS 2.4 GHz FHSS receiver 

No. F1006 

 

Small, lightweight 2.4 GHz FHSS six-channel 

receiver incorporating Frequency 

Hopping technology. 

No crystals, no spot frequency selection, and 

maximum protection from same-channel 

interference thanks to high-speed 2.4 GHz 

FHSS technology. High-speed Frequency 

Hopping for effective suppression of interference 

signals. 

Frequency Hopping system with thirty channels 

at 1.5 MHz spacing in the 2404 - 2447.5 MHz 

range. Maximum 28 simultaneous users. 

Not compatible with FASST transmitters. 

Only for FHSS systems such as T2PL, 

T3PL, T4YF, T4PL, T6J) 

Not recommended for large-scale model 

aircraft and jets. 

Range: approx. 1000 m 






1500 kHz 


Voltage 

4.8... 7.4 Volt 

Current 

40 mA 

Dimensions 

43 x 25 x 9/12,5 mm 

Aerial length 

14 cm 


9 g 

NN80

Receivers 

R614FF 2.4 GHz FASST receiver 

 

No. F0971 

 

Ultra-small four-channel FASST receiver 

for Futaba car systems. 

Wide voltage range, suitable for use with 2S 

LiPo batteries can be switched from Normal 

to High Speed Mode (3 ms) for extremely 

fast servo response (only in conjunction with 

digital servos). The low-profile design makes 

it a good choice for small-scale models. 

Extremely wide temperatuer range - ideal for 

RC model cars with glow engines. 

 

 






2048 kHz 


Voltage 3.7... 7.4 V (4/5 NiMH /1... 2S LiPo) 

Current 

80 mA 

Dimensions 

35 x 23 x 8 (12) mm 

Aerial length 

19 cm 


8 g 

R6008SP 2.4 GHz RASST receiver 

No. F0993 

 

Compact, lightweight eight-channel 2.4 

GHz RASST receiver with end-mounted 

servo sockets. With serial output, 

therefore ideal for controlling helicopters, 

quadrocopters and other models. 

With two aerials and diversity system. With 

extended range of more than 3000 m, 

making it suitable for large-scale flying 

machines. Where necessary, the 13 cm long 

aerials can be deployed outside the model if 

the fuselage or chassis is made of carbon 

fibre or metal. 

A serial output at the receiver requires 

special modules in the model which are 

capable of reading out the signal chain and 

processing it appropriately, e.g. the HC 

3-Xtreme or Mini-V-Stabi, Mikrokopter, etc. 

Conventional servos cannot be connected 

directly. 

No crystals, no spot frequency selection and 

maximum security from same-channel 

interference thanks to 2.4 GHz RASST 

technology. High-speed Frequency Hopping 

for effective suppression of interference 

signals. High Intermediate Frequency of 800 

MHz for immunity to general background 

interference. Integrated EASY-Link button for 

simple binding. 

Can be used with all FASST transmitters 

with 8 channels or more when set to 

multi-channel mode. 

Recommended accessories: 

4090 GY520, HC3-X connecting lead, 65 mm 










2048 kHz 


Voltage 3.3 - 8.5 Volt (4 NiMH... 2S LiPo) 

Current 

45 mA 

Dimensions 

47 x 25 x 14.3 mm 

Aerial length 

13 cm 


13 g 

NN81

Receivers 

R6208SB-HV 2.4 GHz FASST 

receiver 

No. F1018 

 

8 /18 - channel 2.4 GHz full-range FASST 

receiver, slim and lightweight for models 

with limited internal space. With serial 

bus (S-BUS) system for up to 18 channels, 

making it ideal for large-scale model 

aircraft. One for all. 

New version of the S-BUS receiver with 

extended voltage range, up to 8.4 Volt (2S 

LiPo operation). 

Eight conventional analogue or digital servos 

can be connected to outputs 1... 8. The R 

6208SB receiver features a change-over 

switch for selecting digital or analogue 

servos. This generates an even faster frame 

rate for digital servos at outputs 1 - 6, 

resulting in even faster response. 

New: S-BUS output 

Up to eighteen of the new, programmable 

S-BUS servos can be connected in series 

directly to this output. Digital addressing 

means that the servo only responds to 

information which contains the correct servo 

address. No more cable spaghetti: one lead 

per wing and one to the tail in large models. 

It just could not be simpler. 

Naturally it is also possible to exploit this 

lead - and the associated weight savings - 

with conventional analogue or digital 

standard servos; this is accomplished by 

looping in a PWM adapter, which converts 

the signal from S-BUS to PWM. 

 






2048 kHz 


Voltage 3.7... 7.4 Volt (4... 5 Nx / 1... 2 LiPo) 

Current 

50 mA 

Dimensions 

47 x 25 x 14.3 mm 

Aerial length 

13 cm 

NN82

BL servos 

SBE4-S-BUS expander 

4-channel No. 8885 

 

The S-BUS expansion SBE-4 converts 

S-BUS channels to PWM-channels when 

standard - servos - and speed controllers 

are connected. 

It is connected to the S-BUS output of the 

receiver R6108SB or R6208SB and expands 

the 8 standard PWM-servo-ports by a further 

4-channels. 

With this accessory, this very compact 

receiver will be expanded to an inexpensive 

12-channel receiver. As standard, the 

outputs are pre-programmed with channels 

9…12. 

Using the CIU-2 Adapter and the free 

PC-Link-Software, the servo outputs of the 

SBE-4 are freely programmable. That 

means: 

That the channel allocation as well as the 

positioning parameters (direction, neutral 

position, end points, speed) may all be 

set-up as required. 

RBS1010HV brushless servo No. 8900 

 

Fast, powerful digital servo with brushless motor and a very 

good price: performance ratio. 

Robust metal gearbox with twin ballraces. Also suitable for direct 

High-Volt operation with 2S batteries. In this mode the servo delivers 

a torque of more than 120 Ncm. 

The advantages of Brushless-Motor technology: 

• 30% faster Reaction time = better acceleration 

• more resistant to shock and vibration 

• higher efficiency, lower heat generation 

• no brush wear = 5 times motor life 

• Special-Gearbox = no backlash 

• Samarium-Cobalt magnets 

• higher resolution 

• same current drain as normal digital servos 

 

 

 


Nominal voltage 4.8Volt/6Volt/7.4Volt 

Torque 

80Ncm/107Ncm/124Ncm 

Holding power 200Ncm/267Ncm/310Ncm 

Transit speed 0.097s/45˚/0.075s/45˚/0.059 

Operating voltage 4.8 - 7.4 Volt 

No. of cells 

4 - 5 NiMH, 2S LiPo 

Weight approx. 63 g 

Dimensions 40 x 20 x 36.8 

NN83

Gyros 

GY 701 gyro 

No. F1640 

 

The GY701 gyro is a further developoment of the GY611 

exploiting the very latest MEMS sensor technology. The new 

MEMS sensor features even higher sensitivity and rotational 

speed (up to 1200˚/sec.) and yet is highly resistant to vibration. 

The sensor is located in a separate aluminium housing for further 

improved vibration absorption, resulting in higher sensor sensitivity. 

Overall the enhanced sensitivity in conjunction with increased speed 

result in an even higher level of stabilisation. 

This gyro can be expanded with an optional rotational speed sensor 

to form a combined gyro and speed governor in a single case, for 

fastest possible communication between the units. 

Gyro range 

Wide dynamic regulatory range of +/- 1200˚/sec. 

 


Nominal voltage 

4.8Volt/6Volt/7.4Volt 

 

Operating voltage 

3.8 V... 8.4 V DC 

 

 

at receiver output 

No. of cells 

4... 5 NC / NiMH, 2S LiPo 


27.5 g 

Temperature range 

-15... +55˚C 

Current 

80 mA 

Weight: 14.5 g (gyro sensor) 

 

13 g (electronics box) 

Dimensions: 

21 x 21 x 8 mm (gyro sensor) 

 

44 x 29 x 13 mm (electronics box) 

Servo frame rate: 

70 Hz (analogue), 280 Hz (digital). 

 

1520 µs, 570 Hz digital 760 µs) 

In conjunction with the ultra-fast micro-processor and a special PID 

control algorithm the GY701 delivers an unprecedented level of 

performance for competition models. The electronic connection / 

set-up box is fitted with an OLED screen which is highly legible even 

in bright sunlight. 

If a rotational speed sensor is connected, the GY701 can be 

expanded to include the function of a speed governor, ensuring that 

the gyro and governor interact perfectly. 

A single lead supplies all the essential information from the receiver 

via the S-BUS connection; even the collective pitch position can be 

interrogated in order to obtain optimum regulatory behaviour. 

Electronics box 

With bright, high-contrast OLED screen (128 x 36 dots). 

Firmware update possible using CIU-2 adapter. 

Support for analogue and digital servos (1520µs) and digital servos 

(760 µs) with S-BUS connector. 

Collective pitch signal interrogation using F/F mixer (S-BUS only) 

Switchable F3C or F3D mode 

GY 701 gyro + BLS 251 

No. F1641 

 

Variant of the GY701 gyro, as described earlier, but with BLS 251 

brushless servo and rotational speed sensor in the set. 

Specification BLS 251 

Operating voltage: 

Cell count: 

Torque: 

Transit speed: 

Weight: 

Twin ballraces, aluminium case, metal gearbox 

4.8 - 6 Volt 

4 NiMH 

38 / 47 Ncm 

0.045 / 0.038 sec./45˚ 

61 g 

NN84

Gyros 

Specifiication: 


3.8 V... 8.4 V DC at 

 

receiver output 

No. of cells 



-15... +55˚C 

Current 

80 mA 

Weight: 


Servo frame rate: 70 Hz (analogue), 280 Hz (digital) 

1520 µs, 570 Hz digital 760 µs 

Rotational speed resolution: 

0.1 Hz / 6 rpmn 

Speed constancy: 1% 

GY 701 governor 

No. F1643 

 

The GY701 governor is a speed regulator for model helicopters 

powered by internal-combustion engines, offering regulator or 

limiter modes, based on the GY701 electronics box. 

The electronic connection / set-up box is fitted with an OLED screen 

which is highly legible even in bright sunlight. 

A simple and clearly arranged method of configuring the settings. 

3 operating modes are available 

- Regulation of motor speed 

- Limiting of motor speed 

- Regulation of rotor speed. 

The nominal rotational speed can be set at the electronics box, or in 

the governor set-up menu of the Futaba transmitter. All essential 

information from the receiver is available via the S-BUS connection 

using a single lead; in addition to the tail rotor data even the 

collective pitch position can be interrogated in order to obtain 

optimum regulation. 

Electronics box 

With bright, high-contrast OLED screen (128 x 36 dots). 

Firmware update possible using CIU-2 adapter. 

Supports analogue and digital servos (1520µs) and digital servos 

(760 µs) 

With S-BUS connection. 

Collective pitch signal interrogation with F/F mixer (S-BUS only) 

Switchable F3C or F3D modes 

Speed governor range: 1000 - 3000 rpm/ 

Rotational speed compensation for tail rotor control system 

Selectable speed governor or speed limiter mode 

Storage of max. rotational speed value 

 

 

 

GY 701 gyro + governor 

No. F1642 

 

GY701 gyro plus governor: the perfect DUO, combining the 

latest MEMS gyro sensor technology and speed governor. 



3.8 V... 8.4 V DC at receiver output 

No. of cells 



-15... +55˚C 

Current 

80 mA 

Weight: 

14.5 g (gyro sensor), 

 


Dimensions: 

21 x 21 x 8 mm (gyro sensor), 

 

44 x 29 x 13 mm (electronics box) 

Servo frame rate: 70 Hz (analogue), 280 Hz (digital) 1520 µs, 

570 Hz digital 760 µs 

Speed resolution: 

0.1 Hz / 6 rpm 

min. speed constancy: 1% 

NN85

Simple method of connecting S-BUS and SP 

receivers using a single lead. 

Set contents 

• HC3-Xbase incl. fixings 

• Cable loom to receiver (90 mm) 

• Short-form operating instructions 

• USB lead for direct connection to a PC / 

notebook 

NN86 

HC3-Xbase No. 8572 

The HC3-Xbase is the entrylevel 

product in the robbe 

HeliCommand flybarless system 

series, for controlling 

flybarless helicopters with the 

H1 and H3-120˚ linkage. 

Flybarless model helicopters are significantly 

more manoeuvrable due to their reduced 

weight, and typically deliver about 15 % 

more performance. The HC3-Xbase results 

in huge performance, not to mention the 

elimination of the set-up procedure on the 

vulnerable flybar mechanics. 

The system‘s outstanding feature is its 

overall precision, i.e. in extreme dynamic 

manoeuvres (F3N style), aerobatic manoeuvres 

(F3C), and stable hovering. The 

helicopter tracks accurately through all 

manoeuvres, i.e. without any trace of 

unwanted effects, and with maximum 

‚locked-in‘ characteristics. All this is achieved 

with minimum set-up work due to the 

intelligent and carefully optimised regulatory 

algorithms. 

The HC3-Xbase has full 3D capability due to 

its high-quality latest-generation silicon 

MEMS sensors. It also incorporates a very 

high-quality ultra-fast tail rotor gyro. No 

separate tail gyro required! The system also 

includes symmetrical torque control. The 

further improvement in tail holding power is 

achieved by coupling the tail rotor gyro 

internally with the collective pitch data from 

the rotor head control system. 

Naturally the system is also suitable for 

flybarless scale helicopters (two-blade 

and multi-blade), and for other types of 

flybarless helicopter such as trainers 

etc., with the H1 or H3 120˚ linkage. 

An additional feature is that the flybarless 

system can be switched off, allowing you to 

fly „normal helicopters“ with a flybar head; in 

this state only the tail rotor gyro function is 

active. 

It is equally suitable for helicopters powered 

by electric motor, glow engine, or turbine. 

The system supports all current analogue, 

digital and brushless servos, including 

narrow-pulse types (760 µs) for the tail rotor 

(e.g. robbe-Futaba S 9251 or BLS 251). 

The base version provides the most 

commonly used swashplate variants H1 and 

H3-120˚, and the system can be upgraded to 

cater for more swashplate types. The 

HC3-Xbase can be updated to the full 

functionality of the HC3-Xtreme by means 

of an Internet upgrade using the USB 

adapter supplied in the set. 

