Minutes OF CMC Meeting Held on 05-03-08

<strong>Minutes</strong> of the 16 th meeting of the Committee, Constituted for grant/
renewal / revocation of consent (GREEN) under Air / Water Act, held
on 05.3.2008.
The following persons attended the <strong>CMC</strong> meeting on 05.3.2008.
1) Member Secretary, DPCC.
2) Dr. Chandra Prakash, Sr. Env. Engineer.
3) Dr. Anil Kumar, Member, Environment Department .
4) Dr. AK Nema, Member, Academic Institute.
5) EEs, AEEs & JEE of <strong>CMC</strong> DPCC.
Following are the minutes of the said meeting: -
Agenda Item No 1: Special Reference Cases.
Three cases of this agenda was discussed and the decisions taken
are annexed as Annexure – 1.
Agenda Item No 2 : The ATR of decisions taken in <strong>CMC</strong> meetings dated
26.09.2007 & 04.10.2007 respectively.
This agenda could not be taken up as files pertaining to Consent to
Establish were not brought by the <strong>CMC</strong> officials. It was decided by the
Committee that both the files i.e. Consent to Establish & Consent to Operate
should be brought in next <strong>CMC</strong> meeting so that an appropriate decision
could be taken up.
Agenda Item No 3 : Cases of Consent to Establish up to 31 st January,
2008.
Decisions taken wrt this agenda are annexed as Annexure – 2.

Looking at the certain deficiencies, observed by the Committee during
examination of various cases, it was decided to ask Enquiry Counter to
accept the Green applications complete in all respects if the deficiencies
memo has not been issued. The officer at the counter must ensure amongst
other papers / documents to be filed, they must submit proper site layout
plant giving dimension of the plot, area and the direction. Details about
electricity connection should also be filled up by the applicants, which
should be ensured by the Enquiry Counter officials.
Agenda Item No 4 : Cases of Consent to Operate / Renewal in
chronology.
As in all the cases, the units have not obtained Consent to
Establish, it was decided to ask the units to apply for Consent to Establish
along with a layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could be known
within 15 days. Details about the electricity connection should also be
sought from the units while issuing the said letters.Before the unit is sent a
letter, concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued giving a time
frame of 15 days. Decisions taken with regard to this agenda are annexed
as Annexure – 3.
The report regarding Atta Chakki, as decided by the Committee in the
last meeting, to be submitted by the Committee consisting of SEE(Plng),
SEE (MSW) and EE (BMW). SEE(Plng) to ensure the report is submitted
within 07 days.
<strong>Meeting</strong> ended with thanks to the Chair.

<strong>CMC</strong> Sl.No. Name of Unit Earlier decision, if any Remarks Decision of Committee on 05.3.2008
1 ALANKAR GLOBAL
PVT. LTD.
B-102/2,NARAINA
INDSUTRIAL AREA
PHASE-I
<strong>CMC</strong> Orange 30.01.2008
The Gren Committee may take its
application expeditiously for disposal.
Ask the unit to apply for Consent to
Establish along with layout plan and
location map indicating clear dimensions
of the unit and directions so that the exact
location / boundaries could be known
within 15 days.
2 ALANKAR
INTERNATIONAL
B-102/3, NARAINA
INDSUTRIAL AREA
PHASE-I
<strong>CMC</strong> Orange 30.01.2008
The Gren Committee may take its
application expeditiously for disposal.
Ask the unit to apply for Consent to
Establish along with layout plan and
location map indicating clear dimensions
of the unit and directions so that the exact
location / boundaries could be known
within 15 days.
2 3 Shri Ram & Sons
A-98, Wazirpur Ind
Area, Delh- - 52
<strong>CMC</strong> Orange 14.11.2007
After issuance of closure directions to the
unit and disconnection of water and
power supply, unit has filed fresh
application for consent to establish under
green category. To decide whether it is
green or not, new special inspection team
may inspect and report. Matter may be
taken up in next month <strong>CMC</strong> meeting.
<strong>CMC</strong> Orange 30.01.2008
No action by this Committee. Let him take
the consent from the Green Committee.
Applied for consent to
establish under green
category for mfg. of
hinges.
Inspection done by
Special Inspecting
Team and found
pickling activity
stopped/not being
carried out.
Electricity
disconnected and is
requesting for
restoration of the
same.
The inspection was conducted by SIT on
10.01.2008 & found that pickling activity
was closed and machinery for the pickling
activity have been removed from the
premises. The electriicty supply was
disconnected in view of the decision of
<strong>CMC</strong>(Orange) Committee on 05.07.2007.
In view of the inspection report of SIT, the
electricity / water which has been
disconnected may be restored to the unit.
Letter to be issued to NDPL & DJB.
Consent to Establish granted.

