Static Route - AirLive

1.2 Start to Manage This Switch
Either way user may start to manage this switch, web mode through Ethernet port or terminal
mode through RS232 port.
1,2,1 Web mode default setting are:
Default IP Address: 192.168.1.100
Default IP mask: 255.255.255.0
Default gateway: 192.168.1.254
Default Password airlive
1.2.2 Terminal mode default setting are: baud rate: 115,200, attribute: 8, None, 1, None
Terminal mode operation: (default password is “airlive” )
Once terminal is connected, the basic operation rule are shown below
Press “ “ to find root operation page, then choose command by typing little alphabets
After enter command page, Press “ “ to find command parameters and format,
further more, type “ command “ to get explanation.
Type “ up “ or “ / “ to go back to previous page
5
AriLive Ether-GSH8TW v2 User’s Manual