DAM Prezentace EN [pdf]

More documents

Recommendations

Info

Welding Welding is carried out on the shop floor with an area of 3600 m 2 , equipped with four cranes, each with a lifting capacity of 8000 kg. The entrance gate is 4 m wide and 4.2 m high. We also provide welding of sections over 20 t, we are able to process approx. 100 t of material a month - common structural steel (S235, S355). Our Liebherr 100 t mobile crane can be used for loading of heavier pieces. Used welding methods: submerged-arc welding, MAG. We provide outsourced annealing, in a large car-type furnace, including a report - depending on customer demand. We also provide outsourced weld tests, depending on customer demand. We outsource varnishing of parts, depending on customer demand. Welding - references Aktivit Nový Bor s. r. o. Alstom Power, s. r. o. Benteler Maschinenbau CZ, s. r. o. Bohemia Stahlbau s. r. o. CETOS a. s. ČVUT Praha fakulta strojní Fertigungsberatung Beuermann GmbH Gleason Pfauer GmbH Hofmeister s. r. o. In-Centrum s. r. o. Linde Gas, a. s. Praha, Ústí nad Labem Preciosa, a. s. Reis robotics spol. s r.o. SC-Techno GnbH Severočeské vodovody a kanalizace, a. s. Škoda Transportation a. s. TOS, a. s. Čelákovice TOS Varnsdorf a. s. <strong>DAM</strong> Ústí nad Labem www.dam-ul.cz info@dam-ul.cz
Welding The project of Robotized welding workplace was developed for the branch plant in Varnsdorf within the modernization of the company and increase of the competitiveness in the market. This workplace is equipped with a top Japanese robot OTC Daihen with taxiway with 20 m and a controlled positioning device of the tonnage of more than 20,000 kg. This robotized workstation is equipped with a controlled positioning device with the function of a rotary manipulator which allows us to rotate any number of workstations with the possibility to use the positioning device and also the possibility of clamping on the desks for clamp jigs. The welding blowpipe of robot is equipped with a 3D laser search sensor for accurate location of start-point and of weld position. The workstation was put into operation in early 2011. Thanks to its design and size belongs to the largest workplaces in the Czech Republic and Central Europe. the oversize weldments into a required position with a repeated accuracy. Displacement (adjustment) of rotary weldments is possible up to 17 meters. The system is modular and the workspace can be divided into one, two or This robotized workstation substantially increased productivity, quality and accuracy especially of the special technological elements. Also a decrease in production costs and increase in production capacity accompanied by an expansion of offered services have been noted. <strong>DAM</strong> Ústí nad Labem www.dam-ul.cz info@dam-ul.cz
Page 1 and 2: About us - DAM Ústí nad Labem s.
Page 3 and 4: Certificates Certification EN ISO 3
Page 5 and 6: Metalworking Milling machines Name
Page 7: Metalworking Horizontal machines an
Page 11 and 12: Products of the welding plant Stand
Page 13 and 14: Products of the welding plant Welde
Page 15: Contacts Contacts Addresses Owner a

DAM Prezentace EN [pdf]

Create successful ePaper yourself

Delete template?

Save as template?