<strong>CMC</strong> S.No. ID No. Appl. Date Name of Unit Address Indl Area Decision of Committee on 05.3.2008
2 1 23719 1-Oct-07 S.S. ENGINERING
WORKS
PLOT NO 374,
POCKET-I, SECTOR-
4, DSIDC
BAWANA
INDUSTRIAL
AREA
Consent to Establish granted subject to
the condition to submit a layout plan
and location map indicating clear
dimensions of the unit and directions so
that the exact location / boundaries
could be known within 15 days before
issue of Consent to Establish.Details
about electricity connection be also
sought from the unit in the same letter.
2 2 23934 17-10-2007 MITTAL SALES
CORPORATION
3 24624 1-Jan-08 DAB ARC
ELECTRODES
(INDIA) PVT. LTD
PLOT NO 214,
SECTOR-3, POCKET-
B
BAWANA
INDUSTRIAL
AREA
A-140/1, PHASE-II OKHLA
INDUSTRIAL
AREA
Consent to Establish granted.
Consent to Establish granted without
washing, bleaching & dyeing subject to
a condition to submit a layout plan and
location map indicating clear
dimensions of the unit and directions so
that the exact location / boundaries
could be known within 15 days before
issue of Consent to Establish.Details
about electricity connection be also
sought from the unit in the same letter.
4 24633 2-Jan-08 FINE SPRING (I) C-194, PHASE-II MAYAPURI
INDUSTRIAL
AREA
Concerned <strong>CMC</strong> to inspect to check
status of all the three units which were
earlier operating from this premises.
Further, to check whether the unit
which has applied for CTE covered
under the Green category.

2 5 24638 2-Jan-08 SAGGU ENGG.
WORKS
PLOT NO 65,
POCKET-J,
SECTOR-4,
DSIDC
INDUSTRIAL
COMPLEX
BAWANA
INDUSTRIAL
AREA
Consent to Establish granted subject to
the condition to submit a layout plan
and location map indicating clear
dimensions of the unit and directions so
that the exact location / boundaries
could be known within 15 days before
issue of Consent to Establish.Details
about electricity connection be also
sought from the unit in the same letter.
2 6 24639 2-Jan-08 SHRI AMAR
STEEL
PRODUCTS
PLOT NO 251,
POCKET-H,
SECTOR-3,
DSIDC
INDUSTRIAL
COMPLEX
BAWANA
INDUSTRIAL
AREA
Consent to Establish granted subject to
the condition to submit a layout plan
and location map indicating clear
dimensions of the unit and directions so
that the exact location / boundaries
could be known within 15 days before
issue of Consent to Establish.Details
about electricity connection be also
sought from the unit in the same letter.
2 7 24640 2-Jan-08 NAVDEEP
PAPER
PRODUCT
PLOT NO 146,
FIE
PATPARGANJ
INDUSTRIAL
AREA
Ask the unit to apply for Consent to
Establish under Orange Category as
the unit generates hazardous waste
from the offset printing activity.
Consent to Establish application under
Green Category becomes infructuous in
view of the above reason.
2 8 24648 2-Jan-08 AMIT PACRAFT 136, FIE PATPARGANJ
INDUSTRIAL
AREA
Consent to Establish granted.

