Moeller Frequency inverters DF Vector frequency inverters DV

More documents

Recommendations

Info

15/2 Frequency Inverters – Overview DF51, DF6 Moeller HPL0211-2007/2008 http://catalog.moeller.net U/f inverters DF51-320 DF51-322 DF51-340 DF6-340 Frequency inverters Vector frequency inverters Rated voltage 230 V AC 230 V AC 400 V AC 400 V AC (50/60Hz g5%) 1 AC 180…264 V g 0% – K – – 3 AC 180…264 V g 0% K K – – 3 AC 342…528 V g 0% – – K K Rated operational current 15.9…32 A 1.4…10 A 1.5…16 A 22 … 230 A Assigned motor rating at rated voltage 4…7.5 kW 0.25…7.5 kW 0.37…7.5 kW 11 … 132 kW PID controller K K K K Built-in braking chopper (external braking resistance) – – – Only DF6-340-11K and DF6-340-15K Keypad K K K K Communication interface RS 485, Modbus RTU (optionally PROFIBUS-DP, CANopen) RS 422, RS 485, (optionally PROFIBUS-DP) Product standard EN 50178, IEC 61800-3 Approvals CE, UL, c-UL, cTick CE, UL, c-UL,CSA, cTick Degree of protection IP20 Ambient temperature Operating temperature °C -10 to +40 with rated current I e at a clock frequency of 5 kHz; up to +50 °C at a reduced clock frequency of 2 kHz and reduced output current of 80 % I e . Storage °C –25…+70 Mechanical shock resistance Vibration and impact, max. 5.9 m/s 2 (0.6 g) at 10 to 55 Hz Pollution degree VDE 0110 Part 2, pollution degree 2 Climatic proofing Class 3K3 according to EN 50178 (non-condensing, average relative humidity 20 to 90 %) Altitude m 0 to 1000 m a.s.l., above 1000 m with reduced current (2.5 %/100 m) Mounting position Vertically suspended Free surrounding areas 100 mm above and below device Emitted interference IEC/EN 61800-3 (EN 55011 group 1 class B) Noise immunity IEC/EN 61800-3, industrial environment Insulation resistance Overvoltage category III according to VDE 0110 Leakage current to PE mA < 3.5 (to EN 50178) Contact protection Finger and back-of-hand proof Protective isolation from switching Safe isolation from the mains. Double basic isolation (to EN 50178) circuitry Protective measures Overcurrent, earth fault, overvoltage, undervoltage, overload, overtemperature, electronic overload protection: I 2 t monitoring and PTC input (thermistor or thermostat) Notes If the frequency inverter is to be installed in an enclosure, control panel or similar housing, the ambient temperature Ta is taken to be the temperature inside this enclosure or control panel. All rating data of the power section is based on a switching frequency of 5 kHz (default setting) and an ambient temperature of +40 °C, for operation of a four-pole three-phase asynchronous motor. For Moeller Electric Sales and Support call KMparts.com (866) 595-9616
Frequency Inverters – Overview 15/3 http://catalog.moeller.net Moeller HPL0211-2007/2008 DV51 Vector inverters DV51-320 DV51-322 DV51-340 DV6-340 Rated voltage 230 V AC 230 V AC 400 V AC 400 V AC (50/60Hz g5%) 1 AC 180…264 V g 0 % – K – – 3 AC 180…264 V g 0 % K K – – 3 AC 342…528 V g 0 % – – K K Rated operational current 17.5…32 A 1.6…11 A 1.5…16 A 2.8…286 A Assigned motor rating at rated voltage 4…7.5 kW 0.25…7.5 kW 0,37…7.5 kW 0.75 … 132 kW PID controller K K K K Built-in braking chopper (external braking resistance) K K K DV6-340-075 … DV6-340-11K Keypad Option DEX-KEY-6…, DEX-KEY-10 K Communication interface RS 485, Modbus RTU (optionally PROFIBUS-DP, CANopen) RS 422, RS 485, (optionally PROFIBUS-DP) Product standard EN 50178, IEC 61800-3 Approvals CE, UL, c-UL, cTick CE, UL, c-UL,CSA, cTick Degree of protection IP20 Frequency inverters Vector frequency inverters Ambient temperature Operating temperature °C -10 to +40 with rated current I e at a clock frequency of 5 kHz; up to +50 °C at a reduced clock frequency of 2 kHz and reduced output current of 80 % I e . Storage °C –25…+70 Mechanical shock resistance Vibration and impact, max. 5.9 m/s 2 (0.6 g) at 10 to 55 Hz Pollution degree VDE 0110 Part 2, pollution degree 2 Climatic proofing Class 3K3 according to EN 50178 (non-condensing, average relative humidity 20 to 90 %) Altitude m 0 to 1000 m a.s.l., above 1000 m with reduced current (2.5 %/100 m) Mounting position Vertically suspended Free surrounding areas 100 mm above and below device Emitted interference IEC/EN 61800-3 (EN 55011 group 1 class B) Noise immunity IEC/EN 61800-3, industrial environment Insulation resistance Overvoltage category III according to VDE 0110 Leakage current to PE mA < 3.5 (to EN 50178) Contact protection Finger and back-of-hand proof Protective isolation from switching Safe isolation from the mains. Double basic isolation (to EN 50178) circuitry Protective measures Overcurrent, earth fault, overvoltage, undervoltage, overload, overtemperature, electronic overload protection: I 2 t monitoring and PTC input (thermistor or thermostat) Notes If the frequency inverter is to be installed in an enclosure, control panel or similar housing, the ambient temperature T a is taken to be the temperature inside this enclosure or control panel. All rating data of the power section is based on a switching frequency of 5 kHz (default setting) and an ambient temperature of +40 °C, for operation of a four-pole three-phase asynchronous motor. For Moeller Electric Sales and Support call KMparts.com (866) 595-9616
Page 1: Moeller HPL0211-2007/2008 Contents
Page 5 and 6: For Moeller Electric Sales and Supp
Page 7 and 8: Engineering Frequency inverters 15/
Page 13 and 14: Engineering Assigned switching and
Page 19 and 20: Engineering Assigned switching and
Page 21 and 22: 4 C READ COPY For Moeller Electric
Page 23 and 24: Ordering Vector frequency inverter
Page 29 and 30: Description Interface cards 15/29 h
Page 33 and 34: MNT PRG ENTER FWD REV For Moeller E
Page 35 and 36: Ordering Radio interference suppres
Page 37 and 38: http://catalog.moeller.net Three-ph
Page 49 and 50: Technical Data Mains chokes, motor
Page 53 and 54:
For Moeller Electric Sales and Supp
Page 55:
Dimensions Mains choke, motor choke
show all

Moeller Frequency inverters DF Vector frequency inverters DV

Create successful ePaper yourself

Delete template?

Save as template?