The system can operate as a pure tail rotor 

gyro without further accessories, e.g. if you 

wish to test-fly a new model with a flybar 

head, then plan to convert it to a flybarless 

system subsequently. In this case you do not 

need to purchase a separate tail gyro; all 

you have to do is switch off the Rigid 

function. 

The swashplate mixing is carried out by the 

HC3-Xbase, i.e. only a simple transmitter is 

required. 

With its CNC-machined aluminium case and 

elegant design the unit easily matches the 

current high standards of quality of the major 

helicopter manufacturers. 

The ultra-compact design and flexible 

provision for installation make the unit 

suitable for use in virtually any helicopter. 

• Set-up work is reduced to a minimum, not 

least due to the clear separation between 

the gain settings for the rotor head gyros 

and the tail gyro, using two independent 

auxiliary channels. 

• Direct USB connection for fast programming; 

the convenient set-up software and 

operating instructions can be downloaded 

at no cost from the website. 

• The leads between receiver and HC3- 

Xbase feature plug-in connectors at both 

ends. 



4... 10 V 


18 g 

Dimensions 

36 x 34 x 14 mm 

Max. tail rotor rotational speed: 650˚/sec 

Max. roll & pitch speeds: 500˚/sec (typical) 

Servo frame rate: selectable 55 Hz / 220 Hz. 

Tail rotor servo output: selectable 1520 μs / 

 

760 μs. 

Servo currents: total 10 A continuous 


battery connector lead GY520, HC3-X 65 mm 

1x 4090 


1x 4091 


1x 4092 


1x 4093 

GY520 - HC3-X connecting lead, 500 mm 

1x 4096 

• The system features a gold-plated circuit 

board and the latest generation of MEMS 

sensors acting on all three axes. 

• Direct connection facilities to the new 

single-cable receivers (serial pulse output 

SP), such as the robbe R6007SP FASST 

receiver, robbe/Futaba S-BUS and 

Spektrum/JR satellites (in which case the 

primary receiver is not required). In this 

case the throttle output and a second 

output (e.g. governor, retractable 

undercarriage, lighting system, etc.) are 

available directly at the HC3-Xbase. 

 

NN87

Simple method of connecting S-BUS and SP 

receivers using a single lead. 

Set contents 

• HC3-SX including fixings 

• Cable loom to receiver (90 mm) 

• USB stick containing PC software (Win98, 

ME, 2000, XP, Vista, 7) and operating 

instructions 

• USB lead for direct connection to PC / 

notebook 

NN88

HC3 - SX No. 8571 

The HC3-SX is the top model in 

the range of the robbe HeliCommand 

Flybarless system (Rigid) 

for controlling all current types 

of helicopter with flybarless 

rotor heads. The functions of 

the successful HC3 Xtreme 

have been expanded with the 

new patented horizontal stabilisation 

(self-levelling) system. 

This safety function also provides a means 

of rapidly, deliberately and fully automatically 

bringing the model back to a level flight 

attitude from manoeuvres such as the tik-tok 

or piro-flip. 

This makes it possible to learn the skills of 

3D aerobatics, and to return to level flight 

quickly, safely and automatically if a critical 

situation should develop. Virtually a „real 

flying simulator“, combined with a huge fun 

factor. It is possible to set the degree of 

stabilisation, and switch horizontal mode on 

and off, directly from the transmitter using an 

auxiliary channel. 

This functionality is made possible by the 

latest generation of high-quality silicon 

MEMS gyro sensors. This provides the 

HC3-SX with full 3D capability. It also 

incorporates a very high-quality ultra-fast tail 

rotor gyro. No external gyro is required! 

The system also includes symmetrical 

torque control. The further improvement in 

tail holding power is achieved by coupling 

the tail rotor gyro internally with the collective 

pitch data from the rotor head control 

system. 

This system is naturally suited to scale 

flybarless helicopters (two-blade or multiblade) 

or other flybarless helicopters 

such as trainers etc. The horizontal 

mode, which can be switched on at any 

time, makes the system an excellent 

choice for beginners. 

The HC3-SX can be used in helicopters with 

electric and glow power as well as turbinepowered 

models (please observe the safety 

note in the instructions relating to turbines 

installed in scale fuselages.) The system 

supports all current analogue, digital and 

brushless servos, including narrow-pulse 

types (760 µs) for the tail rotor (e.g. robbe- 

Futaba S 9251 or BLS 251). The system 

supports all commonly used swashplate 

types, including four swashplate servos (H1, 

H3-90˚, H3-120˚, H3-140˚, H4-90˚, H4- 

90˚+45˚), as well as virtual swashplate 

rotation. 

The system can operate as a pure tail rotor 

gyro without further accessories, e.g. if you 

wish to test-fly a new model with a flybar 

head, then plan to convert it to a rigid system 

subsequently. In this case you do not need 

to purchase a separate tail gyro; all you have 

to do is switch off the Rigid function. The 

swashplate mixing is carried out by the 

HC3-SX, i.e. only a simple transmitter is 

required. 

With its CNC-machined aluminium case and 

elegant design the unit easily matches the 

current high standards of quality of the major 

helicopter manufacturers. The ultra-compact 

design and flexible installation provisions 

make the unit suitable for use in virtually any 

helicopter, from micro-helis up to 3.5 m scale 

machines. 

• Set-up work is reduced to a minimum, not 

least due to the clear separation between 

the gain settings for the rotor head gyros 

and the tail gyro, using independent 

auxiliary channels. 

• Can also be used as a pure tail rotor gyro 

without further accessories. 

• Direct USB connection for fast programming; 

the convenient set-up software is 

included in the set. 

• The leads between receiver and HC3-SX 

feature plug-in connectors at both ends. 

• The system features a gold-plated circuit 

board and the latest generation of MEMS 

sensors acting on all three axes. 



4... 10 V 


18 g 

Dimensions 

36 x 34 x 14 mm 

Max. tail rotor rotational speed.: 650˚/sec. 

Max. roll / pitch speeds: 500˚/sec (typical) 

Servo frame rate: selectable 55 Hz 

 

analogue / 220 Hz digital. 

Tail rotor servo output: selectable 1520 μs / 

 

760 μs. 

Servo currents: total 10 A continuous 



1x 4090 


1x 4091 


1x 4092 


1x 4093 

GY520 - HC3-X connecting lead, 500 mm 

1x 4096 

• Direct connection to the new SP and 

S-BUS receivers with serial sockets, such 

as the R6007SP, R6108SB. Direct 

connection to 2.4 GHz Spektrum and JR 

satellites (in which case the primary 

receiver is omitted). 

• In this case the throttle output and a 

second output (e.g. governor, retractable 

undercarriage, lighting system, etc.) are 

available directly at the HC3-SX. 

• Flexible installation provisions: horizontal or 

vertical 

• The HC3-SX features Flash memory, which 

means that it can be updated to the latest 

software state at our Service Centre. 

• Existing HC3-Xtreme gyros can also be 

upgraded at any time to include the 

horizontal stabilisation (self-levelling) 

function. This requires the unit to be sent to 

the robbe Service centre. 

 

NN89

Battery chargers 

FX20 - 40 two-position changeover 

switch, short No. F1700 

 

FX20 to FX40 transmitter 2-position 

change-over switch, short. 

 

 

FX20 - 40 change-over switch, 

2-position long No. F1701 

 


change-over switch, long. 

 

 

 

FX20-40 change-over switch, 

3-position short No. F1702 

 


change-over switch 

 

FX20-40 change-over switch, 

3-position long No. F1703 

 

FX20 to FX40 transmitter 3-position locking 

change-over switch 

 

FX20-40 momentary button, 

2-pole long 

No. F1704 

 


momentary switch, long 

 

FX-40 locking 2-position 

change-over switch No. F1705 

 

FX-20+30 locking 2-position 

change-over switch No. F1706 

 

 

 

Plug-type mains charger, Tx4-5Nx-Rx4-5NX 

150mA No. 8898 

Inexpensive mains charger for NiCad/NiMh Tx and Rx batteries. 

For 2.4 GHz Skysport T4YF, T4PL, T4PKS, T6J transmitters. 

The charger has two separate outputs each with 150 mA current 

rating and LED charge indicators. The Tx and Rx outputs are 

always configured for 4-5 cells NiCad/NiMh. 

Connector plug: 

Tx = I Ø 1,3mm 

Rx = Futaba Servo socket. 

Lead length, each approx. 100 cm. 

 


Charge current 150 mA per output 

No. of NC cells 

4...5 NiCad/NiMH 

FX-20 / 30 stick springs, hard 

No. 8299 

 

 

NN90

Power Peak ® Uni 7 EQ, 230V No. 8564 


Input voltage 

Dimensions 


230V AC 

150 x 130 x 80 mm 

560 g 


Voltage sensor cable 3-P. 0,2 qmm 1x 4025 

Voltage sensor cable 4-P. 0,2 qmm 1x 4026 

Voltage sensor cable 5-P. 0.2 qmm 1x 4027 


Charge Lead T12FG/FX-30 1.7 mm 1x 8260 

Transmitter charge lead 1,3 mm T4YF-T4PK 

 

1x F1535 



Battery charge leads GO 3 1x 4114 

Charge lead gold 3.5 mm, 30 cm 1x 8256 


Charge cable Jst/TAM 1x 8192 

Charge cable AMP 1x 8253 

High-performance 230V universal 

battery charger with integral 

switch-mode mains power 

supply, for charging all commonly 

used types of transmitter 

and receiver batteries, as well 

as starter and flight batteries. 

Up to 7 batteries of LiPo, LiFe, NC, NiMH 

and lead-acid types can be simultaneously 

charged, the total charge current is 3.6 

Ampere. 

The charge outputs are divided into 

battery type: 

• 2 outputs with CC-CV automatic cut-off are 

for LiPo- and LiFe batteries. Both of these 

outputs are additionally fitted with an 

Equalizer, which balances the batteries to 

the optimum. 

• 4 Constant current outputs for NC and 

NiMH batteries, of which one is fitted with a 

Delta-Peak automatic 

• Output is similarly fitted with a CC-CV automatic 

cut-off and with the voltage stability 

optimised for lead-acid batteries. 

• Each output is equipped with a visual 

charge monitor in the form of a long-life 

light-emitting diode (LED). 

• Winter program for LiPo-batteries (charge 

mode LiFe) 

Comprehensive protection functions: 

• Short-circuit protection 

• Polarity protection 

• Incorrect connection protection 

The incorrect connection protection is 

particularly noteworthy, should the charge 

lead be accidentally connected to two plus 

- or minus outputs, then chargers until now 

would almost always suffer a short circuit 

which can cause problems with the charger 

outputs. 

High charge currents guarantees short 

charge times. 

• Output 1: 1000 mA, 2-4S LiPo/LiFe with 

Equalizer and CC-CV automatic cut-off. 

• Output 2: 500 mA, 2-4S LiPo/LiFe wthi 

Equalizer and CC-CV automatic cut-off 

• Output 3: 1000 mA, 4 - 8 NC/NiMH with 

Delta-Peak automatic cut-off. 

• Output 4: 250 mA, 4 - 8 NC/NiMH 



• Output 7: 500 mA, 1-6 cells (2, 6, 12V) for 

lead-acid batteries, glow batteries with 

CC-CV automatic cut-off 

 

 

 

 

 

 

 

 

NN91

NN92 

Set contents 

• 1 Power Peak ® Twin charger 

• 2 x 7 cells Balancer Adapter XH 

• 2 x 7 cells Balancer Adapter FP/TP 

• 2 x 7 cells Balancer Adapter PQ 

• 1 x Temperature sensor 

• 2 x BID CHIP with lead

Power Peak ® Twin EQ-BID 1000W No. 8563 

NN93 

The ultimate 1000 W charge 

station for the professional 

modeller. Two outputs each 

with 500 watt power and up to 

20 A charge current in a single 

case. The Mega-Power charger 

that can recharge your LiPo 

power batteries in the shortest 

possible time. 

Both charge circuits work completely 

separate from each other and can also be 

set individually. The display is split for each 

charge output and therefore all the most 

important charging data will be simultaneously 

displayed. 

The display is made using a blue, backlit 

128 x 64 pixel graphic LC-Display. 

The menu navigation can be switched 

between german, english or french languages. 

The integrated Equalizer automatically 

balances the voltage level of the individual 

cells during the charging process. The 

Equalizer current is approximately 250 mA 

and is sufficient also for batteries with a 

capacity exceeding 5Ah. 

By connecting it to the Robbe SPS-Mains 

Power Supply 240V/40A No. 8539, the 

charge station can also be used at home 

and powered by the mains. 

Simple, secure operation and automatic 

storage of the essential battery data in the 

robbe BID system (Battery-IDentification- 

System). 

The special advantage of the BID-System 

is: 

• Simply plug the BID-Key into the charger 

and the charge process begins 

• No tiresome adjustments of charge 

parameters in the menu 

• Maximum protection against incorrect 

operation 

• Storage of the most important battery data 

on the BID-Chip/Key 

• Naturally, the Power Peak ® Twin Charger 

can charge batteries not fitted with 

BID-System 

• 2 BID-Chips are included with the charger. 