9 24657 3-Jan-08 ANAND CIS
(INDIA) PVT. LTD
X-32, PHASE-II
OKHLA
INDUSTRIAL
AREA
Consent to Establish granted subject to
the condition to submit a layout plan
and location map indicating clear
dimensions of the unit and directions so
that the exact location / boundaries
could be known within 15 days before
issue of Consent to Establish.Details
about electricity connection be also
sought from the unit in the same letter.
2 10 24671 4-Jan-08 FINE GLAZIERS PLOT NO 212,
SECTOR-2,
POCKET-D,
DSIDC
INDUSTRIAL
COMPLEX
BAWANA
INDUSTRIAL
AREA
Consent to Establish granted subject to
the condition to submit a layout plan
and location map indicating clear
dimensions of the unit and directions so
that the exact location / boundaries
could be known within 15 days before
issue of Consent to Establish.Details
about electricity connection be also
sought from the unit in the same letter.
2 11 24676 7-Jan-08 MAHAN
INDUSTRIES
E-89, PHASE-II
MANGOL PURI
INDUSTRIAL
AREA
Consent to Establish granted subject to
the condition to submit a layout plan
and location map indicating clear
dimensions of the unit and directions so
that the exact location / boundaries
could be known within 15 days before
issue of Consent to Establish.Details
about electricity connection be also
sought from the unit in the same letter.
2 12 24706 9-Jan-08 SURESH
KUMAR
B-6, GROUP
WAZIRPUR
INDUSTRIAL
AREA
2 13 24707 9-Jan-08 SUSHIL KUMAR B-6 (GROUP) WAZIRPUR
INDUSTRIAL
AREA
SIT to inspect & confirm whether the
activity undertaken by the unit falls
under Green category or not.
SIT to inspect & confirm whether the
activity undertaken by the unit falls
under Green category or not.

14 24715 10-Jan-
08
ANMOL
ENTERPRISES
A-17 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
A letter may be written to the unit
seeking following clarification : (a) the
reasons for change of activity other
than for which the plot was allotted. (b)
the allotment is for the first floor while
in the affidavit the unit proposes to start
the activity on ground floor. Also unit
be asked to submit a layout plan and
location map indicating clear
dimensions of the unit and directions so
that the exact location / boundaries
could be known. Copy of this letter
may be endorsed to Commissioner of
Industries.
15 24716 10-Jan-
08
ANMOL
ENTERPRISES
B-5 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
A letter may be written to the unit
seeking following clarification : (a) The
unit has not submitted a copy of
provisional alottment letter issued by
COI, wherein permitted activity is
mentioned. (b). Electricity connection
is in the name other than of the unit of
the owner.Also unit be asked to submit
a layout plan and location map
indicating clear dimensions of the unit
and directions so that the exact location
/ boundaries could be known. Copy of
this letter may be endorsed to
Commissioner of Industries.
16 24717 10-Jan-
08
ANMOL
ENTERPRISES
B-11 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
A letter may be written to the unit
seeking following clarification : (a) the
reasons for change of activity other
than for which the plot was allotted.
Also unit be asked to submit a layout
plan and location map indicating clear
dimensions of the unit and directions so
that the exact location / boundaries
could be known. Copy of this letter
may be endorsed to Commissioner of
Industries.

