GTP - 32 CONTROL PROCESSOR User Manual ... - DNF Controls
GTP - 32 CONTROL PROCESSOR User Manual ... - DNF Controls GTP - 32 CONTROL PROCESSOR User Manual ... - DNF Controls
CHANGE MAXIMUM NUMBER OF LOG FILES PER DAY 1) Click on the System link near the top of the page. 2) Click on the System Maintenance link. 3) Click on the View Event Logs link. 4) The fifth bullet point displays the current number of available log files per day. 5) To modify this setting, click on the link to the right of the current number of available log files per day. 6) In the text field, enter how many log files per day are desired. The minimum amount of log files per day is 4. The maximum amount of log files per day is 12. 7) Click the Set button to save the entered changes. NOTE: This setting change does not take effect until the unit is rebooted. - 42 -
SPECIFICATIONS Power: 100 VAC - 240 VAC power supply, Phihong PSAA60M, supplied with IEC connector Size: 1RU: 1 3/4 inch x 19 inch x 8 1/2 inch (H.W.D.) Weight: 7 lbs Front Panel Display: 2 line x 16 character Front Panel Keyboard: 8 keys with LEDs E – Net #1: RJ45 Connector E – Net #2: RJ45 Connector Not Used LTC Input: 3-pin Phoenix Connector Pin-out for Balanced LTC: Pin 1 = LTC HI Pin 2 = LTC LOW Pin 3 = Common/Shield Pin-out for Unbalanced LTC: Pin 1 = LTC HI Pin 2 = Tie to Pin 3 Pin 3 = Shield REF Video: BNC Connector, Female Not Used Power Connector: 2-Pin Male (CPC Connector) Pin # Function 1 Not Connected 2 +15-28V 3 Ground 4 Not Connected - 43 -
- Page 1 and 2: 12843 Foothill Blvd. Suite C Sylmar
- Page 3 and 4: REVISION HISTORY 2.0 First Draft of
- Page 5 and 6: CONFIGURATION Configuration is requ
- Page 7 and 8: SET PASSWORD The default password,
- Page 9 and 10: 3) Enter any name made up of letter
- Page 11 and 12: GPI The GPI Section is responsible
- Page 13 and 14: 3) For each GPI, do the following:
- Page 15 and 16: The GPO Configuration Table will be
- Page 17 and 18: 3) For each channel, enter a channe
- Page 19 and 20: Ethernet Physical Configuration 1)
- Page 21 and 22: c. Heartbeat - Deprecated d. USP_GP
- Page 23 and 24: 4. In the Local Event Label field,
- Page 25 and 26: 1) Combinatorial Event Setup To vie
- Page 27 and 28: 5) Click on “Save and Exit” to
- Page 29 and 30: 4) A confirmation prompt will be di
- Page 31 and 32: not, an error message will be displ
- Page 33 and 34: 1) Click on the Action Definitions
- Page 35 and 36: ADD A ROW TO THE EVENT MONITORING T
- Page 37 and 38: 5) For each selected row, make the
- Page 39 and 40: 2) Delete a Backup File a. On the w
- Page 41: 4) The Current Log tag notes which
- Page 45 and 46: GPIO CONNECTORS: GPI 1 - 16, GPI 17
- Page 47 and 48: FRONT & REAR VIEWS Front View Rear
- Page 49 and 50: GPI Jumper 1 J7 2 J8 3 J9 4 J10 5 J
- Page 51: LIMITED WARRANTY DNF Controls warra
SPECIFICATIONS<br />
Power: 100 VAC - 240 VAC power supply, Phihong PSAA60M, supplied with<br />
IEC connector<br />
Size: 1RU: 1 3/4 inch x 19 inch x 8 1/2 inch (H.W.D.)<br />
Weight: 7 lbs<br />
Front Panel Display: 2 line x 16 character<br />
Front Panel Keyboard: 8 keys with LEDs<br />
E – Net #1: RJ45 Connector<br />
E – Net #2: RJ45 Connector<br />
Not Used<br />
LTC Input: 3-pin Phoenix Connector<br />
Pin-out for Balanced LTC:<br />
Pin 1 = LTC HI<br />
Pin 2 = LTC LOW<br />
Pin 3 = Common/Shield<br />
Pin-out for Unbalanced LTC:<br />
Pin 1 = LTC HI<br />
Pin 2 = Tie to Pin 3<br />
Pin 3 = Shield<br />
REF Video: BNC Connector, Female<br />
Not Used<br />
Power Connector: 2-Pin Male (CPC Connector)<br />
Pin # Function<br />
1 Not Connected<br />
2 +15-28V<br />
3 Ground<br />
4 Not Connected<br />
- 43 -