Functions: 

• 11…28V DC-Input 

• 2 x 0.1…20A charge current (max. 500W 

per output with 24 V operations, 300W with 

12V operation) 

• 2 x 0.1…10A discharge current (max. 50W 

per output) 

• 2 x Temperature Sensor inputs (10-60˚C) 

• 2 x 20 internal battery data memories 

• 128 x 64 Pixel blue illuminated LCD display 

• 10 melodies (selectable for every channel) 

• USB-connection for Firmware-Upgrades 

NC/NiMH batteries 

• 2 x 1…18 NC/NiMH cells - charge, 

discharge and cycle charge 1-10 x 

• Charge process, automatic, normal, linear 

and reflex charging 

• Adjustable maintenance charging 

• Adjustable Peak ® sensitivity 

Lithium batteries, LiIo (3.6 V), LiPo (3.7V) 

or LiFe (3.3V) 

• 2 x 1…7 Lithium cells - charge and discharge 

• Charge performance selectable up to 5C 

• TCS (Terminal Capacity Selection) Cut-off 

point on CV-charge range (10-100%) 

• maximum cell voltage adjustable 

• Safety-Timer cut-off (10...120%) 

• Maximum-capaczity cut-off (10-150%) 

• Storage mode (60%) 

Lead-acid batteries 

• 2 x 2…24V BP Lead-acid batteries 

- charge and discharge 


Input voltage 

11...28 V DC 

No. of cells 

NC/NiMH 

2 x 1…18 cells 

Lithium batteries LiIo, LiPo, LiFe 

 

2 X 1...7 cells 

lead-acid batteries 1-12 cells, 2...24 Volt 

Charge current 

2 x 0.1...20 A 

Discharge current 

2 x 0.1...10 A 

Dimensions 

170 x 175 x 60 mm 


1220 g 


Bid-Key 1x 8888 

Bid-Chip 1x 8472 

Voltage sensor cable 3-P. 0,2qmm 1x 4025 


Voltage sensor cable 5-P. 0.2qmm 1x 4027 





1x 8539

Working display with indicators for voltage, 

charge time, battery type, charge current 

and capacity. 

Summary of individual cell voltages: 

resolution to one hundredth of a volt. 

Set contents 

1 x Power Peak ® Triple 360W EQ-BID with 4 mm gold connectors 

1 x BID –CHIP with lead 

1 pair of plug-in croc-clips in red and black 

 

NN94 

Detail display of individual cell voltages: 

resolution to one thousandth of a volt.

POWER Peak ® TRIPLE 360W EQ-BID No. 8562 

NN95 

The proven Power Peak ® TRI- 

PL3 charge-discharge station 

has been more than doubled in 

output power and now supplies 

3 x 120 Watt charge power. 

This charger is perfect for simultaneously 

recharging several high capacity 6S Lipo 

batteries in the shortest time. 

Charge-discharge station with battery 

management for 3 x 1…14 cell NiCad/NiMH 

batteries, 3 x 1…6 cell LiIo, LiPo or LiFe 

batteries, as well as 3 x 2...12V lead-acid 

batteries. With 3 integrated Equalizers and 3 

BID-Systems. 

This 3-output Universal-charge-discharge 

station is a compact charging unit for all who 

need to charge many batteries at the same 

time from a mobile 12 V DC source. 

The charger‘s wide charge current range of 0.1 

to 5 A makes it suitable for small slow-fly 

models, transmitter and receiver batteries, and 

also for large surface and flight packs. 

Each charging circuit has its own Equalizer and 

BID connector. Simultaneous, but fully 

independent charging of 3 batteries. Naturally, 

the charging of one battery type (3x LiPo), as 

well as other battery types (NiCad, NiMH, and 

LiPo), can be made simultaneously and 

independent from each other. 

By connecting it to the Robbe SPS-Mains 

Power Supply 240V/40A No. 8539, the charge 

station can also be used at home connected to 

the mains supply. 

The control and display of the charge 

parameters are made via a combined 

CAP-Touch-Keypad and a backlit LC-Display, 

which will be switched to the respective output. 

The menus can be chosen from german, 

english, french, italian and spanish languages. 



cells during the charging process. The 

Equalizer current is approximately 250 mA and 

is also sufficient for batteries with a capacity 

exceeding 5Ah. Simple, secure operation and 

automatic storage of the essential battery data 

in the robbe BID system. (Battery-IDentification-System. 

The unique advantage: 

• Simply plug the BID-Key into the charger and 

the charge process begins. 

• No tiresome adjustments of charge parameters 

in the menu 

• Maximum protection against incorrect operation 

• Storage of the most important battery data on 

the BID-Chip/Key 

• Naturally, the Power Peak triple Charger can 

charge batteries not fitted with BID-System 

• 1 BID-Chip is included with the charger. 

Functions, for all 3 outputs 

• Discharge/charge 1 x 

• Display of charged and discharged capacity 

• Display of the input and charge voltage 

• Equalizer display- shown as a single cell 

voltage, Functions: with a choice of summary 

(to 2 decimal points) or as a list function to 3 

decimal points (1/1000 Volt) resolution 

• 10 internal battery data memories 

NiCad/NiMH-batteries 1…14 cells 

• The digital Delta-Peak-automatic cut-off 

switches off the charge process at the correct 

point in time and is set for NiCad- and 

NiMH-batteries. 

Lithium-batteries 1…6 cells LiIo (3.6V) or 

LiFe (3.3V) 

• Display of single cell voltages of Lithium 

battery packs 

• Automatic cut-off using the CC-CV-charge 

method 

Lead batteries 1…6 cells (2...12Volt) 

• Automatic Cut off using the CC-CV-charge 

method 

Charge current with cell count of: 

6S = 2.5...2 A 


Input voltage 

11-15 Volt-DC 

No. of cells 

1-14 NC / NiMH 

 

1-6 LiIo (3.6 V), 

LiPo (3.7 V) or LiFe (3.3 V) - 9.9 Ah 

1-6 PB / Lead-Acid 20 Ah 

Charge current 3 x 0.1-5 A (120W) 

Discharge current 3 x 0.1...1 A (5W) 

Charge termination 

Automatic 

Dimensions 

270 x 160 x 50 mm 

Equalizer current approx. 250 mA 



1x 8539 







Voltage sensor cable 7-P. 0.2qmm 1x 4021

Detail display of individual cell voltages: 

resolution to one thousandth of a volt. 

Set contents 

1 Power Peak ® QUAD charger 

1 BID-CHIP with connecting lead 

1 Equalizer Adapter PQ 

1 Equalizer Adapter XH 

1 Equalizer Adapter TP 

Summary of individual cell voltages: 

resolution to one hundredth of a volt. 

NN96

Power Peak ® Quad EQ-BID 4x50W 12V No. 8565 

Compact Power-Peak ® QUAD 

charge-discharge station with 

battery management for 4 x 

1…14 cell NiCad/NiMH batteries, 

4 x 1…6 cell LiIo, LiPo or LiFe 

batteries, as well as 4 x 2...12V 

lead-acid batteries. With 4 

integrated Equalizers and 

BID-Systems. 

The QUAD 4-output Universal-Charger, a 

compact charging unit for all who need to 

charge many batteries at the same time from 

a mobile 12 V DC source. 

The charger‘s wide charge current range of 

0.1 to 5 A makes it suitable for small slow-fly 

models, transmitter and receiver batteries, 

and also for large surface and flight packs. 

Each charging circuit has its own backlit 

LCD, as well as an Equalizer and BID 

connector. Simultaneous, but fully independent 

charging of 4 batteries. Of course the 

charging of one battery type (4x LiPo), as 

well as other battery types (NiCad, NiMH, 

LiFe and LiPo), can be made simultaneously 

and independent from each other. 

By connecting it to a robbe SPS-Mains 

Power Supply, the charge station can also 

be used at home, powered by the mains. 

Clear display of charge parameters and 

battery data on the large, blue, backlit 2 x 16 

character LCD screen. Menu operation 

available to select from english, german and 

french languages. 



cells during the charging process. The Equalizer 

current is approximately 280 mA and is 

sufficient also for batteries with a capacity of 

5Ah. 

Simple, secure operation and automatic 

storage of the essential battery data in the 

robbe BID system. (Battery-IDentification- 

System. 

The special advantage: 

• Simply plug the BID-Key into the charger 

and the charge process begins. 

• No tiresome adjustments of charge 


• Maximum protection against incorrect 

operation 

• Storage of the most important battery data 

on the BID-Chip/Key 

• Naturally, the Power Peak ® QUAD Charger 

can charge batteries not fitted with 

BID-System 

• 1 BID-Chip is included with the charger. 

Functions: for each of the 4 available 

outputs 

• Discharge/charge 1 x 

• Display of charged and discharged 

capacity 

• Display of the input and charge voltage 

• Equalizer display- shown as a single cell 

voltage, Functions: with a choice of 

summary (to 2 decimal points) or as a list 

function to 3 decimal points (1/1000 Volt) 

resolution 

• 10 internal battery data memories 

NiCad/NiMH-batteries 1…14 cells 

• The digital Delta-Peak-automatic cut-off 

switches off the charge process at the 

correct point in time and is set for NiCadand 

NiMH-batteries. 

Lithium-batteries 1…6 cells 

LiIo (3.6V), LiPo (3.3V) up to 9.9 Ah 

• Display of single cell voltages of Lithiumbattery 

packs 


method 

Lead batteries up to 20Ah 

• 1…6 cells (2...12Volt) 


method 

Charge current with cell count of: 

3S = 5...3,9A 

6S = 2.5...2 A 


Input voltage 


Discharge current 

Dimensions 

11...15V DC 

4 x 0.1...5 A 

4 x 0.1...1 A 

225 x 170 x 40 mm 



1x 8539 








 

 

 

 

 

NN97

Switches / controllers 

ROXXY ®® -BL-Control 810 No. 8645 

 

Robust and compact BL-Controller with high operating 

frequency for small In- and Outdoor models. 

High operating frequency for fine control feel when hovering in 3D 

flight. Performance oriented Power end stage suitable for full-throttle 

operation up to 6 minutes. Powerful 1.5 A BEC stage also suitable 

for Outdoor use. Intermittent load up to 15 A. With automatic low 

voltage cut-off. 

Functions: Forwards-Stop-Brake 

 

ROXXY ®® -BL Control 820 No. 8646 

 

Compact and inexpensive ROXXY ®® -BL-Controller with high 

operating frequency for Outdoor models with high current 

drain. 

High operating frequency for fine control feel when hovering in 3D 

flight. Fitted with Power end stage suitable for full-throttle operation 

up to 6 minutes. Particularly powerful 3 A BEC-stage highly suitable 

for Outdoor and models with more than 4 servos. 

Intermittent load upto 25 A. With automatic low voltage cut-off. 

Functions: Forwards-Stop-Brake 

 

 


No. of cells 

6 - 10 NC/NiMH, 2 - 3 LiPo. 

Load current 10 A 

Peak current 15 A 

Dimensions 28 x 23 x 8 mm 

Weight approx. 13 g 

BEC 5V max. 1.5A 

Pulse frequency 32 kHz 

Protective functions PCO, POR, TP 

 


No. of cells 

Load current 

Peak current 

Dimensions 


BEC 

Pulse frequency 

Protective functions 

6 - 10 NC/NiMH, 2 - 3 LiPo. 

20 A 

25 A 

28 x 23 x 8 mm 

18 g 

5V max. 3A 

32 kHz 

PCO, POR, TP 

NN98

Switches / controllers 

ROXXY ®® -BL- Control Micro 6A No. 8647 

 

Very small, lightweight but still high-performance BL speed 

controller for Indoor models. 

High operating frequency for a unique fine control feel 

Features: 

• Brake switched on or off 

• programmable low voltage cut-off for LiPo and Nx batteries 

• Power-On-Reset 

• programmable motor start type: Normal / Soft / Super-Soft 

• programmable motor timing (2-8-14-pole motors) 

• Powerful BEC stage with 5V / 0.8A 

ROXXY ®® -BL- Control Micro 10 A No. 8648 

 

Small, lightweight but still high-performance BL speed controller 

for Indoor and Slowfly models. 

High operating frequency for a unique fine control feel Wide voltage 

range from 2...4 LiPo cells. 

Features: 

• Brake switched on or off 

• programmable low voltage cut-off for LiPo and Nx batteries 

• Power-On-Reset 

• programmable motor start type: Normal / Soft / Super-Soft 

• programmable motor timing (2-8-14-pole motors) 

• Powerful BEC stage with 5V / 1A 

 


 

 



6... 8.4 Volt 


6... 16.8 Volt 

No. of cells 

4...5 NC/NiMH, 2S-LiPo 

No. of cells 

5...12 NC/NiMH / 2-4S-LiPo 

Load current 

6 A 

Load current 

10 A 

Peak current 

8 A 

Peak current 

12 A 

Dimensions 

24 x 12 x 6 mm 

Dimensions 

27 x 17 x 6 mm 


6 g 


9 g 

BEC 

5 V / 0.8 A 

BEC 

5V / 1A 


10 kHz 


10 kHz 


PCO, POR 


PCO, POR 

NN99

S-Bus accessories 

HUB-2 lead, 0.5 mm², 10 cm 

No. 88820010 


No. 88820030 


No. 88820050 


No. 88820080 

HUB-2 lead, 0.5 mm², 120 cm 

No. 88820120 

The aerospace proven gold contact 

connectors result in a small and light plug 

connection and provide 6 A continuous (12A 

intermittent), more than sufficient current 

carrying capacity for the majority of models. 

The HUB-2-leads are available in lengths 

from 10…120 cm. 

Which also may be used as inexpensive and 

heavy-duty Y-leads for standard PWM-servos 

and speed controllers. 

The heavy-duty switch harness 6 A (12 A) 

No. 8891, as well as ready-made NiMH- and 

LiPo-receiver battery packs are suitable and 

available for this Futaba high-current wiring 

system. 

 


No. 88830030 


No. 88830050 

HUB-3 lead, 0.5 mm², 80 cm 

No. 88830080 

HUB-3 lead, 0.5 mm², 120 cm 

No. 88830120 

The aerospace proven gold contact 

connectors result in a small and light plug 

connection and provide 6 A continuous (12A 

intermittent), more than sufficient current 

carrying capacity for the majority of models. 

A HUB-3 lead will be plugged directly into 

the S-BUS receiver output. 

From this 3-way node, the HUB-2 or HUB-3 

leads will create the S-BUS-connections to 

both wing panels and also to the tail, namely, 

elevator and rudder. 

The HUB-3-leads are available in lengths 

ranging from 30…120 cm. 

The power supply is made via the receiver 

connection using a switch harness 6 A No. 

8891 as well as ready-made NiMH- and 

LiPo-receiver battery packs. 

HUB-4 CABLE with high-current 

connector No. 8884 

 

Power hungry servos will be connected 

directly to the HUB-4 and power provided 

from the unit. Smaller servos with a lower 

power requirements will be connected 

directly to the receiver. 

From the the output side, 2 HUB-2 or HUB-3 

leads are provided for the wing panels, 

elevator and rudder servos will be connected 

via an additional, long HUB-2 lead. 

Other S-BUS servos, such as nosewheel 

and tow release servos can be connected to 

the remaining connections. 