2 17 24725 11-Jan-
08
2 18 24738 14-Jan-
08
19 24745 15-Jan-
08
JAI LAL GUPTA B-8 (GROUP WAZIRPUR
INDUSTRIAL
AREA
JASNEET
ENGINEERING
WORKS
MERCURY
SALES
CORPORATION
PLOT NO 47,
POCKET-C,
SECTOR-3,
DSIDC
INDUSTRIAL
COMPLEX
9/46-E
BAWANA
INDUSTRIAL
AREA
KIRTI NAGAR
INDUSTRIAL
AREA
SIT to inspect & report.
Consent to Establish granted.
A letter may be written to the unit
seeking detailed mfg. process and the
difference between the plot area
mentioned in settlement deed and
application form.
2 20 24767 16-Jan-
08
K.G.
ELECTRONICS
PVT. LTD
PLOT NO 102,
DSIDC COMPLEX
NARELA
INDUSTRIAL
AREA
Ask the unit to file a copy of plot
allotment documents for the activity
which have been obtained by DSIDC
within 15 days.
21 24771 17-Jan-
08
SMR
SOLUTIONS
PVT. LTD
3RD FLOOR, B-56 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
A letter may be written to the unit
seeking following clarification : (a) As
per the electricity bill submitted by
you, the electric connection is in the
name of Mohd. Yusuf whereas the
application has been made Sh. Santosh
Kumar. (b) the provisional allotment
letter was not submitted. Also unit be
asked to submit a layout plan and
location map indicating clear
dimensions of the unit and directions so
that the exact location / boundaries
could be known. Copy of this letter
may be endorsed to Commissioner of
Industries.
22 24772 17-Jan-
08
SARVASV
MACHINERY &
EQUIPMENTS
PVT. LTD
PLOT NO B-200,
PHASE-I
OKHLA
INDUSTRIAL
AREA
Consent to Establish granted.

2 23 24773 17-Jan-
08
R.N. GUPTA &
CO
A-125 WAZIRPUR
INDUSTRIAL
AREA
The unit has already been sealed by
SDM .Now the unit has applied under
Green category and the application
shows overwriting and application of
flued without proper attestation. (ii) the
affidavit filed by the unit has several
cuttings without attestation. Further
more the project report submitted also
has corrections not attested. The unit to
submit detailed reply within 15 days.
Inspection to be conducted by SIT to
verify the operational status of the unit
and proposed activity whether it falls
under Green category or not.
2 24 24782 18-Jan-
08
SHANKAR
ENGG. WORKS
A-50/1
GTK ROAD
INDUSTRIAL
AREA
Consent to Establish granted subject to
the condition to submit a layout plan
and location map indicating clear
dimensions of the unit and directions so
that the exact location / boundaries
could be known within 15 days before
issue of Consent to Establish.Details
about electricity connection be also
sought from the unit in the same letter.
2 25 24786 18-Jan-
08
BHARAT SHEET
METAL
PLOT NO 105,
POCKET-E,
SECTOR-4,
DSIDC
INDUSTRIAL
COMPLEX
BAWANA
INDUSTRIAL
AREA
Consent to Establish granted subject to
the condition to submit a layout plan
and location map indicating clear
dimensions of the unit and directions so
that the exact location / boundaries
could be known and also the name of
the person in whose name the
electricity connection exist / will be
obtained within 15 days before issue of
Consent to Establish.Details about
electricity connection be also sought
from the unit in the same letter.
26 24788 18-Jan-
08
S.G. FASHIONS F-65, PHASE-I OKHLA
INDUSTRIAL
AREA
Consent to Establish granted.

27 24803 22-Jan-
08
SOPAN
OVERSEAS PVT.
LTD
B-314, PHASE-I
OKHLA
INDUSTRIAL
AREA
Consent to Establish granted without
washing, bleaching & dyeing.
28 24823 24-Jan-
08
VISHAL
PLASTICS
F/F/E-35
FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
A letter may be written to the unit
seeking clarification as per the letter of
COI, the permitted activity is air screen
printing whereas the applicant has
made an application for leather
madeups. Also unit be asked to submit
a layout plan and location map
indicating clear dimensions of the unit
and directions so that the exact location
/ boundaries could be known. Copy of
this letter may be endorsed to
Commissioner of Industries.
29 24827 25-Jan-
08
MANCHANDA
INDUSTRIES
C-243, PHASE-II
MAYAPURI
INDUSTRIAL
AREA
Consent to Establish granted.
30 24841 29-Jan-
08
PARAMOUNT
PRODUCTS
PVT. LTD
A-57/1, PHASE-II
OKHLA
INDUSTRIAL
AREA
Consent to Establish granted without
washing, bleaching & dyeing.
31 24845 30-Jan-
08
MICRO ENGG.
WORKS
4./6 KIRTI NAGAR
INDUSTRIAL
AREA
Consent to Establish granted subject to
the condition to submit a layout plan
and location map indicating clear
dimensions of the unit and directions so
that the exact location / boundaries
could be known within 15 days before
issue of Consent to Establish.Details
about electricity connection be also
sought from the unit in the same letter.

