Static Route - AirLive

More documents

Recommendations

Info

18 AriLive Ether-GSH8TW v2 User’s Manual
2.1.10 RSTP The Spanning-Tree Protocol (STP) is IEEE 802.1d standardized method for avoiding loops in switched networks. Enable STP to ensure that only one path at a time is active between any two nodes on the network. The Rapid-Spanning-Tree-Protocol (RSTP) is a more advanced protocol than STP according to IEEE 802.1w standard. RSTP can shorten spanning tree convergent time while network topology is changed. A default diagram is shown below, RSTP Configuration System Configuration System Priority 32768 Hello Time 2 Max Age 20 Forward Delay 15 Force version Normal Port Configuration Port Protocol Enabled Edge Path Cost Aggregations 1 auto 2 auto 3 auto 4 auto 5 auto 6 auto 7 auto 8 auto Apply Refresh 19 AriLive Ether-GSH8TW v2 User’s Manual
Page 1 and 2: Ether-GSH8TW v2 8-Port Web Managed
Page 3 and 4: Ether-GSH8TWv2 CE Declaration State
Page 5 and 6: 1.0 Introduction AirLive ETHER-GSH8
Page 7 and 8: 1.2 Start to Manage This Switch Eit
Page 9 and 10: 2.1 Configurations 2.1.1 System The
Page 11 and 12: 2.1.3 Port-based VLAN Port-based VL
Page 13 and 14: 2.1.4 Tag-based VLAN Tag-based VLAN
Page 15 and 16: 2.1.5 Port Trunking A default diagr
Page 17 and 18: 2.1.7 Quality of Service A default
Page 19: 2.1.9 LACP Different from the stati
Page 23 and 24: 2.1.11 IGMP The Internet Group Mana
Page 25 and 26: 2.2 Monitoring 2.2.1. Port Statisti
Page 27 and 28: 2.2.3 LACP Status Choose and click
Page 29 and 30: 2.2.5 IGMP Status Choose and click
Page 31 and 32: 2.3.3 Firmware Update Choose and cl
Page 33: System Xmodem System SNMP [enable|d

Static Route - AirLive

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?