The power supply is made via the switch 

harness 8A, a Limiter or a dual power 

supply. A compact solution to the S-BUS 

wiring, which is very powerful and sufficient 

for a continuous current load of 8A (16A 

intermittent) to suit the majority of models. 

Power distribution and receiver will be 

separated within the model, in this manner, 

whereby the receiver may be located at the 

optimum reception point, for example within 

the canopy and the remaining wiring can be 

placed well within the fuselage. 

A large range of ready-made NiMH and LiPo 

receiver battery packs, already fitted with the 

30A hotmelt-sealed heavy-duty plug, are 

available for the HUB-4 S-BUS-System. 


Dimensions 

40 x 14 x 16 mm 

NN100


HUB-4.1 fitted with high-current/ 

wing connector No. 88841000 

 

S-BUS 4-way distribution unit with wing 

connector and stabilised receiver power 

supply. 

Compact, S-BUS distribution unit fitted with 

all connectors. The connection to the 

receiver is made via 50 cm long lead, the 

voltage is stabilised to 5.9V volts. 

The wing connection is made via a 50 cm 

long 1mm² lead with lockable wing joiner 

plugs. For models with thin wing sections, 

the wing socket will be replaced with 2 servo 

connector leads. Different lead lengths of 

30/50 cm for power models as well as for 

models with a short wing span and also 

50/130 cm for gliders with 4…5 m wingspan 

are available. Using the HUB-2 lead, the 

connection of further servos can be made. 

Alternatively, the S-BUS wing mounted 

socket with 1mm² connector-lead can be 

used for models with a thicker wing profile. 

The servo connection is made here using 

the solder-free S-BUS clamp connectors. 

Servos can be connected safely in all wing 

panels without resorting to soldering. 

A total of up to 10 S-BUS-Servos can be 

directly connected to the HUB4.1, further 

small servos with lower current needs can 

be connected direct to the S-BUS-receiver. 

Elevator and rudder servos will be connected 

using the 120 cm long HUB-2 lead, 

further servos will be connected via the additional 

HUB-2 distribution unit. 

The power supply is made via a standardised 

heavy-duty plug (30A) with hotmeltsealed 

connector. Either via the heavy-duty 

switch harness No. 8892, or alternatively via 

a commercially available Limiter or a dual 

power supply. 

Power distribution and receiver will be 

separated, in this manner, within the model, 

whereby the receiver may be located at the 

optimum reception point, for example within 

the canopy and the remaining wiring can be 

placed well within the fuselage. 

A large range of ready-made NiMH and LiPo 

receiver battery packs, already fitted with the 

30A hotmelt-sealed heavy-duty plug, are 

available for the HUB-4.1 S-BUS-System. 

PSS S-BUS terminal block 

 

No. F1690 

 

S-BUS-Terminal block for PSS-battery backer. 

Core element of the S-BUS system is the cable 

terminal block. An S-BUS servo can be installed 

at any convenient point along the length of the 

cable. Simply feed the cable between the upper 

and lower halves of the terminal block, press the 

two halves together to close the housing and lock 

the cable in position. 

The clamped terminal creates a reliable power 

and signal connection to the PSS- battery backer 

and receiver. Allocate the servo its relevant 

channel address, and the servo connection is 

done! 

 

PSS S-BUS terminal block with 

PWM adapter 

No. F1691 

 

S-BUS-Terminal block with PWM-converter 

for PSS-battery backer. 

This S-BUS terminal block serves to connect 

normal analogue- and also digital servos 

with PWM control. The terminal block has an 

additional printed circuit board which 

converts the S-BUS signal to a PWM one. 

Hence a standard servo can be connected 

at any required point along the BUS cable. 

The PWM adapter neds to be configured 

with the channel address with this connection 

and the servo connection is done. 

The channel allocation is made with the 

handy S-BUS programmer SBC-1. 

 

NN101


6A switch harness with 

charging socket No. 8891 

 

Switch harness with charge socket and a 

current rating of 6A continuous, 12A 

intermittent. Silicone stranded wire 0.5 mm². 

Heavy-duty switch harness 8 A 

with charge socket. No. 8892 

 

Heavy-duty switch harness 8 / 16 A, 

complete and ready-made with 1mm² 

leads and hotmelt-sealed high current 30 

A plugs and sockets. 

Well proven biased high-current capable 

switch. The pin operates an integrated, high 

current capable and failsafe electronic on/off 

switch. The ultra bright red LED serves as 

switch on monitor. Continuous current: 8 A, 

Peak current 20 A. Supplied with mounting 

screws. 


Dimensions 


46 x 26 x 19 mm 

30 g 

 

Heavy-duty plug, Hotmelt, 

1mm², 30c No. 8584 

 

1mm² connector lead with 30 A heavy-duty 

plug. Hotmelt sealed. 

Length approx. 30 cm. 

 

High current socket, Hotmelt 

1mm², 30cm No. 8585 

 

1mm² connector lead with 30 A heavy-duty 

socket. Hotmelt sealed. 

Length approx. 30 cm. 

 

Battery Lead Futaba 6A, 20 cm, 

0.5 mm No. 8586 

 

High current battery connector lead Futaba 

6/12A, silicone wire 0.5 mm². 

Length 20 cm. 

 

NN102


Charge lead gold 3.5 mm 

30 cm No. 8256 

 

To charge batteries fitted with 3.5 mm gold 

connectors. Cross sectional area 0.75 mm² 

 

S-BUS - Futaba adapter socket 

 

No. F1693 

 

Adapter lead from USB-Adapter CIU2 to 

S-BUS wing plug connection. 

To address and program the wing-mounted 

S-BUS servos. 

S-BUS - Futaba adapter plug 

 

No. F1694 

 

Adapter lead from USB-Adapter CIU2 to 

S-BUS wing socket connection. 

To address and program the wing-mounted 

S-BUS servos. 

 

Wing socket for 2 servos 

50/130 cm No. 88840002 

 

Wing socket with connections for 2 

S-BUS servos. 

Wing connection socket suitable for HUB-4.1 

distribution unit. The socket will be let into 

the wing root and screwed into position. 

High-quality, polarity protected and latching 

3 pole gold plug and socket connection. 

Secure contact, but still easy to assemble 

and dissemble. Lead length 50 und 130 cm. 

 

Wing socket for 2 servos 

30/50 cm No. 88840003 

 

Wing socket with connections for 2 

S-BUS servos. 

Wing connection socket suitable for HUB-4.1 

distribution unit. The socket will be let into 

the wing root and screwed into position. 

High-quality, polarity protected and latching 

3 pole gold plug and socket connection. 

Secure contact, but still easy to assemble 

and dissemble. Lead length 30 und 50 cm. 

 

NN103

Receiver batteries 

Power Pack 4NiMH 2000 Flat 

(6A) No. 4218 

 

Receiver battery with Futaba 6A plug. 



Load current 

Load current, Peak : 

Dimensions 


Capacity 

Voltage 

max. 2 A 

4 A 

6 A 

58 x 52 x 15 mm 

130 g 

2000 mAh 

4.8 V 


(6A) No. 4221 

 




Load current 


Dimensions 


Capacity 

Voltage 

max. 2 A 

4 A 

6 A 

72 x 52 x 15 mm 

161 g 

2000 mAh 

6 V 

Power Pack 4NiMH 2000 ENEL. 

6A Flat No. 4219 

 




Load current 


Dimensions 


Capacity 

Voltage 

max. 2 A 

4 A 

6 A 

57 x 52 x 15 mm 

114 g 

2000 mAh 

4.8 V 

Power Pack 5NiMH 2000 ENEL. 

6A Flat No. 4222 

 




Load current 


Dimensions 


Capacity 

Voltage 

max. 2 A 

4 A 

6 A 

71 x 52 x 15 mm 

140 g 

2000 mAh 

6 V 

NN104



(6A) No. 4220 

 

Rx battery 3500 mAh, extremely high 

capacity, good voltage range and 

stability. Charge max. 3.5 A. Discharge, 

continuous 6A, intermittent bis 12A. 



Load current 


Dimensions 


Capacity 

Voltage 

max. 3.5 A 

6 A 

12 A 

88 x 46 x 23 mm 

273 g 

3500 mAh 

4.8 V 


(6A) No. 4223 

 



stability. Charging max. 3.5A. Discharging, 

continuous 6A, short periods up to 

12A. 



Load current 


Dimensions 


Capacity 

Voltage 

max. 3.5 A 

6 A 

12 A 

115 x 44 x 23 mm 

341 g 

3500 mAh 

6 V 

Power Pack 4NiMH 4200 Fl (6A) 

No. 4231 

 



stability. Charging max. 4A. Discharging, 

continuous 6A, short periods up to 12A. 

Power Pack 4 NiMH 4200 mAh, flat. With 

Futaba 6A plug 



max. 4 A 

Load current 

6 A 


12 A 

Dimensions 

99 x 47 x 22 mm 


280 g 

Capacity 

4200 mAh 

Voltage 4.8V 

Power Pack 4 NiMH 3500 (8A) 

No. 4210 

 

Receiver battery 3500 mAh with highcurrent 

plug. 

Suitable for HUB-4 and 4.1 S-BUS-System 

or other high-current applications. 



Load current 


Dimensions 


Capacity 

Voltage 

max. 3.5 A 

30 A 

50 A 

88 x 46 x 23 mm 

279 g 

3500 mAh 

4.8 V 

Power Pack 5 NiMH 3500 (8A) 

No. 4211 

 

Receiver battery 3500 mAh with highcurrent 

plug. 





Load current 


Dimensions 


Capacity 

Voltage 

max. 3.5 A 

30 A 

50 A 

115 x 44 x 23 mm 

347 g 

3500 mAh 

6 V 

NN105


ROXXY ® Power Pack 

2S 1500 mAh (6A) No. 4224 

 


Suitable for HUB-2+3 S-BUS-System or 

other high-current applications. 



1.5...6A 

Load current 

6 A 


12 A 

Dimensions 

100 x 35 x 11 mm 


83 g 

Capacity 

1500 mAh 

Voltage 7.4V 


2S 2200 mAh (6A) No. 4225 

 






2.2...6A 

Load current 

6 A 


12 A 

Dimensions 

103 x 35 x 15 mm 


117 g 

Capacity 

2200 mAh 

Voltage 7.4V 


2S 2700 mAh (6A) No. 4226 

 






2.7...6A 

Load current 

6 A 


12 A 

Dimensions 

132 x 45 x 11 mm 


153 g 

Capacity 

2700 mAh 

Voltage 7.4V 

NN106



2S 1500 mAh (8A) No. 4212 

 

LiPo receiver battery 2S 1500 mAh with 

high-current plug. 





1.5...6A 

Load current 

30 A 


50 A 

Dimensions 

100 x 35 x 11 mm 


85 g 

Capacity 

1500 mAh 

Voltage 7.4V 


2S 2200 mAh (8A) No. 4213 

 


high-current plugROXXY ® Power Pack 

2S2200 mAh (8A) 





2.2...8A 

Load current 

30 A 


50 A 

Dimensions 

103 x 35 x 15 mm 


120 g 

Capacity 

2200 mAh 

Voltage 7.4V 


2S 2700 mAh (8A) No. 4214 

 







2.7...10.8 A 

Load current 

30 A 


50 A 

Dimensions 

132 x 45 x 11 mm 


158 g 

Capacity 

2700 mAh 

Voltage 7.4V 


2S 3300 mAh (8A) No. 4215 

 







3.3...13A 

Load current 

30 A 


50 A 

Dimensions 

134 x 45 x 14 mm 


186 g 

Capacity 

3300 mAh 

Voltage 7.4V 

NN107

RC accessories 

Voltage sensor cable 8-P. 

0.2qmm No. 4797 

Voltage sensor cable 9-P. 

0.2qmm No. 4798 

 

Single connector leads for the JST-EHR plug 

system. For self-assembly of Lithium 

batteries. 

Suitable for the robbe chargers and 

equalizers. Compatible with Graupner and 

Kokam. 

For the charging process, an Equalizer is 

connected to the Voltage Sensor connector 

to balance each cell. 

Each cell will be checked for maximum 

voltage and if necessary, the charge process 

will be stopped to avoid overcharging. 

The voltage sensor connector is useful also 

in practical use (discharging),by connecting 

the MC-Balancer ( No. 8636 (7S) or No. 

8643 (14S) the individual cells can be 

checked for low voltage and, where 

necessary, reduces the discharge current to 

avoid a deep discharge and damage to the 

lithium cells. 

 

NN108 

Heavy-duty charge-lead 30A 

No. 8893 

 

Heavy-duty charge-lead with 4mm gold 

connectors and 30 A hotmelt plug. To 

charge batteries fitted with 30A heavyduty 

socket. Length approx. 30 cm, Ø 

1mm². 

 

Adapter 8S -> 2 x 4 S EHR 

No. 4663 

 

Equalizer Adapter robbe-EHR 8S to robbe 

EHR 2 X 4S. 

Primarily designed for the Power-Peak ® 

chargers, Duo Power and C8. For simultaneous 

connection of 2 x 4, 2 x 3 or 2 x 2 S LiPo 

batteries to the Equalizer port. 

GY520 - HC3-X connecting lead, 

500 mm No. 4096 

 

S-BUS connecting lead for GY520, HC3-X 

gyro, etc. Length 500 mm 

 

 

 

 

GO 6 plugs (10 pieces) 

No. 8164 

 

Heavy-duty connector for currents over 

50 A 

 

 

 

 

GO 6 socket (10 pieces) 

No. 8165 

 

Heavy-duty connector for currents over 

50 A 

 

 

 

BL-motors 

ROXXY ® BL outrunner C28-12-46 1720 kv No. 4991 

Edge / Su-29 power set No. 4668 

 

ROXXY ® BL power set for the Edge and 

SU-29 indoor aerobatic models. 

Optimised for powering both models in 

conjunction with a 2S LiPo battery and GWS 

8 x 4.3 propeller 

Can also be used to power other indoor 

aerobatic models weighing up to about 160 

g, and for power models up to about 250 g 

and gliders up to about 300g. 

Set contents 

Power set consisting of ROXXY ® C28-12-46 

BL motor and ROXXY ® Micro 10A BL speed 

controller. Speed controller - motor unit, 

pre-wired, with Futaba receiver connector. 