32 24846 30-Jan-
08
SURJIT
INDUSTRIES
4./6 KIRTI NAGAR
INDUSTRIAL
AREA
Consent to Establish granted subject to
the condition to submit a layout plan
and location map indicating clear
dimensions of the unit and directions so
that the exact location / boundaries
could be known within 15 days before
issue of Consent to Establish.Details
about electricity connection be also
sought from the unit in the same letter.
2 33 24848 30-Jan-
08
SHYAM
SUNDER METAL
FOUNDRY
WORKS
PLOT NO-123,
POCKET-F,
SECTOR-1
BAWANA
INDUSTRIAL
AREA
A letter may be written to the unit
seeking clarification since, as per the
letter of DSIDC the permitted activity
is air screen printing whereas the
applicant has made an application for
leather madeups. Also unit be asked to
submit a layout plan and location map
indicating clear dimensions of the unit
and directions so that the exact location
/ boundaries could be known. Copy of
this letter may be endorsed to GM,
DSIDC.

<strong>CMC</strong> S.No. ID
No.
Appl.
Date
1 1 21776 12/6/2007 GOEL ATTA
CHAKKI
Name of Unit Address Indl Area Decision of Committee on 05.3.2008
SHOP NO-11,
KG-I/DDA
MARKET,
VIKASPURI
NC-W
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
1 2 21779 12/6/2007 INDU TAPES C-44 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
3 3 21786 12/6/2007 S.S. RADIO
CORPORATION
D-64, PH-I
OKHLA
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days.
2 4 21793 12/6/2007 ANKUR BOX
FACTORY
PLOT NO-A-
12
LAWRENCE
ROAD
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days.

2 5 21794 12/6/2007 ANKUR GENERAL
INDUSTRIES
PLOT NO A-
12
LAWRENCE
ROAD
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days.
1 6 21802 13-06-
2007
KANEBO
COSMTICS
E-22,
FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days.
1 7 21803 13-06-
2007
WHITE GLASS
COMPANY
E-24,
FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days.
1 8 21804 13-06-
2007
KANEBO
COSMETICS
E-30,
FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days.
3 9 21805 13-06-
2007
PUSHPAK
ENTERPRISES
97, DSIDC
SHED,
PHASE-I
OKHLA
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days.

3 10 21806 13-Jun-
2007
PARKASH
PACKING
INDUSTRIES
227, DSIDC
SHED,
PHASE-I
OKHLA
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days.
2 11 21811 13-06-
2007
ACTIVE
ENTERPRISES
307/1/81,
G.F. OLD
ROHTAK
ROAD
SHAHZADA
BAGH
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days.
3 12 21830 14-06-
2007
TARUN &
COMPANY
GI-106,
PHASE-II
MAYAPURI
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days.
3 13 21833 14-06-
2007
SKYLARK
<strong>OF</strong>FSET PVT. LTD
A-35,
PHASE-I
OKHLA
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish under the Orange
Category as the unit generates hazardous waste from the printing
activity. Consent to Operate(Renewal) application under Green
Category becomes infructuous in view of the above reason.
1 14 21842 14-06-
2007
SIF EXPORT PVT.
LTD.
K-
61,ROHTAK
ROAD
UDYOG NAGAR
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.

3 15 21846 15-06-
2007
NARANG
SCIENTIFIC
WORKS
C-255,
PHASE-II
MAYAPURI
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
2 16 21847 15-06-
2007
SHAKTI TOOLS &
PRODUCTS
B-3, PHASE-
II
MANGOL PURI
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
2 17 21850 15-06-
2007
SHREE BALAJI
METAL WORKS
S-49,
PHASE-I
BADLI
INDUSTRIAL
ESTATE
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
2 18 21851 15-06-
2007
KRISHNA
TRADERS
PLOT NO A-
12
LAWRENCE
ROAD
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
1 19 21853 15-06-
2007
PRAKASH SONS
INDUSTRIES
E-1 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.

1 20 21854 15-06-
2007
S.D.
ENTERPRISES
E-2 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
3 21 21860 15-06-
2007
INDUSTRIAL
MOULDERS &
ENGINEERS
B-25/1,
PHASE-II
OKHLA
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
3 22 21878 18-06-
2007
SONY INDIA PVT.
LTD
A-31,
MATHURA
ROAD
MOHAN CO-
OPERATIVE
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
2 23 21880 18-06-
2007
HITECH
HYDRAULICS
PVT. LTD
T-4/35,
PHASE-I
MANGOL PURI
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
1 24 21885 18-06-
2007
SANCHIT
INTERNATIONAL
B-67,
PHASE-II
NARAINA
INDUSTRIAL
AREA PH-II
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.

1 25 21886 18-06-
2007
SUPER PLASTIC
MANUFACTURE
COMPANY
(REGD)
D-34 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
1 26 21891 19-06-
2007
SUPER
INDUSTRIES
E-57 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
1 27 21893 19-06-
2007
ISG S<strong>OF</strong>TWARE
P. LTD
C-7 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
2 28 21894 19-06-
2007
RAVINDER
BEHAL, NEENA
BEHAL
B-18,
PHASE-II
MANGOL PURI
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
3 29 21895 19-06-
2007
DELHI
PNEUMATICS
VALVES
MANUFACTURING
CO. PVT. LTD
63, OKHLA
INDUSTRIAL
ESTATE
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.

3 30 21896 19-06-
2007
AL-CAST
INDUSTRIES
F-32, PHASE-
I
OKHLA
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
31 21898 19-06-
2007
UNIQUE
CORPORATION
E-63 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
32 21910 20-06-
2007
RANI
FABRICATION
E-71 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
33 21911 20-06-
2007
JATIN
FABRICATORS
E-72 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
34 21912 20-06-
2007
JATIN
FABRICATORS
E-59 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.

35 21913 20-06-
2007
SHREE HARI
INDUSTRIES
(INDIA)
E-55 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
36 21914 20-06-
2007
SONU IMPEX
(INDIA)
E-17 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
37 21937 22-06-
2007
NOVA
ASSOCIATES
B-288,
PHASE-I
OKHLA
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
38 21940 22-06-
2007
BAJATO
INDUSTRIES
A-27 GTK ROAD
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
39 21943 22-06-
2007
TAJ PRESS
A-35/4,
PHASE-I
MAYAPURI
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.

40 21958 22-06-
2007
REEMAN
APPLIANCES
PVT. LTD
PLOT NO E,
AUTO
SHOPPING
COMPLEX
ZAMRUDPUR
NC-S
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
41 21964 22-06-
2007
RADHA KISHAN
DASS
S-58,
PHASE-I
BADLI
INDUSTRIAL
ESTATE
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
42 21966 22-06-
2007
GAGAN DEEP
STEEL
C-54 WAZIRPUR
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
43 21971 22-06-
2007
JAKMAN ENGG.
MFG. CO
T-4/30,
PHASE-I
MANGOL PURI
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
44 21978 25-06-
2007
MICKY
ELECTRICAL
SF/D-46
FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.

45 21995 25-06-
2007
SHREE VASU
ENTERPRISES
A-34 WAZIRPUR
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
46 21997 25-06-
2007
DELHI TIN BOX
COMPANY
T-42/147,
PHASE-I
MANGOL PURI
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
47 21999 25-06-
2007
DINESH KAPOOR
T-5/240,
PHASE-I
MANGOL PURI
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
48 22002 26-06-
2007
VELBON
INDUSTRIES
B-232,
PHASE-I
NARAINA
INDUSTRIAL
AREA PH-I
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
49 22003 26-06-
2007
DUGGAR POWER
SUPPLIES
SHED NO-12,
CATEGORY-
II, DSIDC
INDUSTRIAL
COMPLEX,
ROHTAK
ROAD
NANGLOI
DSIDC
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.