Voltage 

7 ... 9 Volt 

No. of Li cells 2 

No-load speed 1720 

Load current (5min/120˚C) 

6.2 A 

Max. load current (60 secs) 

8.8 A 

Dimensions 

28 Ø x 12 mm 


28 g 

Shaft diameter 

2 mm 

Aircraft propeller GWS 8 x 4.3“ (20 x 11) 

Power (W) 

43.4 W 

Lightweight, high-performance 

BL motor for indoor aerobatics. 

Optimised motor for indoor aerobatic models 

weighing up to about 160 g. Can also be 

used with indoor power models up to about 

250 g and powered gliders up to about 300 

g. Designed for 2S LiPo battery, recommended 

propeller 8 x 4.3“ GWS. 

 


Voltage 

7 ... 9 Volt 




6.2 A 


8.8 A 

Dimensions 

28 Ø x 12 mm 


20 g 


2 mm 

Aircraft propeller GWS 8 x 4.3“ (20 x 11) 

Power (W) 

43.4 W 

The following data are static measurements. 


ROXXY ® -BL- Control Micro 10 A 1x 8648 

 

 

 

Voltage (V) Li-cells Propeller Rpm Load cur. (A) Thrust (g) 

7,1 2S-LiPo 8 x 4,3 GWS 6.800 7,8 210 

NN109

Navy BL motors 

ROXXY ® C22-16-15 BL outrunner, 

800 kv No. 4986 

Modern 14-pole ROXXY ® BL 

outrunner motor for model 

boats. 

This motor requires no gearbox due to its 

construction. It is a highly efficient, hightorque 

motor with a broad power spectrum, 

designed to drive large boat propellers. 

Ideal for direct-drive applications. 

• High efficiency due to maximum copper fill 

and the use of high-quality Neodymium 

magnets. 

• Precision ballraces for free-running 

characteristics. 

 

Application: 

Model boats up to around 600 g 

Replaces Mini-Navy Kompakt geared motor 

 

Voltage (V) Li-cells Boat propellers Load cur. (A) Thrust (g) 

11,1 3S-LiPo 30 mm 3-blade 1,3 190 


Voltage 

10 ... 25 Volt 

No. of Li cells 3 - 6 



3 A 


5.3 A 

Dimensions 

22 Ø x 15 mm 


19 g 


2 mm 

Power (W) 

45 W 


Centring Coupl. Waist 1x 1696 

Centring Coupl.Shaft Driver D 2mm 1Pcs 

1x 1697 

ROXXY ® Bl Outrunner 2220/20 

No. 4949 

Modern, all-purpose 14-pole 

ROXXY ® BL outrunner motor for 

small model aircraft and boats. 

This model requires no gearbox due to its 



designed to drive fairly large aircraft and 

boat propellers. 




magnets. 



• Can be mounted at either end (model 

aircraft only) 

Applications: 

For electric gliders up to 500 g 

Scale and sport models up to about 400 g 

Aerobatic and 3D-models up tzo about 200 g 

Model boats up to about 600 g 

Substitute for the Mini-Navy Kompakt geared 

motor 

 


Voltage 

7-12 Volt 

No. of Li cells 2-3 



8 A 


10 A 

Dimensions 

22 x 20 mm 


28 g 


2 mm 

Free shaft length 

11 mm 

Powe 

60 W 



Centring Coupl.Shaft Driver D 2mm 1Pcs 

1x 1697 

 


7,4 2S-LiPo 30 mm 3-blade 2,3 (A) 230 

NN110


ROXXY ® Bl Outrunner 2824/34 

No. 477834 



aircraft and boats. 

This model requires no gearbox due to its 



designed to drive fairly large aircraft and 

boat propellers. 




magnets. 



• Can be mounted at either end (model 

aircraft only) 

 


7,2 2S-LiPo 30 mm 3-blade 1,8 250 

11,1 3S-LiPo 30 mm 3-blade 2,8 350 

Applications: 

Model boats up to about 1500 g 

Substitute for the Mini-Navy Kompakt geared 

motor 

 


Voltage 

7-12 Volt 




8 A 


9 A 

Dimensions 

Ø 28,8 x 26 mm 


48 g 


3.17 mm 


12.6 mm 

Max. efficiency 79 % 

Power (W) 

90 W 


Navy Direct Clutch D3,1/4 /12X17 1x 1447 

Centr.Coupl.Shaft Driver D:3.17mm 1Pcs 

1x 1698 


Navy Direkt Flange 18/3,17 1x 1593 

ROXXY ® BL outrunner C 28-26- 

21 800 kv No. 4987 



boats. 




designed to drive large boat propellers. 




magnets. 



Application: 


Replaces Mini-Navy Kompakt geared motor 

 


Voltage 

10 ... 25 Volt 




6 A 


8 A 

Dimensions 

28 Ø x 23 mm 


45 g 


3.17 mm 

Power (W) 

120 W 


Navy Direct Clutch D3,1/4 /12X17 1x 1447 

Centr.Coupl.Shaft Driver D:3.17mm 1Pcs 

1x 1698 


Navy Direkt Flange 18/3,17 1x 1593 

 


11,1 3S-LiPo 30 mm 3-blade 1,9 300 

NN111


ROXXY ® BL outrunner C 35-29 

800 kv No. 4988 

ROXXY ® BL outrunner C35-29 

500 kv No. 4989 



boats. 




capable of driving large boat propellers. 




magnets. 



ROXXY ® BL outrunner C 35-29 800 kv 

Application: 

Model boats weighing 2000 … 6000 g 

Replaces the Navy Kompakt geared motor 


Voltage 

7 ... 12 Volt 




13 A 


18 A 

Dimensions 

35 Ø x 29 mm 


78 g 


4 mm 

Power (W) 

130 W 


Navy Direkt Flange 18/4 1x 1595 

Power Heavy Duty Clutch 1x 1446 

Navy-Direct-Coupl. D4 /4 /12X17 1x 1495 

Centring Coupl.Shaft Driver D:4mm 1Pcs 

1x 1699 


ROXXY ® BL outrunner C 35-29 800 kv No. 4988 


7,2 2S-LiPo 35 mm 3-blade 3,6 800 

7,2 2S-LiPo 40 mm 3-blade 4,2 900 

ROXXY 

® BL outrunner C35-29 500 kv No. 4989 


11,1 3S-LiPo 40 mm 3-blade 2,5 650 

12 3S-LiPo 50 mm 3-blade 5,5 1250 

ROXXY ® BL outrunner C35-29 500 kv 

Application: 

Model boats weighing 2000 … 6000 g 

Replaces Navy Kompakt geared motor 

 


Voltage 

10 ... 12 Volt 




10 A 


13 A 

Dimensions 

35 Ø x 29 mm 


78 g 


4 mm 

Power (W) 

130 W 





Centring Coupl.Shaft Driver D:4mm 1Pcs 

1x 1699 


NN112


ROXXY ® BL outrunner C35-30- 

45 300 kv No. 4990 



boats. 




capable of driving very large boat propellers. 




magnets. 



 


12 3S-LiPo 60 mm 3-blade 2,8 750 

Application: 


Replaces Navy Kompakt geared motor 

 


Voltage 

10 ... 25 Volt 




7 A 


10 A 

Dimensions 

35.3 Ø x 30.5 mm 


78 g 


4 mm 

Power (W) 

140 W 

 





NN113

BL helicopter motors 

ROXXY ® BL outrunner F29-28-19 Heli 3600 kv No. 6960 



High-performance upgrade 

motor of the ROXXY ® Heli BL 

outrunner series. 

ROXXY ® BL outrunner F29-28-19 Heli 

3600 kv 

8-pole helicopter BL upgrade motor for 

helicopters of the T-Rex 250 size. With 

integral fan for optimum cooling. 

 


Voltage 

6 ... 20 Volt 




75 A 

Dimensions 

29 Ø x 28 mm 


62 g 


2 mm 


3600 kv 

8-pole 

 

helicopter BL upgrade motor for 



 


Voltage 

6 ... 20 Volt 




85 A 

Dimensions 

29 Ø x 35 mm 


84 g 


3.17 mm 


1650 kv 




 


Voltage 

10 ... 25 Volt 



Max. load current (60 secs) 110 A 

Dimensions 

35 Ø x 50 mm 


190 g 


5 mm 

NN114 

 

BL helicopter motors 

ROXXY ® Bl Outrunner F42-51-14 Heli 1250 kv No. 6963 


High-performance upgrade motor of 

the ROXXY ® Heli BL outrunner series. 

ROXXY ® Bl Outrunner F42-51-14 Heli 1250 

kv 




 


Voltage 

15 ... 30 Volt 




Dimensions 

42 Ø x 51 mm 


260 g 


6 mm 

 

 


1000 kv 


helicopters of the 4S Stretch Version size. 

With integral fan for optimum cooling. 

 


Voltage 

20 ... 40 Volt 




95 A 

Dimensions 

42 Ø x 51 mm 


270 g 


5 mm 

 

 

NN115

BL-motors 

ROXXY ® BL outrunner D35-50- 

06 850 kv No. 4995 


05 1150 kv No. 4996 

Modern BL outrunner motor 

with Neodymium magnets. 

New 14-pole ROXXY ® BL D-series outrunner 

motor, with triple ballraces. To improve 

true-running and precision, D-series motors 

are fitted with a third ballrace known as a 

thin-ring race. This prevents the motor bell 

distorting under load, and ensures smooth 

running. These motors require no gearbox 

due to their construction. They are highly 

efficient, high-torque motors with a broad 

power spectrum, capable of driving large 

propellers. 



magnets. 



• Can be mounted at either end. 

Application: 

For electric gliders up to about 3200 g 


Aerobatic and 3-D models up to about 

1800 g 

 

ROXXY ® BL outrunner D35-50-06 850 kv 


Voltage 

7 ... 20 Volt 

No. of Li cells 3 ... 5 



50 A 


65 A 

Dimensions 

35 Ø x 50 mm 


152 g 


4 mm 

Power (W) 

700 W 

 

ROXXY 

® BL outrunner D35-50-05 1150 kv 


Voltage 

7 ... 20 Volt 




38 A 


45 A 

Dimensions 

35 Ø x 50 mm 


152 g 


4 mm 

Power (W) 

480 W 

 

 

BL outrunner shaft and fan 

D35-50 No. 466935 

 

Shaft and 35 mm Ø fan, for retro-fitting fan 

cooling to D-35-50 series motors. Shaft 

length: 56.5 mm 

 

NN116

BL-motors 

ROXXY ® BL outrunner D35-50-06 850 kv No. 4995 

Voltage 

(V) 

Li-cells 

Imax (A) 

(5 min) 

Propeller 

Efficiency 

(%) 

Rpm 

Load cur. 

(A) 

Thrust 

(g) 

7,0 2 50 17 x 8 APC_E 64% 3.969 36,3 1.692 

7,0 2 50 17 x 10 APC_E 60% 3.686 41,2 1.583 

10,5 3 50 11 x 10 APC_E 71% 6.882 37,7 1.336 

10,5 3 50 12 x 10 APC_E_v2 71% 6.816 38,8 1.304 

10,5 3 50 12 x 10 APC_E 70% 6.661 41,6 1.242 

10,5 3 50 13 x 6,5 APC_E 72% 7.017 35,3 1.665 

10,5 3 50 13 x 8 APC_E 71% 6.880 37,7 1.911 

10,5 3 50 14 x 7 APC_E 70% 6.664 41,5 2.078 

10,5 3 50 14 x 8,5 APC_E 69% 6.600 42,7 1.969 

14,0 4 50 10 x 8 Aeronaut_E_Prop 79% 9.656 34,8 1.621 

14,0 4 50 10 x 10 APC_E 76% 9.265 40,5 1.590 

14,0 4 50 11 x 7 APC_E 78% 9.500 37,1 2.062 

14,0 4 50 11 x 8,5 APC_E 76% 9.271 40,4 2.156 

14,0 4 50 11 x 8 APC_E 76% 9.227 41,0 1.808 

14,0 4 50 12 x 6 APC_E 76% 9.236 40,9 2.421 

14,0 4 50 13 x 4 APC_E 78% 9.506 37,0 2.612 

17,5 5 50 9 x 7,5 APC_E 81% 12.371 36,5 2.019 

17,5 5 50 9,5 x 7 Aeronaut_E_Prop 82% 12.544 34,1 1.922 



Voltage 

(V) 

Li-cells 

Imax (A) 

(5 min) 

Propeller Efficiency (%) Rpm Load cur. 

(A) 

Thrust 

(g) 

7,0 2 38 10 x 8 Aeronaut_E_Prop 75% 6.813 25,6 807 

7,0 2 38 10 x 10 APC_E 75% 6.560 30,5 816 

7,0 2 38 11 x 7 APC_E 75% 6.788 26,0 1.002 

7,0 2 38 11 x 8,5 APC_E 75% 6.728 27,2 1.049 

7,0 2 38 11 x 8 APC_E 75% 6.634 29,0 958 

7,0 2 38 12 x 6 APC_E 75% 6.683 28,1 1.204 

7,0 2 38 12 x 8 APC_E 74% 6.440 32,8 1.251 

7,0 2 38 13 x 4 APC_E 75% 6.788 26,0 1.246 

10,5 3 38 8 x 8 APC_E 79% 10.353 31,7 955 



10,5 3 38 10 x 5 APC_E 79% 10.392 31,1 1.576 



NN117

BL-motors 


04 900 kv No. 4997 


06 590 kv No. 4998 




motor, with triple ballraces. To improve 






due to their construction. 

These are highly efficient, high-torque 

motors with a broad power spectrum, 

capable of driving large propellers. 



magnets. 