50 22006 26-06-
2007
PRECISION
PAPER
PRODUCTS
A-139, DDA
SHEDS,
PHASE-II
OKHLA
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
51 22013 26-06-
2007
MUDHAR ALLIED
TRADERS
PLOT NO C-
126, PHASE-I
MAYAPURI
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
52 22021 26-06-
2007
METRO TRADING
CO
E-9 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
53 22022 26-06-
2007
METRO
GRAPHICS
E-11 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
54 22023 26-06-
2007
JINDAL HOSIERY
FACTORY
A-46 WAZIRPUR
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.

55 22024 26-06-
2007
PROGRESSIVE
PRINTERS
PLOT NO A-
21
JHILMIL
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
56 22025 26-06-
2007
QUALITY TOOLS
& APPLIANCES
PLOT NO-9,
GALI NO-2
FRIENDS
COLONY
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
57 22026 26-06-
2007
BRITE
INDUSTRIES
PLOT NO
308/8
SHAHZADA
BAGH
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
58 22029 26-06-
2007
KEWAL
INDUSTRIES
B-277,
PHASE-I
OKHLA
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
59 22035 27-06-
2007
AVTAR SINGH 494, PHASE -
I
SHAHZADA
BAGH
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.

60 22040 27-06-
2007
JAIN NAME LABEL
CO
A-67/4
GTK ROAD
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
61 22041 27-06-
2007
CHADHA
PRODUCTS
E-15 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
62 22044 27-06-
2007
PUREX
ENGINEERING
WORKS
E-53 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
63 22045 27-06-
2007
PUREX AUTO &
ALLIED
INDUSTRIES
E-54 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
64 22060 27-06-
2007
ABDUL REHMAN
ABDUL AZIZ
491, PHASE-I SHAHZADA
BAGH
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.

65 22062 27-06-
2007
66 22063 27-06-
2007
67 22064 27-06-
2007
68 22071 28-06-
2007
69 22076 28-06-
2007
SUMTI STEELS A-34 WAZIRPUR
INDUSTRIAL
AREA
ROXON TRADING
CO
BHARAT
INDUSTRIAL
WORK
PAUL EXPO
CREATORS
SUN SHINE
STEEL
INDUSTRIES
B-96/4
B-103,
PHASE-I
NARAINA
INDUSTRIAL
AREA PH-I
MAYAPURI
INDUSTRIAL
AREA
D-64 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
A-23/2
NARAINA
INDUSTRIAL
AREA PH-I
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.

70 22078 29-06-
2007
THE NATIONAL
SCIENTIFIC
INSTRUMENTS
CO
B-49,
PHASE-I
MAYAPURI
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
71 22079 29-06-
2007
PARKASH AUTO
INDUSTRIES
E-67 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
72 22080 29-06-
2007
CHADHA AUTO
INDUSTRIES
E-61 FLATTED
FACTORY
COMPLEX,
JHANDEWALAN
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
73 22087 29-06-
2007
ENGG.
CONSULTANT
B-36,
PHASE-I
MAYAPURI
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
74 22091 29-06-
2007
CHAUDHARY
UDYOG
B-2/10,
DSIDC
FLATTED
FACTORY
COMPLEX,
SHAHDARA
JHILMIL
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.

75 22094 29-06-
2007
PURI & SONS
INDUSTRIES
C-101, PH-II
MANGOL PURI
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
76 22095 29-06-
2007
PREM NATH
STEEL SCRAPER
C-100, PH-II
MANGOL PURI
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.
77 22098 29-06-
2007
SANJAY
AGGARWAL
B-279,
PHASE-I
MANGOL PURI
INDUSTRIAL
AREA
Ask the unit to apply for Consent to Establish along with a
layout plan and location map indicating clear dimensions of the
unit and directions so that the exact location / boundaries could
be known within 15 days. Before the unit is sent a letter,
concerned <strong>CMC</strong> to ensure that the unit does not fall within the
purview of <strong>CMC</strong>(Orange). Thereafter a letter may be issued
giving a time frame of 15 days. Details about the electicity
connection should also be sought from the unit in the same letter.