Application: 

For electric gliders weighing up to about 

3200 g 


Aerobatic and 3-D models up to about 

1800 g 

 



Voltage 

7 ... 15 Volt 




45 A 


60 A 

Dimensions 

35 Ø x 55 mm 


175 g 


4 mm 

Power (W) 

750 W 

 

 



Voltage 

7 ... 20 Volt 




35 A 


45 A 

Dimensions 

35 Ø x 55 mm 


175 g 


4 mm 

Power (W) 

700 W 

 

 

NN118 

BL outrunner shaft and fan 

D35-55 No. 46693555 

 




 

 

BL-motors 


Voltage (V) Li-cells Imax (A) (5 min) Propeller Efficiency (%) Rpm Load cur. (A) Thrust (g) 

7,0 2 45 12 x 10 APC_E 75% 5.394 29,7 796 

7,0 2 45 12 x 12 APC_E 73% 5.178 35,1 1.000 

7,0 2 45 13 x 10 APC_E 74% 5.276 32,6 1.032 

7,0 2 45 14 x 7 APC_E 75% 5.376 30,1 1.307 

7,0 2 45 14 x 8,5 APC_E 74% 5.358 30,6 1.298 

7,0 2 45 14 x 10 APC_E 72% 5.026 38,9 1.272 


10,5 3 45 10 x 10 APC_E 80% 8.247 36,7 1.270 


10,5 3 45 11 x 7 APC_E 81% 8.440 32,4 1.600 

10,5 3 45 11 x 8,5 APC_E 81% 8.317 35,1 1.689 

10,5 3 45 11 x 8 APC_E 80% 8.259 36,4 1.461 

10,5 3 45 12 x 6 APC_E 80% 8.283 35,9 1.914 

10,5 3 45 12 x 8 APC_E 79% 8.075 40,5 1.949 

10,5 3 45 13 x 4 APC_E 81% 8.442 32,3 2.012 

14,0 4 45 8 x 8 APC_E 83% 11.609 32,4 1.217 


14,0 4 45 9 x 7,5 APC_E 83% 11.450 35,6 1.712 


14,0 4 45 10 x 5 APC_E 84% 11.646 31,6 2.009 






7,0 2 35 17 x 8 APC_E 72% 3.321 18,7 1.185 

7,0 2 35 17 x 10 APC_E 70% 3.157 22,0 1.161 

7,0 2 35 20 x 10 APC_E 64% 2.774 29,8 1.606 

10,5 3 35 12 x 10 APC_E 78% 5.365 18,5 787 

10,5 3 35 12 x 12 APC_E 77% 5.170 22,1 997 

10,5 3 35 13 x 10 APC_E 78% 5.259 20,5 1.026 

10,5 3 35 14 x 7 APC_E 78% 5.349 18,8 1.293 

10,5 3 35 14 x 8,5 APC_E 78% 5.333 19,1 1.285 

10,5 3 35 14 x 10 APC_E 76% 5.031 24,7 1.274 

10,5 3 35 15 x 8 APC_E 75% 4.986 25,5 1.612 

10,5 3 35 16 x 8 APC_E 72% 4.712 30,5 2.043 

14,0 4 35 10 x 10 APC_E 81% 7.353 19,4 1.017 

14,0 4 35 11 x 8 APC_E 81% 7.389 18,8 1.179 

14,0 4 35 11 x 10 APC_E 79% 6.950 26,2 1.365 

14,0 4 35 12 x 8 APC_E 81% 7.241 21,3 1.574 

14,0 4 35 12 x 10 APC_E_v2 78% 6.896 27,1 1.336 

14,0 4 35 12 x 10 APC_E 82% 6.764 29,3 1.283 

14,0 4 35 13 x 6 APC_E 81% 7.203 22,0 1.837 

14,0 4 35 13 x 6,5 APC_E 80% 7.061 24,3 1.686 

14,0 4 35 13 x 8 APC_E 79% 6.948 26,3 1.955 

14,0 4 35 14 x 7 APC_E 78% 6.768 29,3 2.149 

14,0 4 35 14 x 8,5 APC_E 78% 6.712 30,2 2.036 

17,5 5 35 9 x 9 APC_E 85% 9.371 19,8 1.259 

17,5 5 35 10 x 7 APC_E 85% 9.420 19,1 1.447 


17,5 5 35 10 x 10 APC_E 83% 8.924 26,8 1.479 




17,5 5 35 11 x 5,5 APC_E 85% 9.367 19,9 1.720 

17,5 5 35 11 x 7 APC_E 84% 9.103 24,0 1.881 

17,5 5 35 11 x 8,5 APC_E 83% 8.952 26,4 1.992 

17,5 5 35 11 x 8 APC_E 83% 8.910 27,1 1.690 

17,5 5 35 12 x 6 APC_E 83% 8.922 26,9 2.247 

17,5 5 35 12 x 8 APC_E 81% 8.728 29,9 2.270 

17,5 5 35 13 x 4 APC_E 84% 9.107 24,0 2.377 

NN119

BL-motors 


06 430 kv No. 4999 




motor, with triple ballraces. D-series 

motors feature a third bearing, known as a 

thin-ring ballrace, for improved true-running 

and precision. This prevents the motor bell 






propellers. 



magnets. 




Application: 

For electric gliders up to about 8000 g 


Aerobatic and 3-D models up to about 3000 

g 

Power comparable with a 40-size glow 

engine. 

 


Voltage 

10 ... 24 Volt 




42 A 


72 A 

Dimensions 

32 Ø x 65 mm 


280 g 


5 mm 

Power (W) 

1050 W 

 

 

 

Shaft and fan 

for BL outrunners 

No. 466942 

 

Shaft and 42 mm Ø 

fan, for retro-fitting 

fan cooling to 

D-42-65 series 

motors. Shaft length: 

65.5 mm 

 

NN120

BL-motors 


Voltage 

(V) 

Li-cells 

Imax (A) 

(5 min) 

Propeller 

Efficiency 

(%) 

Rpm 

Load cur. 

(A) 

Thrust ( 

g) 

10,5 3 42 17 x 10 APC_E 84% 4.037 25,7 1.899 

10,5 3 42 20 x 10 APC_E 79% 3.707 38,5 2.868 

14,0 4 42 15 x 8 APC_E 87% 5.599 23,4 2.033 

14,0 4 42 16 x 8 APC_E 86% 5.421 29,5 2.704 

14,0 4 42 17 x 8 APC_E 85% 5.320 32,9 3.040 

17,5 5 42 14 x 7 APC_E 89% 7.091 23,8 2.376 

17,5 5 42 12 x 10 APC_E 89% 7.086 24,0 1.414 

17,5 5 42 14 x 8,5 APC_E 88% 7.056 24,9 2.251 

17,5 5 42 13 x 10 APC_E 88% 6.989 27,0 1.844 

17,5 5 42 12 x 12 APC_E 88% 6.967 27,7 1.777 

17,5 5 42 15 x 8 APC_E 86% 6.777 33,6 2.978 

17,5 5 42 14 x 10 APC_E 86% 6.773 33,7 2.278 

21,0 6 42 13 x 6,5 APC_E 88% 8.472 26,6 2.443 

21,0 6 42 11 x 10 APC_E 88% 8.394 28,8 2.042 

21,0 6 42 13 x 8 APC_E 88% 8.393 28,9 3.005 

21,0 6 42 12 x 10 APC_E_v2 87% 8.376 29,3 2.012 

21,0 6 42 14 x 7 APC_E 87% 8.273 32,3 3.314 

21,0 6 42 12 x 10 APC_E 87% 8.249 32,9 1.948 

21,0 6 42 14 x 8,5 APC_E 87% 8.207 34,1 3.044 

21,0 6 42 12 x 12 APC_E 87% 8.122 36,5 2.392 

NN121

BL-motors 


07 400 kv No. 4664 


08 330 kv No. 4665 


10 290 kv No. 4666 

NN122 




motor, with twin ballraces. To improve 









propellers. 




magnets. 




Application: 

For electric gliders weighing up to about 11 

kg 

Scale and sport models up to about 6 kg 

Aerobatic and 3-D models up to about 4 kg 

Power comparable with a 75-size glow 

engine. 

 

Shaft and fan for BL outrunner 

No. 466950 

 




 



Voltage 

15 ... 30 Volt 




60 A 


82 A 

Dimensions 

50 Ø x 65 mm 


330 g 


6 mm 

Power (W) 

1500 W 

 

 



Voltage 

15 ... 30 Volt 




55 A 


75 A 

Dimensions 

50 Ø x 65 mm 


330 g 


6 mm 

Power (W) 

1400 W 

 

 



Voltage 

20 ... 36 Volt 




50 A 


70 A 

Dimensions 

50 Ø x 65 mm 


290 g 


6 mm 

Power (W) 

1300 W 

 

BL-motors 



17,5 5 60 14 x 10 APC_E 88% 6.691 31,8 2.224 

17,5 5 60 15 x 8 APC_E 88% 6.692 31,7 2.904 

17,5 5 60 16 x 8 APC_E 87% 6.527 40,4 3.920 

17,5 5 60 17 x 8 APC_E 87% 6.432 45,4 4.444 

21,0 6 60 12 x 12 APC_E 89% 8.029 34,5 2.339 

21,0 6 60 13 x 10 APC_E 89% 8.024 34,8 2.451 

21,0 6 60 14 x 8,5 APC_E 89% 8.083 32,0 2.953 

21,0 6 60 14 x 10 APC_E 89% 7.832 44,0 3.026 

21,0 6 60 15 x 8 APC_E 88% 7.855 42,9 4.002 

24,5 7 60 11 x 10 APC_E 88% 9.399 35,4 2.599 

24,5 7 60 12 x 10 APC_E_v2 88% 9.395 35,6 2.562 

24,5 7 60 12 x 10 APC_E 88% 9.279 40,8 2.496 

24,5 7 60 12 x 12 APC_E 88% 9.201 44,4 3.045 

24,5 7 60 13 x 8 APC_E 88% 9.398 35,4 3.887 

24,5 7 60 13 x 10 APC_E 88% 9.163 46,1 3.223 

24,5 7 60 14 x 7 APC_E 88% 9.309 39,5 4.274 

24,5 7 60 14 x 8,5 APC_E 88% 9.244 42,4 3.862 

28,0 8 60 11 x 10 APC_E 89% 10.703 46,5 3.429 

28,0 8 60 12 x 10 APC_E_v2 88% 10.713 46,1 3.379 

28,0 8 60 13 x 6,5 APC_E 89% 10.774 43,3 3.985 

28,0 8 60 13 x 8 APC_E 89% 10.701 46,6 5.225 



17,5 5 55 17 x 8 APC_E 87% 5.476 27,9 3.222 

17,5 5 55 17 x 10 APC_E 87% 5.345 34,8 3.328 

21,0 6 55 16 x 8 APC_E 87% 6.516 33,4 3.906 

21,0 6 55 17 x 8 APC_E 87% 6.429 37,6 4.440 

21,0 6 55 17 x 10 APC_E 85% 6.241 46,7 4.537 

24,5 7 55 14 x 10 APC_E 88% 7.626 34,7 2.873 

24,5 7 55 15 x 8 APC_E 88% 7.643 33,9 3.788 

24,5 7 55 16 x 8 APC_E 87% 7.443 43,1 5.097 

28,0 8 55 12 x 12 APC_E 91% 8.910 34,2 2.861 

28,0 8 55 13 x 10 APC_E 91% 8.885 35,3 3.025 

28,0 8 55 14 x 8,5 APC_E 91% 8.950 32,4 3.620 

28,0 8 55 14 x 10 APC_E 89% 8.674 44,9 3.694 

28,0 8 55 15 x 8 APC_E 90% 8.715 43,0 4.926 



21,0 6 50 17 x 8 APC_E 87% 5.585 24,5 3.351 

21,0 6 50 17 x 10 APC_E 87% 5.459 30,7 3.472 

24,5 7 50 16 x 8 APC_E 87% 6.478 28,2 3.862 

24,5 7 50 17 x 8 APC_E 87% 6.401 31,8 4.401 

24,5 7 50 17 x 10 APC_E 86% 6.232 39,7 4.524 

28,0 8 50 14 x 10 APC_E 89% 7.528 28,7 2.801 

28,0 8 50 15 x 8 APC_E 89% 7.540 28,1 3.687 

28,0 8 50 16 x 8 APC_E 88% 7.372 35,9 5.000 

28,0 8 50 17 x 8 APC_E 88% 7.273 40,5 5.682 

31,5 9 50 14 x 10 APC_E 89% 8.386 36,1 3.458 

31,5 9 50 15 x 8 APC_E 89% 8.415 34,7 4.592 

NN123

BL-motors 

ROXXY ® BL outrunner D63-72 Air 200 kv No. 4992 

ROXXY ® BL outrunner D63-72 Air 230 kv No. 4993 

ROXXY ® BL outrunner D63-72 Air 250k v No. 4994 




motor, with triple ballraces. 

D-series motors feature a third bearing, 

known as a thin-ring ballrace, for improved 

true-running and precision. This prevents the 

motor bell distorting under load, and ensures 

smooth running. Due to their construction 

these motors require no gearbox. 

They are highly efficient high-torque motors 

with a broad power spectrum, capable of 

driving large propellers. 



magnets. 




Application: 

For electric gliders weighing 14 ... 17 kg 

Scale and sport models 8 ... 9 kg 

Aerobatic and 3-D models up to 6 kg 

Electric helicopters with 120 - 130 cm rotor Ø 

NN124 

ROXXY ® BL outrunner D63-72 Air 200 kv 

Preferred application is F3A and similar 

models which are not bound by the 5 kg 

weight limit. Up to about 2.20 ... 2.40 m 

wingspan, operation possible with up to 12S 

LiPo battery. 

Power comparable with 90-size glow 

engine. 

 


Voltage 

20 ... 50 Volt 




70 A 


82 A 

Dimensions 

63 Ø x 72 mm 


660 g 


8 mm 

Power (W) 

2200 W 

Recommended propellers: 

10S LiPo 22 x 8“ - 23 x 8 „8S LiPo 22 x 10“ 

ROXXY ® BL outrunner D63-72 Air 230 kv 

Preferred application is F3A models of 2 m 

wingspan and maximum 5 kg weight. 

Ideal for use with 10S LiPo battery. 


engine. 

 


Voltage 

20 ... 50 Volt 




75 A 


86 A 

Dimensions 

63 Ø x 72 mm 


660 g 


8 mm 

Power (W) 

2300 W 


10S LiPo 20 x 13“, 22 x 8“ or 19 x 13 ... 15“ 

 

ROXXY ® BL outrunner D63-72 Air 250k v 

Preferred application is F3A models of 2 m 

wingspan and max. 5 kg weight. Ideal for 

use with 8S LiPo battery. 


engine. 

 


Voltage 

20 ... 40 Volt 

No. of Li cells 5 .... 10 



80 A 


90 A 

Dimensions 

63 Ø x 72 mm 


660 g 


8 mm 

Power (W) 

2400 W 


8S LiPo 20 x 13“ APCE 

approx. 80 A at 6500 rpm. 

Alternatively 19 x 13 ... 15“ 

For 10S LiPo propeller 18 x 11 ... 13“ 

Shaft and 63-72 mm Ø fan for 

BL outrunner No. 466963 

 

 

 



length: 75 mm 

BL-motors 

ROXXY ® BL outrunner CA88-19 Dominator 220 kv No. 6969 

A further advantage of this 

design is that its ultra-short 

magnet bell cannot distort even 

under severe stress. This 

prevents unnecessary losses 

due to imbalance and friction. 

The motor design keeps the 

ballraces spaced widely apart, 

producing a stable support and 

avoiding premature bearing 

wear due to radial forces. 

This motor requires no gearbox. 

It is a highly efficient, hightorque 

motor with a broad 

power spectrum, capable of 

driving large propellers directly. 

The motor is designed to be 

mounted on the model‘s 

firewall. 

Application: 

For electric gliders weighing 18 … 20 kg 

Scale and sport models weighging 8 … 10 kg 


Power corresponds to a glow engine of 

around 26 cc 

Recommended battery: 10S LiPo 


20 ... 22 x 10“ APCE, 19 x 13 … 15“ 

 


Voltage 

20 ... 50 Volt 




80 A 


95 A 

Dimensions 

Ø 88 x 29 mm 


630 g 


8 mm 

Power (W) 

2600 W 

 

 

Modern ROXXY ® BL outrunner 

competition motor. 

The ROXXY ® BL outrunner motor series has 

been expanded by the C 88-19 Dominator 

F3A competition motor. 

This outstanding feature of this newly 

developed 22-pole outrunner is its compact 

format and open construction, which 

promotes extremely efficient motor cooling. 

 

Voltage (V) Li-cells Propeller Load cur. (A) Rpm 

30,5 8S-LiPo 20 x 13 APC 75 6100 

35,3 10S-LiPo 19 x 12 APC 72 7000 

NN125

BL-motors 

ROXXY ® BL outrunner C80-75-09 Air 210 kv 

No. 4978A 

Modern BL outrunner 

motor with 

Neodymium magnets. 

New 14-pole ROXXY ® BL 

C-series outrunner motor 

with integral propeller 

driver. These motors 

require no gearbox due to 

their construction. They are 

highly efficient, high-torque 

motors with a broad power 

spectrum, capable of driving 

large propellers. Ideal for 

direct-drive applications with 

integral propeller driver. 

• High efficiency due to 

maximum copper fill and 

the use of high-quality 


• Precision ballraces for 

free-running characteristics. 

Application: 


Scale and sport models weighing 8 ... 10kg 


E-helicopters, 160 - 180 cm rotor diameter 

Power comparable with 26 cc engine. 

 


Voltage 

20 ... 48 Volt 




100 A 


Dimensions 

80 Ø x 75 mm 


1050 g 


10 mm 


10 mm 

Power (W) 

3500 W 

 

 

NN126

BL-motors 

ROXXY ® BL outrunner C80-75-09 Fan 210 kv 

No. 4978F 

Modern BL outrunner 

motor with Neodymium 

magnets. 

New 14-pole ROXXY ® BL 

C-series outrunner motor with 

integral cooling fan. These motors 

require no gearbox due to their 

construction. They are highly 

efficient, high-torque motors with 

a broad power spectrum, capable 

of driving large propellers. 

• High efficiency due to maximum 

copper fill and the use of 

high-quality Neodymium 

magnets. 

• Precision ballraces for freerunning 


Application: 


Scale and sport models 8 ... 10kg 


Electric helicopter with 160 - 180 cm rotor Ø 

Power comparable to 26 cc engine. 

 


Voltage 

20 ... 48 Volt 




100 A 


Dimensions 

80 Ø x 75 mm 


1050 g 


10 mm 


35 mm 

Power (W) 

3500 W 

 

 

NN127

BL-motors 

ROXXY ® BL outrunner C80-85-10 Air 220 kv 

No. 4979A 

Modern BL outrunner motor with Neodymium magnets. 

New 14-pole ROXXY ® BL C-series outrunner motor with integral propeller 

driver. These motors require no gearbox due to their construction. These are 

highly efficient, high-torque motors with a broad power spectrum, capable of 

driving large propellers. 

• High efficiency due to maximum copper fill and the use of high-quality 


• Precision ballraces for free-running characteristics 

With integral propeller driver. 

Application: 




power comparable with 26 cc engine. 

 


Voltage 

20 ... 48 Volt 




125 A 


Dimensions 

80 Ø x 85 mm 


1310 g 


10 mm 

Power (W) 

4800 W 

 

 

NN128

BL-motors 

ROXXY ® BL outrunner C80-85-10 Fan 220 kv 

No. 4979F 

Modern BL outrunner motor with Neodymium magnets. 

New 14-pole ROXXY ® BL C-series outrunner motor with integral cooling fan. 

These motors require no gearbox due to their construction. They are highly 

efficient, high-torque motors with a broad power spectrum, capable of driving 

large propellers. Ideal for direct-drive applications. 

• High efficiency due to maximum copper fill and the use of high-quality Neodymium 

magnets. 

• Precision ballraces for free-running characteristics. 

Application: 





Power comparable with a 26 cc engine. 

 


Voltage 

20 ... 48 Volt 




125 A 


Dimensions 

80 Ø x 85 mm 


1310 g 


10 mm 

Power (W) 

4800 W 

 

 

NN129

BL-motors 

ROXXY ® BL outrunner CA80-80 Air 190 kv 

No. 6970A 

Modern Hi-Power BL outrunner motor with Neodymium 

magnets. 

New 14-pole ROXXY ® BL CA-series outrunner motor, with triple ballraces. 

The CA series of motors features a third thin-ring ballrace for improved 

true-running and precision. This prevents the motor bell distorting under 

load, and ensures smooth running. These motors require no gearbox due to 

their construction. They are highly efficient, high-torque motors with a broad 

power spectrum, capable of driving large propellers. With integral propeller 

driver. 

• High efficiency due to maximum copper fill and the use of high-quality 


• Precision ballraces for free-running characteristics 

With integral propeller driver.. 

Application: 

for electric gliders weighing 18 ... 20 kg 

Scale and sport models weighing 8 ... 10 kg 


Power comparable with a 26 cc glow engine. 

 


Voltage 

30 ... 50 Volt 




100 A 


Dimensions 

80 Ø x 80 mm 


1440 g 


10 mm 

Power (W) 

4600 W 

 

 

NN130

BL-motors 

ROXXY ® BL outrunner CA80-80 Fan 220 kv 

No. 6970F 

Modern Hi-Power BL outrunner motor with Neodymium 

magnets. 

New 14-pole ROXXY ® BL CA-series outrunner motor, with triple ballraces. The CA 

series of motors features a third thin-ring ballrace for improved true-running and 

precision. This prevents the motor bell distorting under load, and ensures smooth 

running. These motors require no gearbox due to their construction. They are highly 

efficient, high-torque motors with a broad power spectrum, capable of driving 

large propellers. With integral fan for effective motor cooling. 

• High efficiency due to maximum copper fill and the use of high-quality Neodymium 

magnets. 

• Precision ballraces for free-running characteristics. 

• 

• Application: 

• For electric gliders weighing 18 ... 20 kg 

• Scale and sport models weighing 8 ... 10 kg 

• Aerobatic and 3-D models up to about 7 kg 

• Electric helicopters with 180 - 200 cm rotor Ø 

Power comparable with 26 cc engine. 

 


Voltage 

30 ... 55 Volt 




125 A 


Dimensions 

80 Ø x 80 mm 


1440 g 


10 mm 

Power (W) 

4800 W 

 

 

NN131

BL-motors 

ROXXY ® BL outrunner CA120-80 Fan 190 kv 

6971 

No. 



magnets. 



Application: 


Scale and sport models weighing 12 ... 16 kg 



Power comparable with a turbine. 

 


Voltage 

30 ... 60 Volt 




180 A 


Dimensions 

120 Ø x 80 mm 


2650 g 


10 mm 

Power (W) 

11000 W 

 

 

The Colossus - modern Ultra- 

Hi-Power ROXXY ® BL outrunner 

motor with Neodymium magnets. 

New 14-pole ROXXY ® BL CA-series 

outrunner motor, with triple ballraces. The 

CA series of motors features a third thin-ring 

ballrace for improved true-running and 

precision. This prevents the motor bell 

distorting under load, and ensures 

smooth running. These motors require 

no gearbox due to their construction. 

They are highly efficient, high-torque 

motors with a broad power spectrum, 

capable of driving large propellers. 

With integral fan for effective motor 

cooling. 

NN132

LiPo batteries 

ROXXY ® -Power-Light 

20C 

The light ROXXY ® -POWER 

LiPo-batteries, high performance 

at a low price. 

The ROXXY ® -Power 20C light-series 

batteries excel with their good voltage 

stability, high capacity and light weight. In 

many cases, models fitted with LiPo 

batteries are operated with current drains 

well below the actual C-rate of the battery. 

The battery weight increases with a higher 

charge/discharge rate, since the motor 

mostly will not deliver more power but must 

power more weight, the result is generally 

disappointing. 

The trend towards keeping the battery 

weight as low as possible has been seen in 

many model categories and competition 

classes. 

robbe is accommodating this trend with the 

20C light range, inexpensive-light-powerful. 

Fast charge capable with a charge rate of 

1....4C, able to withstand discharge with 

20C/40C (burst). The batteries excel with the 

following special characteristics: 

• Large internal conductors allow a high 

current load and an excellent voltage state, 

whereby the cells remain „cool“ (under 

50˚C with 15C discharge), which leads to a 

longer lifetime. 

• High energy density and excellent 

discharge capacity value. 

• Compact dimensions and low weight 

thanks to a special packing method. 

• A special joining technology is used for the 

parallel connections which offers a low 

resistance and minimal heating. 

• All ROXXY ® -POWER battery packs are 

made only with close tolerance selected 

cells (≤ 2%) 

NEW! A higher level of safety: 

All ROXXY ® - POWER-LiPo batteries are 

fitted with the unique BID-Chip. BID-System 

stands for Battery-IDentification-System. 

Each battery is fitted with a small, light 

BID-Chip, which stores all the relevant Data 

to charge and discharge the battery to the 

optimum. To charge as well as discharge, 

the BID-Chip and battery will be connected 

to a robbe - BID - charger, the charge 

process will simply be started by pressing 

the start button. The BID-Chip sets the 

charge parameters. 

The advantages of the BID-Chip-System: 

• No tiresome search to find the setting 


• Maximum protection against wrong 

operation 

• Storage of the relevant battery data on the 

BID-Chip are the special advantages of 

using the BID-System 

The BID-Chip is so small and light (0.5g), 

that it can be affixed to or shrink-wrapped to 

the battery. Double sided plugs make for 

easy use and save weight. 

Following charge settings are stored on 

the BID- Chip: 

• Battery type 

• Cell-count 

• Battery capacity 

• Charge current 

• Discharge current 

• Date (e.g. first usage) 

• Cut off voltage 

• Cut-off temperature 

The following data after each charge 

process are stored on the BID- Chip. 

• Current charged capacity 

• Current discharged capacity 

NN133


• Maximum charged capacity 

• Maximum discharged capacity 

• Number of charge cycles 

A higher level of safety 

By using enriched lithium 

materials, these batteries offer 

dependability plus 

All ROXXY ® - POWER LiPo 

battery types are made 

according to the transport 

regulations and tested and 

individually certified to the 

Standard UL 3840 (§38.3). 

As well as the generously 

dimensioned Silicon Connector 

Leads to charge and discharge 

the battery pack, the robbe 

ROXXY ® -POWER LiPo battery 

packs have a JST-EHR 

Voltage-Sensor-Connector also 

made from silicon cable, 

through which all individual cell 

voltages in the pack are freely 

accessible. 

For the charging process, an 

Equalizer is connected to the 

Voltage Sensor connector to 

balance each cell. Moreover, 

every single cell will be 

checked for maximum voltage 

and, wherever necessary, the 

charge process will be halted to 

avoid overcharging. 

The voltage sensor connector 

is helpful also in practical use 

(discharging), by connecting 

the MC-Balancer ( No. 8636 

(7S) or No. 8643 (14S), the 

individual cells can be checked 

for low voltage and, where 

necessary, reduce the discharge 

current to avoid a deep 

discharge and damage to the 

LiPo cells. 

Weight includes the 20 cm 

Silicon connector lead 

ROXXY ® -POWER light Serie 20/40C 

No. 

No. 

of 

cells 

Capacity 

(mAh) 

Charge current Discharge current Dimensions Weight 

(g) 

Normal Maximum Normal Maximum L B H 

C A C A C A C A mm 

6847 3 1000 1 1 4 4 20 20 40 40 70 35 20 92 

6848 2 1000 1 1,0 4 4,0 20 20,0 40 40,0 68 30 16 64 

6849 3 1000 1 1,0 4 4,0 20 20,0 40 40,0 70 30 23 92 

6850 2 1300 1 1,3 4 5,2 20 26,0 40 52,0 70 35 16 81 

6851 3 1300 1 1,3 4 5,2 20 26,0 40 52,0 70 35 24 118 

6852 2 1500 1 1,5 4 6,0 20 30,0 40 60,0 105 34 13 94 

6853 3 1500 1 1,5 4 6,0 20 30,0 40 60,0 105 34 19 134 

6900 2 1500 1 1,5 4 6,0 20 30,0 40 60,0 78 34 17 93 

6901 3 1500 1 1,5 4 6,0 20 30,0 40 60,0 79 34 25 134 

6902 2 1800 1 1,8 4 7,2 20 36,0 40 72,0 88 34 17 107 

6903 3 1800 1 1,8 4 7,2 20 36,0 40 72,0 90 34 25 155 

6854 2 2200 1 2,2 4 8,8 20 44,0 40 88,0 105 34 17 134 

6855 3 2200 1 2,2 4 8,8 20 44,0 40 88,0 105 34 24 192 

6856 2 2600 1 2,6 4 10,4 20 52,0 40 104,0 113 34 18 157 

6857 3 2600 1 2,6 4 10,4 20 52,0 40 104,0 113 34 26 224 

6858 4 2600 1 2,6 4 10,4 20 52,0 40 104,0 115 34 35 225 

6859 5 2600 1 2,6 4 10,4 20 52,0 40 104,0 116 35 43 362 

6860 6 2600 1 2,6 4 10,4 20 52,0 40 104,0 115 34 51 431 

6861 2 3300 1 3,3 4 13,2 20 66,0 40 132,0 135 43 15 192 

6862 3 3300 1 3,3 4 13,2 20 66,0 40 132,0 137 43 22 273 

6863 4 3300 1 3,3 4 13,2 20 66,0 40 132,0 138 43 29 364 

6864 5 3300 1 3,3 4 13,2 20 66,0 40 132,0 138 43 35 441 

6865 6 3300 1 3,3 4 13,2 20 66,0 40 132,0 138 43 42 528 

6866 2 4000 1 4,0 4 16,0 20 80,0 40 160,0 136 43 17 226 

6867 3 4000 1 4,0 4 16,0 20 80,0 40 160,0 137 43 26 329 

6868 4 4000 1 4,0 4 16,0 20 80,0 40 160,0 137 43 34 431 

6869 5 4000 1 4,0 4 16,0 20 80,0 40 160,0 137 43 42 534 

6870 6 4000 1 4,0 4 16,0 20 80,0 40 160,0 138 43 51 635 

6871 2 4300 1 4,3 4 17,2 20 86,0 40 172,0 141 45 17 253 

6872 3 4300 1 4,3 4 17,2 20 86,0 40 172,0 142 45 25 365 

6873 4 4300 1 4,3 4 17,2 20 86,0 40 172,0 145 45 33 477 

6874 5 4300 1 4,3 4 17,2 20 86,0 40 172,0 144 45 42 594 

6875 6 4300 1 4,3 4 17,2 20 86,0 40 172,0 142 45 50 695 

6876 2 5000 1 5,0 4 20,0 20 100,0 40 200,0 144 50 18 285 

6877 3 5000 1 5,0 4 20,0 20 100,0 40 200,0 144 50 26 402 

6878 4 5000 1 5,0 4 20,0 20 100,0 40 200,0 144 50 34 531 

6879 5 5000 1 5,0 4 20,0 20 100,0 40 200,0 143 50 43 657 

6880 6 5000 1 5,0 4 20,0 20 100,0 40 200,0 144 50 50 775 

NN134


ROXXY ® -Power ZZ 

45C 

 

ROXXY ® -POWER LiPo-batteries 

with 45C-Rate and very high 

voltage stablity. 

The ROXXY ® -Power 45C-series batteries 

excel with their very high voltage stability of 

3.7V/cell under load. Which means a few 

hundred more revs from the motor and 

therefore more performance. More importantly, 

the cell has a higher capacity with a 

lower weight. 

Even with a higher discharge current, the 

voltage of the cell doesnt fall away and 

remains totally stable after the discharge. 

With this robbe is going along with the trend, 

since many model categories struggle with a 

weight limit. With this performance capable 

battery, it is possible to use one or two cells 

fewer, in return, increase the current load. 

As a result... lower weight with the same 

performance... 

Fast charge capable using high charge rate 

of 1...4C, discharge rates of 45C/90C 

(burst). The batteries excel with the following 

special characteristics: 

• Large internal conductors allow a high 

current load and an excellent voltage state, 

whereby the cells remain „cool“ (under 

50˚C with 15C discharge), which leads to a 

longer lifetime. 


discharge capacity value. 

• Compact dimensions and low weight 

thanks to a special packing method. 

• A special joining technology is used for the 

parallel connections which offers a low 

resistance and minimal heating. 

• All ROXXY ® --POWER battery packs are 

made only with close tolerance selected 

cells (≤ 2%). 

NEW! A higher level of safety: 

All ROXXY ® - POWER-LiPo batteries are 

fitted with the unique BID-Chip. BID-System 

stands for Battery-IDentification-System. 

Each battery is fitted with a small, light 

BID-Chip, which stores all the relevant Data 

to charge and discharge the battery to the 

optimum. To charge as well as discharge, 

the BID-Chip and battery will be connected 

to a robbe - BID - charger, the charge 

process will simply be started by pressing 

the start button. 

The BID-Chip sets the charge parameters. 

The advantages of the BID-Chip-System: 

• No tiresome search to find the setting 


• Maximum protection against wrong 

operation 

• Storage of the relevant battery data on the 

BID-Chip are the special advantages of 

using the BID-System 

The BID-Chip is so small and light (0.5g), 

that it can be affixed to or shrink-wrapped to 

the battery. Double sided plugs make for 

easy use and save weight. 

NN135


Following charge settings are 

stored on the BID- Chip 

• Battery type 

• Cell-count 

• Battery capacity 

• Charge current 

• Discharge current 

• Date (e.g. first usage) 

• Cut off voltage 

• Cut-off temperature 

The following data after each 

charge process are stored on 

the BID- Chip. 

• Current charged capacity 

• Current discharged capacity 

• Maximum charged capacity 

• Maximum discharged capacity 

• Number of charge cycles 

ROXXY ® -POWER ZZ 45C 

No. 

A higher level of safety 

By using enriched lithium materials, 

these batteries offer dependability 

plus 

All ROXXY ® - POWER LiPo battery 

types are made according to the 

transport regulations and tested 

and individually certified to the 

Standard UL 3840 (§38.3). 

As well as the generously 

dimensioned Silicon Connector 

Leads to charge and discharge the battery 

pack, the robbe ROXXY ® -POWER LiPo 

battery packs have a JST-EHR Voltage- 

Sensor-Connector also made from silicon 

cable, through which all individual cell 

voltages in the pack are freely accessible. 

For the charge process an equalizer will be 

connected voltage sensor connector to be 

able to balance out each cell. Each cell will 

be checked for maximum voltage and if 

necessary, the charge process will be 

stopped to avoid overcharging. 

No. 

of 

cells 

Capacity 

(mAh) 

Charge current Discharge current Dimensions Weight 

(g) 

Normal Maximum Normal Maximum L B H 

C A C A C A C A mm 

6881 3 1800 1 1,8 4 7,2 45 81,0 90 162,0 106 34 23 171 

6882 3 2200 1 2,2 4 8,8 45 99,0 90 198,0 105 34 26 204 

6883 3 2650 1 2,7 4 10,6 45 119,3 90 238,5 136 43 20 253 

6884 4 2650 1 2,7 4 10,6 45 119,3 90 238,5 138 43 26 326 

6885 6 2650 1 2,7 4 10,6 45 119,3 90 238,5 137 43 38 469 

6886 2 3000 1 3,0 4 12,0 45 135,0 90 270,0 135 42 15 196 

6887 3 3000 1 3,0 4 12,0 45 135,0 90 270,0 135 42 22 278 

6889 4 3000 1 3,0 4 12,0 45 135,0 90 270,0 139 42 29 364 

6890 5 3000 1 3,0 4 12,0 45 135,0 90 270,0 138 42 38 449 

6891 6 3000 1 3,0 4 12,0 45 135,0 90 270,0 137 42 44 527 

6892 3 4000 1 4,0 4 16,0 45 180,0 90 360,0 145 50 23 355 

6893 4 4000 1 4,0 4 16,0 45 180,0 90 360,0 145 50 29 450 

6894 5 4000 1 4,0 4 16,0 45 180,0 90 360,0 146 50 38 576 

6895 6 4000 1 4,0 4 16,0 45 180,0 90 360,0 143 50 45 689 

6896 3 5000 1 5,0 4 20,0 45 225,0 90 450,0 143 50 27 430 

6897 4 5000 1 5,0 4 20,0 45 225,0 90 450,0 144 50 37 575 

6898 5 5000 1 5,0 4 20,0 45 225,0 90 450,0 144 50 46 704 

6899 6 5000 2 10,0 4 20,0 45 225,0 90 450,0 145 50 55 839 

Weight includes the 20 cm Silicon connector lead 

The voltage sensor connector is useful also 

in practical use (discharging), by connecting 

the MC-Balancer ( No. 8636 (7S) or No. 

8643 (14S), the individual cells can be 

checked for low voltage and, where 

necessary, reduce the discharge current to 

avoid a deep discharge and damage to the 

LiPo cells. 

NN136


ROXXY ® -Power ZY 3S 850 mAh 

30C No. 6840 

 

The new ROXXY ® POWER LiPo batteries 

from robbe are high-performance LiPo 

packs at a reasonable price. 

The outstanding features of these batteries 

are their good voltage stability, high capacity 

and low weight. 

Can be fast-charged at the high rate of 1 ... 

4C. The ZY series is able to tolerate 

discharge rates of 30C / 60C (burst). 

The batteries offer the following outstanding 

features: 

• Wide internal conductor tracks for high 

current capacity and excellent voltage 

stability. This helps to keep the cells „cool“ 

(below 50˚C at 15C discharge), resulting in 

a longer effective life. 

• High energy density and excellent available 

discharge capacity values. Even at a 

discharge rate of 15C the available discharged 

capacity is greater than the nominal 

capacity. 

• Special cell stacking method for compact 

dimensions and reduced weight. 

• A special serial connecting technique 

ensures low transfer resistance and 

reduced heat development. 

• All ROXXY ® POWER battery packs are 

assembled using closely matched cells (≤ 

2%) exclusively. 

ROXXY ® -Power ZX 3S 950 mAh 

25C No. 6839 

 

The new ROXXY ® POWER LiPo batteries 

from robbe are high-performance LiPo 

packs at a reasonable price. 

The outstanding features of these batteries 

are their good voltage stability, high capacity 

and low weight. 

Can be fast-charged at the high rate of 1 ... 

4C. The ZX series can tolerate discharge 

rates of 25C / 50C (burst). 

The batteries offer the following outstanding 

features: 

• Wide internal conductor tracks for high 

current capacity and excellent voltage 

stability. This helps to keep the cells „cool“ 

(below 50˚C at 15C discharge), resulting in 

a longer effective life. 


discharged capacity values. Even at a 

discharge rate of 15C the available discharged 

capacity is greater than the nominal 

capacity. 

• Special cell stacking method for compact 

dimensions and reduced weight. 

• A special serial connecting technique 

ensures low transfer resistance and 

reduced heat development. 

• All ROXXY ® POWER battery packs are 

assembled using closely matched cells (≤ 

2%) exclusively. 

NN137

LiPo-battery accessories 

LiPo heater box No. 8599 

 

Temperature controlled box for heating up and maintaining 

temperature of LiPo battery packs before use. 

LiPo batteries do not like cold temperatures and produce markedly 

less performance when cold. The ROXXY ® -Power Heater-Box allows 

you to warm up, as well as keep your batteries at their best working 

temperature so that they can deliver their full performance capability 

when next used. 

Insulated aluminium case. 

Also suitable for 10 and 12 S LiPo packs. 

Internal dimensions: 

Adjustable temperature range: 

Input voltage 

Heating power 

4 mm banana plug connectors 

Red LED on-off monitor light 

Green LED temperature control light 

 

320 x 140 x 65 mm 

20˚C...50˚C. 

12 V DC 

approx. 6 Watt. 

 

 

NN138

LiPo-battery accessories 

LiPo Safe No. 6999 

 

The LiPo Safety Case for your LiPo batteries 

LiPo batteries can catch fire or explode if subjected to crash 

damage or other mistreatment. For protection against this, we 

recommend using our LiPo-Safe when storing, transporting as well 

as charging the batteries. The LiPo-Safe can withstand temperatures 

up to 1400˚C. Perfect protection if one stores the LiPo 

batteries at home. 

 


Dimensions 320 x 220 x 75 mm internal 


7000 g 

NN139

Accessories 

L-Spatz protective wing bag 

No. 25010004 

 

Reasonably priced protective bag made of 

printed multi-layer metallic-look foil, with 

fleece interior. Suitable for the wings of the 

L-Spatz glider 1 pair 

 

 

 

NN140

Key to symbols 

Construction 

Operation 

Each kit is coded with a star system, to help you 

choose the right model. 

The number of stars in the top section indicates the 

degree of difficulty in building the model, while the number 

in the lower section indicates the skill level required 

to operate the model. 

Guarantee: 

Dear fellow-modeller, 

As you would expect, our products are covered by a 

full 24-month guarantee, in accordance with legal requirements. 

If you wish to make a reasonable claim under 

guarantee, please approach your retailer in the first instance. 

Your retailer is your contact for guarantee matters, 

and is responsible for processing any guarantee 

claim. 

ARF models: 

very highly pre-fabricated model aircraft, requiring just 

assembly and installation of the power system and RC 

equipment. Conventional construction, very quick to 

build. 

RTF models: Ready To Fly 

Factory-assembled model aircraft. 

Just fit batteries and charge if necessary. 

LiPo battery guarantee: 

Please bear in mind that these cells can easily suffer 

permanent damage if you charge or discharge them 

incorrectly. For this reason the guarantee on these 

products is limited entirely to production faults and 

material defects which were present at the time of 

purchase.At this point we wish once again to point out 

expressly that it is essential to use suitable battery 

chargers and equalizers with these cells. 

RTR models: Ready To Run 

Factory-assembled model cars or boats. 

Just fit batteries and charge if necessary. 

Desk-Jet and Ink-Jet are registered trade names 

belonging to Hewlett-Packard, Canon and Epson. 

MS DOS, Windows and Windows ’95/’98/’2000/XP are 

registered trademarks of Microsoft Corporation.

No. 97112010 

robbe robbe Modellsport GmbH GmbH & Co. & Co. KG - KG Postfach - Postfach 1108 1108 - D-36352 - D-36352 Grebenhain 

Telefon Telefon +49 +49 (0) 6644/87-0 (0) 6644/87-0 - Telefax - Telefax +49 +49 (0) 6644/7412 (0) 6644/7412 - www.robbe.com 

-

Here - Robbe

Create successful ePaper yourself

Delete template?

Save as template?